Re: CentOS
Manny Marinho <[email protected]>
| Newsgroups | gmane.mail.virus.maiamailguard |
|---|---|
| Message-ID | <CANb-9BnTWE1HDC0+xOSU5UV-Ba03YBjr9jT=Y+LJtsAFC4NwmA@mail.gmail.com> |
Yes it does. On Fri, Apr 17, 2020 at 1:39 PM jjs - mainphrame <[email protected]> wrote: > > Just as a sanity check, does configtest.php still pass? > > Jake > > On Fri, Apr 17, 2020 at 10:27 AM Manny Marinho <[email protected]> wrote: >> >> Thank you! So I started from scratch by creating a new DB keeping in >> mind the other issues I encountered before with the DB creation. All >> went well and what I'm seeing is that once it auto creates the first >> user for a domain it then fails to create any new user after that for >> any domain. It just keeps throwing the below error. The interesting >> thing is that the 0 entry in the error corresponds to the record in >> the DB for the first user that was successfully created. >> >> Apr 17 13:22:53 myhost.mydomain.com ./maiad[5495]: (05495-02) ESMTP> >> 451 4.5.0 Error in processing, id=05495-02, cached FAILED: >> DBD::mysql::st execute failed: Duplicate entry '0' for key >> 'primary_email_idx' >> >> On Fri, Apr 17, 2020 at 11:22 AM jjs - mainphrame <[email protected]> wrote: >> > >> > A duplicate primary key strongly suggests database corruption to me. I've seen that before, once when the power failed, and another time due to me naively removing entries from the maia_users table. (A sharp lesson to only remove users via the maia web interface, or with maiadbtool) >> > >> > The recovery from the power failure corruption involved exporting the maia db, dropping it, and importing it with the innodb_force_recovery option set. In the other case, it was a new install, so the quickest fix was to drop the maia database, recreate it and import the schema, and set up the config in the web console again. >> > >> > Good luck on the DB recovery! >> > >> > Jake >> > >> > >> > >> > On Fri, Apr 17, 2020 at 6:17 AM Manny Marinho <[email protected]> wrote: >> >> >> >> Thank you very much! So I had that feature off, I actually had never >> >> used that feature before. After I turned it on I noticed it created >> >> one user successfully but then after that it kept failing when trying >> >> to create any other users for any other domain (although the domains >> >> already exist). Keeps repeating the same exact error regardless of the >> >> user it's trying to create so I've turned off the feature until I can >> >> figure out how to fix this. >> >> >> >> ./maiad[27427]: (27427-10) ESMTP> 451 4.5.0 Error in processing, >> >> id=27427-10, cached FAILED: DBD::mysql::st execute failed: Duplicate >> >> entry '0' for key 'primary_email_idx' >> >> >> >> >> >> -Manny >> >> >> >> On Fri, Apr 17, 2020 at 1:00 AM jjs - mainphrame <[email protected]> wrote: >> >> > >> >> > Manny - >> >> > >> >> > The centos 6 build here is working well. It was initially having everything passed "CLEAN" with no checks, but after adding the domains, and then seeing the users autocreated, I went into each user's settings and set the protection level to "high". After that, maia started scoring their messages. >> >> > >> >> > The centos 6 install script is "centos-6-testing.sh" but I will make it official after I see another few repeatable builds. >> >> > >> >> > Jake >> >> > >> >> > On Thu, Apr 16, 2020 at 4:58 PM jjs - mainphrame <[email protected]> wrote: >> >> >> >> >> >> I've gotten a centos 6 maia instance up and running, I've uploaded the install script to the repo and will be sending some mail through to see how it performs. Will keep you posted. >> >> >> >> >> >> Jake >> >> >> >> >> >> On Wed, Apr 15, 2020 at 2:12 PM Manny Marinho <[email protected]> wrote: >> >> >>> >> >> >>> I'm also able to create users however in the older version of maia >> >> >>> there was a page that would show all the domains and all the users and >> >> >>> you could see the stats for each domain and all the users as well as >> >> >>> click on an user or domain and manage the spam for either one right >> >> >>> there. I'll try to find a screen shot and send you so you can see what >> >> >>> I mean. >> >> >>> >> >> >>> On Wed, Apr 15, 2020 at 4:31 PM jjs - mainphrame <[email protected]> wrote: >> >> >>> > >> >> >>> > Ah, very interesting, thanks for the details. I'm able to create domains and users here, but I don't use cpanel, so that's an unknown factor in the equation. Hope things go more smoothly with the changes you've made. >> >> >>> > >> >> >>> > Jake >> >> >>> > >> >> >>> > On Wed, Apr 15, 2020 at 1:11 PM Manny Marinho <[email protected]> wrote: >> >> >>> >> >> >> >>> >> Sorry about the delay Jake. I run a dedicated server that hosts e-mail >> >> >>> >> for multiple domains. I have created the various domains within maia. >> >> >>> >> I have only setup one user which is the admin user, the customers >> >> >>> >> unfortunately don't really manage their own spam so I take care of >> >> >>> >> that for them. All the domains are currently set to high protection >> >> >>> >> level. In the old maia version in addition to creating a domain I >> >> >>> >> could also create a user under that domain and manage the spam for >> >> >>> >> that user under the admin. That functionality no longer seems to be >> >> >>> >> present or perhaps it works differently now. So in the past I could >> >> >>> >> create domain.com and [email protected] and manage the spam for both. >> >> >>> >> The reason why I would do that is because there are always some users >> >> >>> >> that are more important and/or receive more spam so this allows for >> >> >>> >> finer control. So I may create a bunch of individual users under a >> >> >>> >> particular domain then I would manage spam under the domain and those >> >> >>> >> users. I have configured the setting that allows the admin to read >> >> >>> >> mail for all users. Now I just discovered part of my issue or perhaps >> >> >>> >> the root cause is my Spamassassin install which was all messed up on >> >> >>> >> the server, I run a cpanel server and my host just engaged cpanel to >> >> >>> >> get that squared away. Now that Spamassassin is fixed it's just >> >> >>> >> starting to build the bayes DB, I'm also storing the bayes data in the >> >> >>> >> maia database if that makes any difference. >> >> >>> >> >> >> >>> >> Apr 15 15:51:16.162 [28812] dbg: bayes: using username: amavis >> >> >>> >> Apr 15 15:51:16.162 [28812] dbg: bayes: learner_new: got >> >> >>> >> store=Mail::SpamAssassin::BayesStore::SQL=HASH(0x3cce0e8) >> >> >>> >> Apr 15 15:51:16.162 [28812] dbg: plugin: >> >> >>> >> Mail::SpamAssassin::Plugin::Bayes=HASH(0x48143f0) implements >> >> >>> >> 'learner_is_scan_available', priority 0 >> >> >>> >> Apr 15 15:51:16.170 [28812] dbg: bayes: database connection established >> >> >>> >> Apr 15 15:51:16.170 [28812] dbg: bayes: found bayes db version 3 >> >> >>> >> Apr 15 15:51:16.171 [28812] dbg: bayes: Using userid: 1 >> >> >>> >> Apr 15 15:51:16.171 [28812] dbg: bayes: not available for scanning, >> >> >>> >> only 15 spam(s) in bayes DB < 50 >> >> >>> >> Apr 15 15:51:16.171 [28812] dbg: config: score set 1 chosen. >> >> >>> >> Apr 15 15:51:16.172 [28812] dbg: dns: EDNS, UDP payload size 4096 >> >> >>> >> Apr 15 15:51:16.172 [28812] dbg: dns: servers obtained from Net::DNS : >> >> >>> >> [127.0.0.1]:53, [10.10.10.10]:53 >> >> >>> >> Apr 15 15:51:16.172 [28812] dbg: dns: nameservers set to 127.0.0.1, 10.10.10.10 >> >> >>> >> Apr 15 15:51:16.172 [28812] dbg: dns: using socket module: >> >> >>> >> IO::Socket::IP version 0.39 >> >> >>> >> Apr 15 15:51:16.172 [28812] dbg: dns: is Net::DNS::Resolver available? yes >> >> >>> >> Apr 15 15:51:16.172 [28812] dbg: dns: Net::DNS version: 0.68 >> >> >>> >> Apr 15 15:51:16.172 [28812] dbg: sa-learn: spamtest initialized >> >> >>> >> Apr 15 15:51:16.172 [28812] dbg: plugin: >> >> >>> >> Mail::SpamAssassin::Plugin::Bayes=HASH(0x48143f0) implements >> >> >>> >> 'learner_dump_database', priority 0 >> >> >>> >> Apr 15 15:51:16.173 [28812] dbg: bayes: database connection established >> >> >>> >> Apr 15 15:51:16.173 [28812] dbg: bayes: found bayes db version 3 >> >> >>> >> Apr 15 15:51:16.173 [28812] dbg: bayes: Using userid: 1 >> >> >>> >> >> >> >>> >> 0.000 0 3 0 non-token data: bayes db version >> >> >>> >> 0.000 0 15 0 non-token data: nspam >> >> >>> >> 0.000 0 42 0 non-token data: nham >> >> >>> >> 0.000 0 12004 0 non-token data: ntokens >> >> >>> >> 0.000 0 1586540621 0 non-token data: oldest atime >> >> >>> >> 0.000 0 1586980261 0 non-token data: newest atime >> >> >>> >> 0.000 0 0 0 non-token data: last journal sync atime >> >> >>> >> 0.000 0 1586533304 0 non-token data: last expiry atime >> >> >>> >> 0.000 0 0 0 non-token data: last expire atime delta >> >> >>> >> 0.000 0 0 0 non-token data: last expire >> >> >>> >> reduction count >> >> >>> >> >> >> >>> >> >> >> >>> >> -Manny >> >> >>> >> >> >> >>> >> On Fri, Apr 10, 2020 at 2:25 PM jjs - mainphrame <[email protected]> wrote: >> >> >>> >> > >> >> >>> >> > Just out of curiosity, what is the protection level for the users in question? >> >> >>> >> > >> >> >>> >> > Jake >> >> >>> >> > >> >> >>> >> > On Fri, Apr 10, 2020 at 8:17 AM jjs - mainphrame <[email protected]> wrote: >> >> >>> >> >> >> >> >>> >> >> Thanks for the exim details Manny - >> >> >>> >> >> >> >> >>> >> >> As for your spam detection, are the users in question in the maia database? >> >> >>> >> >> >> >> >>> >> >> Here, I had to add the domains in order for users from those domains to be autocreated. >> >> >>> >> >> >> >> >>> >> >> Jake >> >> >>> >> >> >> >> >>> >> >> On Fri, Apr 10, 2020 at 6:24 AM Manny Marinho <[email protected]> wrote: >> >> >>> >> >>> >> >> >>> >> >>> Jake here is my exim configuration, I tried to use what David is using >> >> >>> >> >>> on my server but it didn't work for me, exim gave some start up >> >> >>> >> >>> errors. That could be related to my server though as my current exim >> >> >>> >> >>> config file is not based on the latest exim build, it's now a few >> >> >>> >> >>> updates behind. I haven't had the time to merge my config with the >> >> >>> >> >>> latest version but will do that soon. I have everything up and running >> >> >>> >> >>> now and have setup a few domains however regardless of what protection >> >> >>> >> >>> levels I'm setting (either high or even setting them manually) no >> >> >>> >> >>> messages are being cached within the maia interface at all for any >> >> >>> >> >>> domain, I also don't see anything being written to the DB. I also use >> >> >>> >> >>> the setting on all my domains to cache all non-spam which isn't >> >> >>> >> >>> happening either. There are messages hitting maia because I see the >> >> >>> >> >>> activity on the maia log but they all say Passed Clean. This is >> >> >>> >> >>> essentially the same issue I was seeing a few months ago when I >> >> >>> >> >>> decided to install and try the technion maia build. Any ideas what may >> >> >>> >> >>> be causing this or how I can figure this out? Thank you all very much >> >> >>> >> >>> for all your help. >> >> >>> >> >>> >> >> >>> >> >>> My Router: >> >> >>> >> >>> >> >> >>> >> >>> amavis: >> >> >>> >> >>> driver = manualroute >> >> >>> >> >>> condition = "${if eq {$interface_port}{10025} {0}{1}}" >> >> >>> >> >>> condition = "${if eq {$spam_score_int}{}{1}{${if <= >> >> >>> >> >>> {${spam_score_int}}{00}{0}{1}}}}" >> >> >>> >> >>> domains = +local_domains >> >> >>> >> >>> transport = amavis >> >> >>> >> >>> route_list = "* localhost byname" >> >> >>> >> >>> self = send >> >> >>> >> >>> verify_recipient = false >> >> >>> >> >>> >> >> >>> >> >>> >> >> >>> >> >>> My Transport: >> >> >>> >> >>> >> >> >>> >> >>> amavis: >> >> >>> >> >>> driver = smtp >> >> >>> >> >>> port = 10024 >> >> >>> >> >>> allow_localhost >> >> >>> >> >>> >> >> >>> >> >>> >> >> >>> >> >>> On Thu, Apr 9, 2020 at 11:52 PM jjs - mainphrame <[email protected]> wrote: >> >> >>> >> >>> > >> >> >>> >> >>> > Thank you, that is useful information. I'll see if I can build a working config with exim. >> >> >>> >> >>> > >> >> >>> >> >>> > Jake >> >> >>> >> >>> > >> >> >>> >> >>> > On Thu, Apr 9, 2020 at 3:22 PM David Byte <[email protected]> wrote: >> >> >>> >> >>> >> >> >> >>> >> >>> >> I’ve got an exim config for you. >> >> >>> >> >>> >> >> >> >>> >> >>> >> I’ve just brought the parts salient to using Maia here. >> >> >>> >> >>> >> >> >> >>> >> >>> >> Start by verifying with routers that do nothing but verify alias, mailing lists, etc. >> >> >>> >> >>> >> Next pass the mail to a router that can send it to the Maia server >> >> >>> >> >>> >> >> >> >>> >> >>> >> check_system_aliases: >> >> >>> >> >>> >> driver = redirect >> >> >>> >> >>> >> allow_fail >> >> >>> >> >>> >> allow_defer >> >> >>> >> >>> >> data = ${lookup{$local_part}lsearch{/etc/aliases}} >> >> >>> >> >>> >> verify_only >> >> >>> >> >>> >> pass_router = amavis >> >> >>> >> >>> >> >> >> >>> >> >>> >> >> >> >>> >> >>> >> And here is the amavis router >> >> >>> >> >>> >> amavis: >> >> >>> >> >>> >> # Do NOT run if received via 10025/tcp or if already spam-scanned >> >> >>> >> >>> >> # or if bounce message ($sender_address="") >> >> >>> >> >>> >> condition = "${if or {{eq {$interface_port}{10025}} \ >> >> >>> >> >>> >> {eq {$received_protocol}{spam-scanned}}\ >> >> >>> >> >>> >> {eq {$received_protocol}{local}}\ >> >> >>> >> >>> >> {eq {$sender_address}{}} \ >> >> >>> >> >>> >> }{0}{1} }" >> >> >>> >> >>> >> transport = amavis >> >> >>> >> >>> >> route_list = "* mailguard.myhost.net byname" >> >> >>> >> >>> >> self = send >> >> >>> >> >>> >> >> >> >>> >> >>> >> >> >> >>> >> >>> >> And this in my transport definition >> >> >>> >> >>> >> amavis: >> >> >>> >> >>> >> driver = smtp >> >> >>> >> >>> >> port = 10024 >> >> >>> >> >>> >> >> >> >>> >> >>> >> >> >> >>> >> >>> >> I hope this helps >> >> >>> >> >>> >> >> >> >>> >> >>> >> On Apr 9, 2020, at 4:54 PM, jjs - mainphrame <[email protected]> wrote: >> >> >>> >> >>> >> >> >> >>> >> >>> >> Manny, >> >> >>> >> >>> >> >> >> >>> >> >>> >> I'd love to see your exim configuration, for future reference. I've always used postfix, but it would be nice to know of a working exim configuration, since more choice is good for all of us. >> >> >>> >> >>> >> >> >> >>> >> >>> >> Jake >> >> >>> >> >>> >> >> >> >>> >> >>> >> On Thu, Apr 9, 2020 at 8:35 AM Manny Marinho <[email protected]> wrote: >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> Hi Jake thanks for the reply. I was able to fix that problem, it >> >> >>> >> >>> >>> appears it was a permissions issue. I ran "maiad debug" and saw this >> >> >>> >> >>> >>> error: >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> Apr 8 19:52:59 mydomain.com ./maiad[18270]: TROUBLE in pre_loop_hook: >> >> >>> >> >>> >>> TEMPBASE directory is not writable: /var/lib/maia/tmp at ./maiad line >> >> >>> >> >>> >>> 8491. >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> Suicide () TROUBLE in pre_loop_hook: TEMPBASE directory is not >> >> >>> >> >>> >>> writable: /var/lib/maia/tmp at ./maiad line 8491. >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> The daemon now starts and runs normally under CentOS 6 and PHP 7.2. I >> >> >>> >> >>> >>> am having another issue however. My configtest.pl tests fine and so >> >> >>> >> >>> >>> does the web configtest.php. I'm using your supplied Smarty version. I >> >> >>> >> >>> >>> created a new maia DB using your manual steps below which produced one >> >> >>> >> >>> >>> error however I don't believe this is significant or the root cause of >> >> >>> >> >>> >>> my problem, >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> [root@host # mysqladmin create maia >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> [root@host # mysql maia < maia-mysql.sql >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> ERROR 1366 (22007) at line 716: Incorrect string value: '\xC2\x9Atina' >> >> >>> >> >>> >>> for column `maia`.`maia_languages`.`language_name` at row 1 >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> I also ran the below afterwards since I use amavis as my maia user, >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> [root]# mysql -u root -p password >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> mysql> GRANT CREATE, DROP, ALTER, SELECT, INSERT, UPDATE, DELETE ON >> >> >>> >> >>> >>> maia.* TO amavis@localhost IDENTIFIED BY 'mypassword'; >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> My problem now is I can't run internal-init.php or >> >> >>> >> >>> >>> login.php?super=register as both produce the error: >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> Error with themes: theme not found or permissions problem. >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> The maia error log shows some generic errors which I don't believe are >> >> >>> >> >>> >>> causing any issue. >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> [09-Apr-2020 08:28:19 America/Los_Angeles] PHP Deprecated: Methods >> >> >>> >> >>> >>> with the same name as their class will not be constructors in a future >> >> >>> >> >>> >>> version of PHP; ThemeSmarty has a deprecated constructor in >> >> >>> >> >>> >>> /home/folder/public_html/maia/smarty.php on line 85 >> >> >>> >> >>> >>> [09-Apr-2020 08:28:19 America/Los_Angeles] PHP Deprecated: Methods >> >> >>> >> >>> >>> with the same name as their class will not be constructors in a future >> >> >>> >> >>> >>> version of PHP; Smarty has a deprecated constructor in >> >> >>> >> >>> >>> /usr/local/lib/php/Smarty2/Smarty.class.php on line 64 >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> All my web facing files sit in /home/folder/public_html/maia/ instead >> >> >>> >> >>> >>> of /var/www/html/maia/ this is very similar to an old maia setup I >> >> >>> >> >>> >>> used to have running in the past. >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> -Manny >> >> >>> >> >>> >>> >> >> >>> >> >>> >>> On Wed, Apr 8, 2020 at 11:11 PM <[email protected]> wrote: >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > Send Maia-users mailing list submissions to >> >> >>> >> >>> >>> > [email protected] >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > To subscribe or unsubscribe via the World Wide Web, visit >> >> >>> >> >>> >>> > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >>> > or, via email, send a message with subject or body 'help' to >> >> >>> >> >>> >>> > [email protected] >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > You can reach the person managing the list at >> >> >>> >> >>> >>> > [email protected] >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > When replying, please edit your Subject line so it is more specific >> >> >>> >> >>> >>> > than "Re: Contents of Maia-users digest..." >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > Today's Topics: >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > 1. CentOS 6 (Manny Marinho) >> >> >>> >> >>> >>> > 2. Re: CentOS 6 (jjs - mainphrame) >> >> >>> >> >>> >>> > 3. Re: CentOS 6 (Ed) >> >> >>> >> >>> >>> > 4. Re: CentOS 6 (Lawrence Mulder) >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > ---------------------------------------------------------------------- >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > Message: 1 >> >> >>> >> >>> >>> > Date: Wed, 8 Apr 2020 18:21:38 -0400 >> >> >>> >> >>> >>> > From: Manny Marinho <[email protected]> >> >> >>> >> >>> >>> > To: [email protected] >> >> >>> >> >>> >>> > Subject: [Maia-users] CentOS 6 >> >> >>> >> >>> >>> > Message-ID: <[email protected]> >> >> >>> >> >>> >>> > Content-Type: text/plain; charset=utf-8 >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > I know it’s end of life but has anybody gotten this to work with CentOS 6? I’ve tried to use the installer for CentOS 7 which appears to work for the most part although my MTA is exim and I’m familiar with the exim config part from using the original maia version. Seems the issue that I’m seeing is the maia daemon won’t start or nothing happens when you try to run it manually. >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > -Manny >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > > On Apr 8, 2020, at 3:00 PM, [email protected] wrote: >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > Send Maia-users mailing list submissions to >> >> >>> >> >>> >>> > > [email protected] >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > To subscribe or unsubscribe via the World Wide Web, visit >> >> >>> >> >>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >>> > > or, via email, send a message with subject or body 'help' to >> >> >>> >> >>> >>> > > [email protected] >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > You can reach the person managing the list at >> >> >>> >> >>> >>> > > [email protected] >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > When replying, please edit your Subject line so it is more specific >> >> >>> >> >>> >>> > > than "Re: Contents of Maia-users digest..." >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > Today's Topics: >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > 1. maia on suse leap 15.1 (jjs - mainphrame) >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > ---------------------------------------------------------------------- >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > Message: 1 >> >> >>> >> >>> >>> > > Date: Tue, 7 Apr 2020 21:35:12 -0700 >> >> >>> >> >>> >>> > > From: jjs - mainphrame <[email protected]> >> >> >>> >> >>> >>> > > To: [email protected] >> >> >>> >> >>> >>> > > Subject: [Maia-users] maia on suse leap 15.1 >> >> >>> >> >>> >>> > > Message-ID: >> >> >>> >> >>> >>> > > <CABkzw7wTuPkJ77uanv69q9CZTEiiDffPv8zatfN=M_Wa0Mf0Ww@mail.gmail.com> >> >> >>> >> >>> >>> > > Content-Type: text/plain; charset="utf-8" >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > Hi folks, >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > My goal today was to achieve a working maia install on suse leap 15.1 >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > It comes as no surprise that the perl parts all work perfectly and >> >> >>> >> >>> >>> > > configtest.pl is fine. >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > But I'm seeing weird errors with php and pear. The pear modules are >> >> >>> >> >>> >>> > > installed, pear list shows them, but configtest.php can't find them. >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > I'll keep chipping away at it, but thought I'd check to see if anyone on >> >> >>> >> >>> >>> > > the list has had any luck with maia on suse leap and php 7.x, or any words >> >> >>> >> >>> >>> > > of wisdom on that score - >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > Cheers, >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > Jake >> >> >>> >> >>> >>> > > -------------- next part -------------- >> >> >>> >> >>> >>> > > An HTML attachment was scrubbed... >> >> >>> >> >>> >>> > > URL: <http://www.renaissoft.com/pipermail/maia-users/attachments/20200407/40e3a392/attachment-0001.html> >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > ------------------------------ >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > Subject: Digest Footer >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > _______________________________________________ >> >> >>> >> >>> >>> > > Maia-users mailing list >> >> >>> >> >>> >>> > > [email protected] >> >> >>> >> >>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > ------------------------------ >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > End of Maia-users Digest, Vol 171, Issue 2 >> >> >>> >> >>> >>> > > ****************************************** >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > ------------------------------ >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > Message: 2 >> >> >>> >> >>> >>> > Date: Wed, 8 Apr 2020 16:29:52 -0700 >> >> >>> >> >>> >>> > From: jjs - mainphrame <[email protected]> >> >> >>> >> >>> >>> > To: Manny Marinho <[email protected]> >> >> >>> >> >>> >>> > Cc: [email protected] >> >> >>> >> >>> >>> > Subject: Re: [Maia-users] CentOS 6 >> >> >>> >> >>> >>> > Message-ID: >> >> >>> >> >>> >>> > <CABkzw7xVWngB0zT7JAR5LQ2rd+bYxfGHSYNU5C1rWazHoXX=CA@mail.gmail.com> >> >> >>> >> >>> >>> > Content-Type: text/plain; charset="utf-8" >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > Does configtest.pl work? When you start maiad by hand, are there any >> >> >>> >> >>> >>> > errors? I think I've run maia on centos 6 in the past. >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > Jake >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > On Wed, Apr 8, 2020 at 4:25 PM Manny Marinho <[email protected]> >> >> >>> >> >>> >>> > wrote: >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > > I know it’s end of life but has anybody gotten this to work with CentOS 6? >> >> >>> >> >>> >>> > > I’ve tried to use the installer for CentOS 7 which appears to work for the >> >> >>> >> >>> >>> > > most part although my MTA is exim and I’m familiar with the exim config >> >> >>> >> >>> >>> > > part from using the original maia version. Seems the issue that I’m seeing >> >> >>> >> >>> >>> > > is the maia daemon won’t start or nothing happens when you try to run it >> >> >>> >> >>> >>> > > manually. >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > -Manny >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > > On Apr 8, 2020, at 3:00 PM, [email protected] wrote: >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Send Maia-users mailing list submissions to >> >> >>> >> >>> >>> > > > [email protected] >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > To subscribe or unsubscribe via the World Wide Web, visit >> >> >>> >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >>> > > > or, via email, send a message with subject or body 'help' to >> >> >>> >> >>> >>> > > > [email protected] >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > You can reach the person managing the list at >> >> >>> >> >>> >>> > > > [email protected] >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > When replying, please edit your Subject line so it is more specific >> >> >>> >> >>> >>> > > > than "Re: Contents of Maia-users digest..." >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Today's Topics: >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > 1. maia on suse leap 15.1 (jjs - mainphrame) >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > ---------------------------------------------------------------------- >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Message: 1 >> >> >>> >> >>> >>> > > > Date: Tue, 7 Apr 2020 21:35:12 -0700 >> >> >>> >> >>> >>> > > > From: jjs - mainphrame <[email protected]> >> >> >>> >> >>> >>> > > > To: [email protected] >> >> >>> >> >>> >>> > > > Subject: [Maia-users] maia on suse leap 15.1 >> >> >>> >> >>> >>> > > > Message-ID: >> >> >>> >> >>> >>> > > > <CABkzw7wTuPkJ77uanv69q9CZTEiiDffPv8zatfN=M_Wa0Mf0Ww@mail.gmail.com> >> >> >>> >> >>> >>> > > > Content-Type: text/plain; charset="utf-8" >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Hi folks, >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > My goal today was to achieve a working maia install on suse leap 15.1 >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > It comes as no surprise that the perl parts all work perfectly and >> >> >>> >> >>> >>> > > > configtest.pl is fine. >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > But I'm seeing weird errors with php and pear. The pear modules are >> >> >>> >> >>> >>> > > > installed, pear list shows them, but configtest.php can't find them. >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > I'll keep chipping away at it, but thought I'd check to see if anyone on >> >> >>> >> >>> >>> > > > the list has had any luck with maia on suse leap and php 7.x, or any >> >> >>> >> >>> >>> > > words >> >> >>> >> >>> >>> > > > of wisdom on that score - >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Cheers, >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Jake >> >> >>> >> >>> >>> > > > -------------- next part -------------- >> >> >>> >> >>> >>> > > > An HTML attachment was scrubbed... >> >> >>> >> >>> >>> > > > URL: < >> >> >>> >> >>> >>> > > http://www.renaissoft.com/pipermail/maia-users/attachments/20200407/40e3a392/attachment-0001.html >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > ------------------------------ >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Subject: Digest Footer >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > _______________________________________________ >> >> >>> >> >>> >>> > > > Maia-users mailing list >> >> >>> >> >>> >>> > > > [email protected] >> >> >>> >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > ------------------------------ >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > End of Maia-users Digest, Vol 171, Issue 2 >> >> >>> >> >>> >>> > > > ****************************************** >> >> >>> >> >>> >>> > > _______________________________________________ >> >> >>> >> >>> >>> > > Maia-users mailing list >> >> >>> >> >>> >>> > > [email protected] >> >> >>> >> >>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > -------------- next part -------------- >> >> >>> >> >>> >>> > An HTML attachment was scrubbed... >> >> >>> >> >>> >>> > URL: <http://www.renaissoft.com/pipermail/maia-users/attachments/20200408/615d172d/attachment-0001.html> >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > ------------------------------ >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > Message: 3 >> >> >>> >> >>> >>> > Date: Wed, 8 Apr 2020 23:07:42 -0400 >> >> >>> >> >>> >>> > From: Ed <[email protected]> >> >> >>> >> >>> >>> > To: [email protected] >> >> >>> >> >>> >>> > Subject: Re: [Maia-users] CentOS 6 >> >> >>> >> >>> >>> > Message-ID: <[email protected]> >> >> >>> >> >>> >>> > Content-Type: text/plain; charset=utf-8; format=flowed >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > I've been running maia on centos6 for years and it works just fine. >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > --Ed >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > On 4/8/20 7:29 PM, jjs - mainphrame wrote: >> >> >>> >> >>> >>> > > Does configtest.pl <http://configtest.pl> work? When you start maiad by >> >> >>> >> >>> >>> > > hand, are there any errors? I think I've run maia on centos 6 in the past. >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > Jake >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > On Wed, Apr 8, 2020 at 4:25 PM Manny Marinho <[email protected] >> >> >>> >> >>> >>> > > <mailto:[email protected]>> wrote: >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > I know it’s end of life but has anybody gotten this to work with >> >> >>> >> >>> >>> > > CentOS 6? I’ve tried to use the installer for CentOS 7 which appears >> >> >>> >> >>> >>> > > to work for the most part although my MTA is exim and I’m familiar >> >> >>> >> >>> >>> > > with the exim config part from using the original maia version. >> >> >>> >> >>> >>> > > Seems the issue that I’m seeing is the maia daemon won’t start or >> >> >>> >> >>> >>> > > nothing happens when you try to run it manually. >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > -Manny >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > > On Apr 8, 2020, at 3:00 PM, [email protected] >> >> >>> >> >>> >>> > > <mailto:[email protected]> wrote: >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Send Maia-users mailing list submissions to >> >> >>> >> >>> >>> > > > [email protected] <mailto:[email protected]> >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > To subscribe or unsubscribe via the World Wide Web, visit >> >> >>> >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >>> > > > or, via email, send a message with subject or body 'help' to >> >> >>> >> >>> >>> > > > [email protected] >> >> >>> >> >>> >>> > > <mailto:[email protected]> >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > You can reach the person managing the list at >> >> >>> >> >>> >>> > > > [email protected] >> >> >>> >> >>> >>> > > <mailto:[email protected]> >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > When replying, please edit your Subject line so it is more specific >> >> >>> >> >>> >>> > > > than "Re: Contents of Maia-users digest..." >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Today's Topics: >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > 1. maia on suse leap 15.1 (jjs - mainphrame) >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > ---------------------------------------------------------------------- >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Message: 1 >> >> >>> >> >>> >>> > > > Date: Tue, 7 Apr 2020 21:35:12 -0700 >> >> >>> >> >>> >>> > > > From: jjs - mainphrame <[email protected] >> >> >>> >> >>> >>> > > <mailto:[email protected]>> >> >> >>> >> >>> >>> > > > To: [email protected] <mailto:[email protected]> >> >> >>> >> >>> >>> > > > Subject: [Maia-users] maia on suse leap 15.1 >> >> >>> >> >>> >>> > > > Message-ID: >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > <CABkzw7wTuPkJ77uanv69q9CZTEiiDffPv8zatfN=M_Wa0Mf0Ww@mail.gmail.com >> >> >>> >> >>> >>> > > <mailto:[email protected]>> >> >> >>> >> >>> >>> > > > Content-Type: text/plain; charset="utf-8" >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Hi folks, >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > My goal today was to achieve a working maia install on suse leap 15.1 >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > It comes as no surprise that the perl parts all work perfectly and >> >> >>> >> >>> >>> > > > configtest.pl <http://configtest.pl> is fine. >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > But I'm seeing weird errors with php and pear. The pear modules are >> >> >>> >> >>> >>> > > > installed, pear list shows them, but configtest.php can't find them. >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > I'll keep chipping away at it, but thought I'd check to see if >> >> >>> >> >>> >>> > > anyone on >> >> >>> >> >>> >>> > > > the list has had any luck with maia on suse leap and php 7.x, or >> >> >>> >> >>> >>> > > any words >> >> >>> >> >>> >>> > > > of wisdom on that score - >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Cheers, >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Jake >> >> >>> >> >>> >>> > > > -------------- next part -------------- >> >> >>> >> >>> >>> > > > An HTML attachment was scrubbed... >> >> >>> >> >>> >>> > > > URL: >> >> >>> >> >>> >>> > > <http://www.renaissoft.com/pipermail/maia-users/attachments/20200407/40e3a392/attachment-0001.html> >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > ------------------------------ >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Subject: Digest Footer >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > _______________________________________________ >> >> >>> >> >>> >>> > > > Maia-users mailing list >> >> >>> >> >>> >>> > > > [email protected] <mailto:[email protected]> >> >> >>> >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > ------------------------------ >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > End of Maia-users Digest, Vol 171, Issue 2 >> >> >>> >> >>> >>> > > > ****************************************** >> >> >>> >> >>> >>> > > _______________________________________________ >> >> >>> >> >>> >>> > > Maia-users mailing list >> >> >>> >> >>> >>> > > [email protected] <mailto:[email protected]> >> >> >>> >> >>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > _______________________________________________ >> >> >>> >> >>> >>> > > Maia-users mailing list >> >> >>> >> >>> >>> > > [email protected] >> >> >>> >> >>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > ------------------------------ >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > Message: 4 >> >> >>> >> >>> >>> > Date: Thu, 9 Apr 2020 03:11:41 +0000 >> >> >>> >> >>> >>> > From: Lawrence Mulder <[email protected]> >> >> >>> >> >>> >>> > To: Ed <[email protected]>, Maia-users_renaissoft.com >> >> >>> >> >>> >>> > <[email protected]> >> >> >>> >> >>> >>> > Subject: Re: [Maia-users] CentOS 6 >> >> >>> >> >>> >>> > Message-ID: <[email protected]> >> >> >>> >> >>> >>> > Content-Type: text/plain; charset="utf-8" >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > Ed, >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > I was going to say the same thing, but I use version 1.0.2c, I think? I assume he is trying to use the latest 1.0.4 stuff being talked about on this list recently, but I'm not sure, LOL. I have never tried the centos 7 / Debian latest maia on centos 6. >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > Thanks, >> >> >>> >> >>> >>> > -Larry >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > From: [email protected] >> >> >>> >> >>> >>> > Sent: April 8, 2020 10:07 PM >> >> >>> >> >>> >>> > To: [email protected] >> >> >>> >> >>> >>> > Subject: Re: [Maia-users] CentOS 6 >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > I've been running maia on centos6 for years and it works just fine. >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > --Ed >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > On 4/8/20 7:29 PM, jjs - mainphrame wrote: >> >> >>> >> >>> >>> > > Does configtest.pl <http://configtest.pl> work? When you start maiad by >> >> >>> >> >>> >>> > > hand, are there any errors? I think I've run maia on centos 6 in the past. >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > Jake >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > On Wed, Apr 8, 2020 at 4:25 PM Manny Marinho <[email protected] >> >> >>> >> >>> >>> > > <mailto:[email protected]>> wrote: >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > I know it’s end of life but has anybody gotten this to work with >> >> >>> >> >>> >>> > > CentOS 6? I’ve tried to use the installer for CentOS 7 which appears >> >> >>> >> >>> >>> > > to work for the most part although my MTA is exim and I’m familiar >> >> >>> >> >>> >>> > > with the exim config part from using the original maia version. >> >> >>> >> >>> >>> > > Seems the issue that I’m seeing is the maia daemon won’t start or >> >> >>> >> >>> >>> > > nothing happens when you try to run it manually. >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > -Manny >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > > On Apr 8, 2020, at 3:00 PM, [email protected] >> >> >>> >> >>> >>> > > <mailto:[email protected]> wrote: >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Send Maia-users mailing list submissions to >> >> >>> >> >>> >>> > > > [email protected] <mailto:[email protected]> >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > To subscribe or unsubscribe via the World Wide Web, visit >> >> >>> >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >>> > > > or, via email, send a message with subject or body 'help' to >> >> >>> >> >>> >>> > > > [email protected] >> >> >>> >> >>> >>> > > <mailto:[email protected]> >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > You can reach the person managing the list at >> >> >>> >> >>> >>> > > > [email protected] >> >> >>> >> >>> >>> > > <mailto:[email protected]> >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > When replying, please edit your Subject line so it is more specific >> >> >>> >> >>> >>> > > > than "Re: Contents of Maia-users digest..." >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Today's Topics: >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > 1. maia on suse leap 15.1 (jjs - mainphrame) >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > ---------------------------------------------------------------------- >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Message: 1 >> >> >>> >> >>> >>> > > > Date: Tue, 7 Apr 2020 21:35:12 -0700 >> >> >>> >> >>> >>> > > > From: jjs - mainphrame <[email protected] >> >> >>> >> >>> >>> > > <mailto:[email protected]>> >> >> >>> >> >>> >>> > > > To: [email protected] <mailto:[email protected]> >> >> >>> >> >>> >>> > > > Subject: [Maia-users] maia on suse leap 15.1 >> >> >>> >> >>> >>> > > > Message-ID: >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > <CABkzw7wTuPkJ77uanv69q9CZTEiiDffPv8zatfN=M_Wa0Mf0Ww@mail.gmail.com >> >> >>> >> >>> >>> > > <mailto:[email protected]>> >> >> >>> >> >>> >>> > > > Content-Type: text/plain; charset="utf-8" >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Hi folks, >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > My goal today was to achieve a working maia install on suse leap 15.1 >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > It comes as no surprise that the perl parts all work perfectly and >> >> >>> >> >>> >>> > > > configtest.pl <http://configtest.pl> is fine. >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > But I'm seeing weird errors with php and pear. The pear modules are >> >> >>> >> >>> >>> > > > installed, pear list shows them, but configtest.php can't find them. >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > I'll keep chipping away at it, but thought I'd check to see if >> >> >>> >> >>> >>> > > anyone on >> >> >>> >> >>> >>> > > > the list has had any luck with maia on suse leap and php 7.x, or >> >> >>> >> >>> >>> > > any words >> >> >>> >> >>> >>> > > > of wisdom on that score - >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Cheers, >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Jake >> >> >>> >> >>> >>> > > > -------------- next part -------------- >> >> >>> >> >>> >>> > > > An HTML attachment was scrubbed... >> >> >>> >> >>> >>> > > > URL: >> >> >>> >> >>> >>> > > <http://www.renaissoft.com/pipermail/maia-users/attachments/20200407/40e3a392/attachment-0001.html> >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > ------------------------------ >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > Subject: Digest Footer >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > _______________________________________________ >> >> >>> >> >>> >>> > > > Maia-users mailing list >> >> >>> >> >>> >>> > > > [email protected] <mailto:[email protected]> >> >> >>> >> >>> >>> > > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > ------------------------------ >> >> >>> >> >>> >>> > > > >> >> >>> >> >>> >>> > > > End of Maia-users Digest, Vol 171, Issue 2 >> >> >>> >> >>> >>> > > > ****************************************** >> >> >>> >> >>> >>> > > _______________________________________________ >> >> >>> >> >>> >>> > > Maia-users mailing list >> >> >>> >> >>> >>> > > [email protected] <mailto:[email protected]> >> >> >>> >> >>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > > _______________________________________________ >> >> >>> >> >>> >>> > > Maia-users mailing list >> >> >>> >> >>> >>> > > [email protected] >> >> >>> >> >>> >>> > > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >>> > > >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > _______________________________________________ >> >> >>> >> >>> >>> > Maia-users mailing list >> >> >>> >> >>> >>> > [email protected] >> >> >>> >> >>> >>> > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >>> > -------------- next part -------------- >> >> >>> >> >>> >>> > An HTML attachment was scrubbed... >> >> >>> >> >>> >>> > URL: <http://www.renaissoft.com/pipermail/maia-users/attachments/20200409/16d3e7df/attachment.html> >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > ------------------------------ >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > Subject: Digest Footer >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > _______________________________________________ >> >> >>> >> >>> >>> > Maia-users mailing list >> >> >>> >> >>> >>> > [email protected] >> >> >>> >> >>> >>> > http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > ------------------------------ >> >> >>> >> >>> >>> > >> >> >>> >> >>> >>> > End of Maia-users Digest, Vol 171, Issue 3 >> >> >>> >> >>> >>> > ****************************************** >> >> >>> >> >>> >>> _______________________________________________ >> >> >>> >> >>> >>> Maia-users mailing list >> >> >>> >> >>> >>> [email protected] >> >> >>> >> >>> >>> http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >> >> >> >>> >> >>> >> _______________________________________________ >> >> >>> >> >>> >> Maia-users mailing list >> >> >>> >> >>> >> [email protected] >> >> >>> >> >>> >> http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users >> >> >>> >> >>> >> >> >> >>> >> >>> >> _______________________________________________ Maia-users mailing list [email protected] http://www.renaissoft.com/cgi-bin/mailman/listinfo/maia-users