Re: Mail::SPF::Query is missing. Installing via CPAN timed out

Remco Barendse <[email protected]> Fri, 11 Jun 2021 23:57:21 +0200 (CEST)
Newsgroups	gmane.mail.virus.mailscanner
Message-ID	<[email protected]>
Loads of stuff that doesn' make any sense to me :


Configuring J/JM/JMEHNLE/mail-spf-query/Mail-SPF-Query-1.999.1.tar.gz with 
Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Mail::SPF::Query
Writing MYMETA.yml and MYMETA.json
   JMEHNLE/mail-spf-query/Mail-SPF-Query-1.999.1.tar.gz
   /usr/bin/perl Makefile.PL INSTALLDIRS=site -- OK
Running make for J/JM/JMEHNLE/mail-spf-query/Mail-SPF-Query-1.999.1.tar.gz
CPAN: Module::CoreList loaded ok (v5.20190522)
cp lib/Mail/SPF/Query.pm blib/lib/Mail/SPF/Query.pm
cp bin/spfd blib/script/spfd
"/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/spfd
cp bin/spfquery blib/script/spfquery
"/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- 
blib/script/spfquery
Manifying 2 pod documents
Manifying 1 pod document
   JMEHNLE/mail-spf-query/Mail-SPF-Query-1.999.1.tar.gz
   /usr/bin/make -- OK
Running make test for JMEHNLE/mail-spf-query/Mail-SPF-Query-1.999.1.tar.gz
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" 
"-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 
'blib/lib', 'blib/arch')" t/*.t
t/00_all.t .. 3/223 # Test 3 got: "unknown" (t/00_all.t at line 127 fail 
#2)
#   Expected: "neutral"
#  t/00_all.t line 127 is:         my $ok = ok($result, 
$expected_result);
# Detailed debug log for test(s) 3:
# |         01.spf1-test.mailzone.com new: ipv4=192.0.2.1, 
sender=01.spf1-test.mailzone.com, helo=01.spf1-test.mailzone.com
# |        postmaster 01.spf1-test.mailzone.com localpart is postmaster
# ||       postmaster 01.spf1-test.mailzone.com   DirectiveSet->new(): 
doing TXT query on 01.spf1-test.mailzone.com
# ||       postmaster 01.spf1-test.mailzone.com   myquery: doing TXT query 
on 01.spf1-test.mailzone.com
# ||       postmaster 01.spf1-test.mailzone.com   myquery: 
01.spf1-test.mailzone.com TXT failed: NXDOMAIN.
# ||       postmaster 01.spf1-test.mailzone.com   DirectiveSet->new(): TXT 
query on 01.spf1-test.mailzone.com returned error=, 
last_dns_error=NXDOMAIN
# ||       postmaster 01.spf1-test.mailzone.com   DirectiveSet->new(): SPF 
policy:
# ||       postmaster 01.spf1-test.mailzone.com no SPF record found for 
01.spf1-test.mailzone.com
# ||       postmaster 01.spf1-test.mailzone.com header_comment: spf_source 
= domain of 01.spf1-test.mailzone.com
# ||       postmaster 01.spf1-test.mailzone.com header_comment: 
spf_source_type = original-spf-record
t/00_all.t .. 4/223 # Test 4 got: "unknown" (t/00_all.t at line 127 fail 
#3)
#   Expected: "fail"
# Detailed debug log for test(s) 4:
# |         02.spf1-test.mailzone.com new: ipv4=192.0.2.1, 
sender=02.spf1-test.mailzone.com, helo=02.spf1-test.mailzone.com
# |        postmaster 02.spf1-test.mailzone.com localpart is postmaster
# ||       postmaster 02.spf1-test.mailzone.com   DirectiveSet->new(): 
doing TXT query on 02.spf1-test.mailzone.com
# ||       postmaster 02.spf1-test.mailzone.com   myquery: doing TXT query 
on 02.spf1-test.mailzone.com
# ||       postmaster 02.spf1-test.mailzone.com   myquery: 
02.spf1-test.mailzone.com TXT failed: NXDOMAIN.
# ||       postmaster 02.spf1-test.mailzone.com   DirectiveSet->new(): TXT 
query on 02.spf1-test.mailzone.com returned error=, 
last_dns_error=NXDOMAIN
# ||       postmaster 02.spf1-test.mailzone.com   DirectiveSet->new(): SPF 
policy:
# ||       postmaster 02.spf1-test.mailzone.com no SPF record found for 
02.spf1-test.mailzone.com
# ||       postmaster 02.spf1-test.mailzone.com header_comment: spf_source 
= domain of 02.spf1-test.mailzone.com
# ||       postmaster 02.spf1-test.mailzone.com header_comment: 
spf_source_type = original-spf-record
t/00_all.t .. 5/223 # Test 5 got: "unknown" (t/00_all.t at line 127 fail 
#4)
#   Expected: "softfail"
# Detailed debug log for test(s) 5:
# |         03.spf1-test.mailzone.com new: ipv4=192.0.2.1, 
sender=03.spf1-test.mailzone.com, helo=03.spf1-test.mailzone.com
# |        postmaster 03.spf1-test.mailzone.com localpart is postmaster
# ||       postmaster 03.spf1-test.mailzone.com   DirectiveSet->new(): 
doing TXT query on 03.spf1-test.mailzone.com
# ||       postmaster 03.spf1-test.mailzone.com   myquery: doing TXT query 
on 03.spf1-test.mailzone.com
# ||       postmaster 03.spf1-test.mailzone.com   myquery: 
03.spf1-test.mailzone.com TXT failed: NXDOMAIN.
# ||       postmaster 03.spf1-test.mailzone.com   DirectiveSet->new(): TXT 
query on 03.spf1-test.mailzone.com returned error=, 
last_dns_error=NXDOMAIN
# ||       postmaster 03.spf1-test.mailzone.com   DirectiveSet->new(): SPF 
policy:
# ||       postmaster 03.spf1-test.mailzone.com no SPF record found for 
03.spf1-test.mailzone.com
# ||       postmaster 03.spf1-test.mailzone.com header_comment: spf_source 
= domain of 03.spf1-test.mailzone.com
# ||       postmaster 03.spf1-test.mailzone.com header_comment: 
spf_source_type = original-spf-record
t/00_all.t .. 6/223 # Test 6 got: "unknown" (t/00_all.t at line 127 fail 
#5)
#   Expected: "fail"
# Detailed debug log for test(s) 6:
# |         05.spf1-test.mailzone.com new: ipv4=192.0.2.1, 
sender=05.spf1-test.mailzone.com, helo=05.spf1-test.mailzone.com
# |        postmaster 05.spf1-test.mailzone.com localpart is postmaster
# ||       postmaster 05.spf1-test.mailzone.com   DirectiveSet->new(): 
doing TXT query on 05.spf1-test.mailzone.com
# ||       postmaster 05.spf1-test.mailzone.com   myquery: doing TXT query 
on 05.spf1-test.mailzone.com
# ||       postmaster 05.spf1-test.mailzone.com   myquery: 
05.spf1-test.mailzone.com TXT failed: NXDOMAIN.
# ||       postmaster 05.spf1-test.mailzone.com   DirectiveSet->new(): TXT 
query on 05.spf1-test.mailzone.com returned error=, 
last_dns_error=NXDOMAIN
# ||       postmaster 05.spf1-test.mailzone.com   DirectiveSet->new(): SPF 
policy:
# ||       postmaster 05.spf1-test.mailzone.com no SPF record found for 
05.spf1-test.mailzone.com
# ||       postmaster 05.spf1-test.mailzone.com header_comment: spf_source 
= domain of 05.spf1-test.mailzone.com
t/00_all.t .. 7/223 # Test 7 got: "unknown" (t/00_all.t at line 127 fail 
#6)ype = original-spf-record
#   Expected: "neutral"
# Test 9 got: "error in processing during lookup of 
06.spf1-test.mailzone.com" (t/00_all.t at line 130)
#   Expected: "192.0.2.1 is neither permitted nor denied by domain of 
06.spf1-test.mailzone.com"
#  t/00_all.t line 130 is:            $ok = ok($header_comment, 
$expected_header_comment) && $ok;
# Detailed debug log for test(s) 7,8,9:
# |         06.spf1-test.mailzone.com new: ipv4=192.0.2.1, 
sender=06.spf1-test.mailzone.com, helo=06.spf1-test.mailzone.com
# |        postmaster 06.spf1-test.mailzone.com localpart is postmaster
# ||       postmaster 06.spf1-test.mailzone.com   DirectiveSet->new(): 
doing TXT query on 06.spf1-test.mailzone.com
# ||       postmaster 06.spf1-test.mailzone.com   myquery: doing TXT query 
on 06.spf1-test.mailzone.com
# ||       postmaster 06.spf1-test.mailzone.com   myquery: 
06.spf1-test.mailzone.com TXT failed: NXDOMAIN.
# ||       postmaster 06.spf1-test.mailzone.com   DirectiveSet->new(): TXT 
query on 06.spf1-test.mailzone.com returned error=, 
last_dns_error=NXDOMAIN
# ||       postmaster 06.spf1-test.mailzone.com   DirectiveSet->new(): SPF 
policy:
# ||       postmaster 06.spf1-test.mailzone.com no SPF record found for 
06.spf1-test.mailzone.com
# ||       postmaster 06.spf1-test.mailzone.com header_comment: spf_source 
= domain of 06.spf1-test.mailzone.com
# ||       postmaster 06.spf1-test.mailzone.com header_comment: 
spf_source_type = original-spf-record
t/00_all.t .. 10/223 # Test 10 got: "unknown" (t/00_all.t at line 127 fail 
#7)
#    Expected: "none"
# Detailed debug log for test(s) 10:
# |         07.spf1-test.mailzone.com new: ipv4=192.0.2.1, 
sender=07.spf1-test.mailzone.com, helo=07.spf1-test.mailzone.com
# |        postmaster 07.spf1-test.mailzone.com localpart is postmaster
# ||       postmaster 07.spf1-test.mailzone.com   DirectiveSet->new(): 
doing TXT query on 07.spf1-test.mailzone.com
# ||       postmaster 07.spf1-test.mailzone.com   myquery: doing TXT query 
on 07.spf1-test.mailzone.com
# ||       postmaster 07.spf1-test.mailzone.com   myquery: 
07.spf1-test.mailzone.com TXT failed: NXDOMAIN.
# ||       postmaster 07.spf1-test.mailzone.com   DirectiveSet->new(): TXT 
query on 07.spf1-test.mailzone.com returned error=, 
last_dns_error=NXDOMAIN
# ||       postmaster 07.spf1-test.mailzone.com   DirectiveSet->new(): SPF 
policy:
# ||       postmaster 07.spf1-test.mailzone.com no SPF record found for 
07.spf1-test.mailzone.com
# ||       postmaster 07.spf1-test.mailzone.com header_comment: spf_source 
= domain of 07.spf1-test.mailzone.com
# ||       postmaster 07.spf1-test.mailzone.com header_comment: 
spf_source_type = original-spf-record
t/00_all.t .. 12/223 # Test 12 got: "unknown" (t/00_all.t at line 127 fail 
#9)
#    Expected: "fail"
# Detailed debug log for test(s) 12:
# |         10.spf1-test.mailzone.com new: ipv4=192.0.2.1, 
sender=10.spf1-test.mailzone.com, helo=10.spf1-test.mailzone.com
# |        postmaster 10.spf1-test.mailzone.com localpart is postmaster
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): 
doing TXT query on 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com   myquery: doing TXT query 
on 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com   myquery: 
10.spf1-test.mailzone.com TXT failed: NXDOMAIN.
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): TXT 
query on 10.spf1-test.mailzone.com returned error=, 
last_dns_error=NXDOMAIN
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): SPF 
policy:
# ||       postmaster 10.spf1-test.mailzone.com no SPF record found for 
10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com header_comment: spf_source 
= domain of 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com header_comment: 
spf_source_type = original-spf-record
t/00_all.t .. 13/223 # Test 13 got: "unknown" (t/00_all.t at line 127 fail 
#10)
#    Expected: "pass"
# Detailed debug log for test(s) 13:
# |         10.spf1-test.mailzone.com new: ipv4=192.0.2.10, 
sender=10.spf1-test.mailzone.com, helo=10.spf1-test.mailzone.com
# |        postmaster 10.spf1-test.mailzone.com localpart is postmaster
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): 
doing TXT query on 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com   myquery: doing TXT query 
on 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com   myquery: 
10.spf1-test.mailzone.com TXT failed: NXDOMAIN.
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): TXT 
query on 10.spf1-test.mailzone.com returned error=, 
last_dns_error=NXDOMAIN
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): SPF 
policy:
# ||       postmaster 10.spf1-test.mailzone.com no SPF record found for 
10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com header_comment: spf_source 
= domain of 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com header_comment: 
spf_source_type = original-spf-record
t/00_all.t .. 14/223 # Test 14 got: "unknown" (t/00_all.t at line 127 fail 
#11)
#    Expected: "pass"
# Detailed debug log for test(s) 14:
# |         10.spf1-test.mailzone.com new: ipv4=192.0.2.11, 
sender=10.spf1-test.mailzone.com, helo=10.spf1-test.mailzone.com
# |        postmaster 10.spf1-test.mailzone.com localpart is postmaster
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): 
doing TXT query on 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com   myquery: doing TXT query 
on 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com   myquery: 
10.spf1-test.mailzone.com TXT failed: NXDOMAIN.
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): TXT 
query on 10.spf1-test.mailzone.com returned error=, 
last_dns_error=NXDOMAIN
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): SPF 
policy:
# ||       postmaster 10.spf1-test.mailzone.com no SPF record found for 
10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com header_comment: spf_source 
= domain of 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com header_comment: 
spf_source_type = original-spf-record
t/00_all.t .. 15/223 # Test 15 got: "unknown" (t/00_all.t at line 127 fail 
#12)
#    Expected: "pass"
# Detailed debug log for test(s) 15:
# |         10.spf1-test.mailzone.com new: ipv4=192.0.2.12, 
sender=10.spf1-test.mailzone.com, helo=10.spf1-test.mailzone.com
# |        postmaster 10.spf1-test.mailzone.com localpart is postmaster
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): 
doing TXT query on 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com   myquery: doing TXT query 
on 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com   myquery: 
10.spf1-test.mailzone.com TXT failed: NXDOMAIN.
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): TXT 
query on 10.spf1-test.mailzone.com returned error=, 
last_dns_error=NXDOMAIN
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): SPF 
policy:
# ||       postmaster 10.spf1-test.mailzone.com no SPF record found for 
10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com header_comment: spf_source 
= domain of 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com header_comment: 
spf_source_type = original-spf-record
t/00_all.t .. 16/223 # Test 16 got: "unknown" (t/00_all.t at line 127 fail 
#13)
#    Expected: "pass"
# Detailed debug log for test(s) 16:
# |         10.spf1-test.mailzone.com new: ipv4=192.0.2.13, 
sender=10.spf1-test.mailzone.com, helo=10.spf1-test.mailzone.com
# |        postmaster 10.spf1-test.mailzone.com localpart is postmaster
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): 
doing TXT query on 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com   myquery: doing TXT query 
on 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com   myquery: 
10.spf1-test.mailzone.com TXT failed: NXDOMAIN.
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): TXT 
query on 10.spf1-test.mailzone.com returned error=, 
last_dns_error=NXDOMAIN
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): SPF 
policy:
# ||       postmaster 10.spf1-test.mailzone.com no SPF record found for 
10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com header_comment: spf_source 
= domain of 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com header_comment: 
spf_source_type = original-spf-record
t/00_all.t .. 17/223 # Test 17 got: "unknown" (t/00_all.t at line 127 fail 
#14)
#    Expected: "pass"
# Detailed debug log for test(s) 17:
# |         10.spf1-test.mailzone.com new: ipv4=192.0.2.20, 
sender=10.spf1-test.mailzone.com, helo=10.spf1-test.mailzone.com
# |        postmaster 10.spf1-test.mailzone.com localpart is postmaster
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): 
doing TXT query on 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com   myquery: doing TXT query 
on 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com   myquery: 
10.spf1-test.mailzone.com TXT failed: NXDOMAIN.
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): TXT 
query on 10.spf1-test.mailzone.com returned error=, 
last_dns_error=NXDOMAIN
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): SPF 
policy:
# ||       postmaster 10.spf1-test.mailzone.com no SPF record found for 
10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com header_comment: spf_source 
= domain of 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com header_comment: 
spf_source_type = original-spf-record
t/00_all.t .. 18/223 # Test 18 got: "unknown" (t/00_all.t at line 127 fail 
#15)
#    Expected: "pass"
# Detailed debug log for test(s) 18:
# |         10.spf1-test.mailzone.com new: ipv4=192.0.2.21, 
sender=10.spf1-test.mailzone.com, helo=10.spf1-test.mailzone.com
# |        postmaster 10.spf1-test.mailzone.com localpart is postmaster
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): 
doing TXT query on 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com   myquery: doing TXT query 
on 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com   myquery: 
10.spf1-test.mailzone.com TXT failed: NXDOMAIN.
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): TXT 
query on 10.spf1-test.mailzone.com returned error=, 
last_dns_error=NXDOMAIN
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): SPF 
policy:
# ||       postmaster 10.spf1-test.mailzone.com no SPF record found for 
10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com header_comment: spf_source 
= domain of 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com header_comment: 
spf_source_type = original-spf-record
t/00_all.t .. 19/223 # Test 19 got: "unknown" (t/00_all.t at line 127 fail 
#16)
#    Expected: "pass"
# Detailed debug log for test(s) 19:
# |         10.spf1-test.mailzone.com new: ipv4=192.0.2.22, 
sender=10.spf1-test.mailzone.com, helo=10.spf1-test.mailzone.com
# |        postmaster 10.spf1-test.mailzone.com localpart is postmaster
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): 
doing TXT query on 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com   myquery: doing TXT query 
on 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com   myquery: 
10.spf1-test.mailzone.com TXT failed: NXDOMAIN.
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): TXT 
query on 10.spf1-test.mailzone.com returned error=, 
last_dns_error=NXDOMAIN
# ||       postmaster 10.spf1-test.mailzone.com   DirectiveSet->new(): SPF 
policy:
# ||       postmaster 10.spf1-test.mailzone.com no SPF record found for 
10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com header_comment: spf_source 
= domain of 10.spf1-test.mailzone.com
# ||       postmaster 10.spf1-test.mailzone.com header_comment: 
spf_source_type = original-spf-record
^Cmake: *** [Makefile:853: test_dynamic] Interrupt
   JMEHNLE/mail-spf-query/Mail-SPF-Query-1.999.1.tar.gz
   /usr/bin/make test -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
   reports JMEHNLE/mail-spf-query/Mail-SPF-Query-1.999.1.tar.gz




On Fri, 11 Jun 2021, Mark Sapiro wrote:

> On 6/11/21 8:36 AM, Remco Barendse wrote:
>>
>>  When running the installer, it just hangs here :
>>
>>
>>  Mail::SPF::Query is missing. Installing via CPAN ...
>>
>>  --> Working on Mail::SPF::Query
>>  Fetching
>>  http://www.cpan.org/authors/id/J/JM/JMEHNLE/mail-spf-query/Mail-SPF-Query-1.999.1.tar.gz
>>  ... OK
>>  Configuring Mail-SPF-Query-1.999.1 ... OK
>>  Building and testing Mail-SPF-Query-1.999.1 ... ! Timed out (> 1800s). Use
>>  --verbose to retry.
>>  Terminated
>>
>>  Any hints?
>
> What happens if you manually run
>
> cpan install Mail::SPF::Query
>
> -- 
> Mark Sapiro <[email protected]>        The highway is for gamblers,
> San Francisco Bay Area, California    better use your sense - B. Dylan
>
>
> -- 
> MailScanner mailing list
> mailscanner-qhrM8SXbD5JTOyd/[email protected]
> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>
>
> -- 
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



-- 
MailScanner mailing list
mailscanner-qhrM8SXbD5JTOyd/[email protected]
http://lists.mailscanner.info/mailman/listinfo/mailscanner