Re: [SPAM] Re: Lost....

Make sure that both the MIDI Out of the K5 is going into your computer's MIDI In __AND__ the MIDI Out of the computer is going into the MIDI In of the K5.  Whith some synths, all you need to do is hook the MIDI Out of the syth into the MIDI In of the computer.  The K5 is not like this.  The SysEx transfer requires a two-way communication so both the MIDI in and MIDI Out need to be correctly connected.

I don't know if that's what's going wrong but I thought I'd mention it.

Jeff


----- Original Message ----
From: Scott <[email protected]>
To: [email protected]
Sent: Saturday, June 2, 2007 1:58:02 PM
Subject: Re: [SPAM] Re: [k5synth] Lost....

Thanks for the quick reply. I've done all of those things and rechecked my midi connector's settings on the computer to make usre they are correct. I have no problems doing sys ex dumps with my other synths but this one puzzles me. It's not consistently sending dumps out of the K-5 via sys ex either. I've tried using the Kfleuf program and have also had no luck with it, it's probably something stupid on my part that I'm just not catching but I've worked with this all day and still no luck.
Thanks,Scott
----- Original Message ----- 
From: Antoine Deschênes 
To: k5synth@yahoogroups .com 
Sent: Saturday, June 02, 2007 3:32 PM
Subject: [SPAM] Re: [k5synth] Lost....


In the MIDI menu on the K5, make sure that RCV and TRS channels are set 
to 1, that OMNI is off, that TRS and RCV Exclusive are on, and that you 
turned off the protect switch next to the MIDI connectors. Also, make 
sure you turn protect ON when you don't transfer or edit sounds as you 
might have to internally reset it. (I haven't tested the latest ROM 
enough to know if it changes something. But, as far as I know, nothing 
bad happened with the new ROM.)

bjork011963 a écrit :
> I got my K-5 yesterday and was trying to load some programs into it 
> using a couple of sys ex utilities that I have including the one 
> offered on here in the files section. I use a usb midi connector to go 
> from my computer to the K-5 as I do with my other synths but cannot get 
> the K-5 to accept any programs. I connected the K-5 to one of my other 
> synts to make sure that the midi in was working and it is, the system 
> exclusive part is also turned on on the program. Any ideas as to what 
> I'm doing wrong? Thanks,Scott
> 




No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.472 / Virus Database: 269.8.6/828 - Release Date: 6/1/2007 11:22 AM




       
____________________________________________________________________________________
Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more. 
http://mobile.yahoo.com/go?refer=1GNXIC