Re: [SPAM] Re: Lost....

Other things you could look at :
-When you press MIDI twice, there's an other menu, make sure PGM is on.
-When you're trying to write to a DC-32 memory card, the memory 
protection switch is set by pressing System twice.

Summary of synth's own config : (Do it before you start the software, 
some options will turn off again if the synth is turned off.)

First MIDI config page:
Channel :
RCV=1 TRS=1 OMNI=OFF
Exclusive :
RCV=ON TRS=ON

PGM=SINGLE

Second MIDI config page:
Transmit and Receive:
PGM=ON

Write to internal memory:
Physical Protect switch set to Off.

Write to external memory:
2nd System config page :
Protect=Off


If that doesn't work, you might want to try another MIDI interface. 
(joystick port ones for example)
If it works, then you will either need a new ROM or another interface.

Scott a écrit :
> Thanks for the quick reply. I've done all of those things and 
> rechecked my midi connector's settings on the computer to make usre 
> they are correct. I have no problems doing sys ex dumps with my other 
> synths but this one puzzles me. It's not consistently sending dumps 
> out of the K-5 via sys ex either. I've tried using the Kfleuf program 
> and have also had no luck with it, it's probably something stupid on 
> my part that I'm just not catching but I've worked with this all day 
> and still no luck.
> Thanks,Scott
>
>     ----- Original Message -----
>     *From:* Antoine Deschênes <mailto:antdes45-FFYn/[email protected]>
>     *To:* [email protected] <mailto:[email protected]>
>     *Sent:* Saturday, June 02, 2007 3:32 PM
>     *Subject:* [SPAM] Re: [k5synth] Lost....
>
>     In the MIDI menu on the K5, make sure that RCV and TRS channels
>     are set
>     to 1, that OMNI is off, that TRS and RCV Exclusive are on, and
>     that you
>     turned off the protect switch next to the MIDI connectors. Also, make
>     sure you turn protect ON when you don't transfer or edit sounds as
>     you
>     might have to internally reset it. (I haven't tested the latest ROM
>     enough to know if it changes something. But, as far as I know,
>     nothing
>     bad happened with the new ROM.)
>
>     bjork011963 a écrit :
>     > I got my K-5 yesterday and was trying to load some programs into it
>     > using a couple of sys ex utilities that I have including the one
>     > offered on here in the files section. I use a usb midi connector
>     to go
>     > from my computer to the K-5 as I do with my other synths but
>     cannot get
>     > the K-5 to accept any programs. I connected the K-5 to one of my
>     other
>     > synts to make sure that the midi in was working and it is, the
>     system
>     > exclusive part is also turned on on the program. Any ideas as to
>     what
>     > I'm doing wrong? Thanks,Scott
>