Re: Re: K5 ROMs

Hody,

 Thanx for the tip. Yes indeed, I had to do that on a
couple of them. Now for the next round of chips.
Rig


--- Antoine Deschênes <antdes45-FFYn/[email protected]> wrote:

> Well, you certainly know stuff, but you don't have
> an other K5 to compare
> with yours.
> 
> I hope you didn't damage any traces... lots of via
> holes are hidden under
> components in there, and the service manual doesn't
> have the PCB layout in
> it. Point-to-point is an option as you stated. Just
> in case, I use an other
> method which could save you time. You can scrape the
> solder mask layer on a
> PCB trace with a miniature flat-bladed screwdriver
> next to the solder pad,
> then you use a small gauge wire (I use CAT5) to
> connect the component pin
> back to the trace.
> 
> 
> 
> 
> 2007/7/27, bill bigrig <billbigrig-/[email protected]>:
> >
> > Howdy,
> >
> > That's a good idea as I know nothing about
> > electronics except building countless kits,
> automating
> > mill machines and repairing/modifying (all but 1
> of my
> > music equipment). Also LOTS of circuit bending,
> the
> > day I replaced the chips,i was exhausted, shaky,
> and
> > being interupted constantly by my girlfriend.
> Thus,
> > the second attempt.
> > The offer IS appreciated and I may take you up
> onit.
> > THANX!
> > Rig
> >
> >
> > --- Antoine Deschênes <antdes45-FFYn/[email protected]> wrote:
> >
> > > Thanks for confirming! You wanted one before you
> got
> > > it.
> > >
> > > I wonder if you should send the synth to anyone
> of
> > > us that knows something
> > > about electronics. We could at least test your
> synth
> > > with a different
> > > encoder wheels and things like that.
> > >
> > > Your post about your synth not displaying
> anything
> > > anymore showed up as
> > > spam... I just went on the yahoo Groups page and
> saw
> > > this. That's strange
> > > that moderators get no notice that there are
> > > possible spams coming in the
> > > group.
> > >
> > > 2007/7/26, bill bigrig <billbigrig-/[email protected]>:
> > > >
> > > > Howdy,
> > > >
> > > > Yep, I should get a 1.3 also, just in case I
> get
> > > this
> > > > thing up and running.
> > > > rig
> > > >
> > > >
> > > > --- gdarceyclmg <gdarcey-yBeKhBN/[email protected]> wrote:
> > > >
> > > > > I'd be interrested in the 1.3 ROMS. Does
> anyone
> > > know
> > > > > if it's a major thing or something
> > > > > minor. I currently have 1.2
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > --- In [email protected], Antoine
> > > Deschênes
> > > > > <antdes45@...> wrote:
> > > > > >
> > > > > > Hi guys,
> > > > > >
> > > > > > I will not buy the ROMs until two weeks,
> I'm
> > > not
> > > > > going to be there to
> > > > > > get them programmed.
> > > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> >
> >
>
____________________________________________________________________________________
> > > > Park yourself in front of a world of choices
> in
> > > alternative vehicles.
> > > > Visit the Yahoo! Auto Green Center.
> > > > http://autos.yahoo.com/green_center/
> > > >
> > > >
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > > --
> > > Antoine Deschênes
> > >
> >
> >
> >
> >
> >
> >
>
____________________________________________________________________________________
> > Be a better Heartthrob. Get better relationship
> answers from someone who
> > knows. Yahoo! Answers - Check it out.
> >
>
http://answers.yahoo.com/dir/?link=list&sid=396545433
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> 
> 
> -- 
> Antoine Deschênes
> 



       
____________________________________________________________________________________
Sick sense of humor? Visit Yahoo! TV's 
Comedy with an Edge to see what's on, when. 
http://tv.yahoo.com/collections/222