Re: LCD-Inverter Pinlayout

Hi Malte,

It's quite easy to follow the traces under the PSU PCB to find what goes where.

-The short trace between the backlight connector and the inverter is the output.
-The other trace going to the backlight connector, one of the inverter
pins and other places on the board is the ground.
-The trace that connects to the inverter but not the backlight is the input.

I'll try to find time to take a picture if you need one.

Hope this helps,
Antoine

2007/11/25, Malte Krug <[email protected]>:
> Hi,
>
> I got a question about the LCD-Inverter. The one in my K5m seems to be
> broken and I got a new one from midirakete.de. But due to the fact that
> the replecementpart isn't the same size and pins are located differently,
> I just want to make sure, I won't burn up something.
>
> The replacement is marked properly, but I don't got a servicemanual to
> check out the proper installation, which pin goes where.
>
> Can anybody provide this info?
>
> Thanx in advance,
> Malte
>
>
>
> Yahoo! Groups Links
>
>
>
>


-- 
Antoine Deschênes