Re: K2600RS Blue Screen but power and clock crystals good

"danforcz [email protected] [KurzList]" <[email protected]>
Newsgroups gmane.music.equipment.kurzweil
Message-ID <[email protected]>
Usual source of problems :-)

I replaced PSU caps in all my machines older than 20 years…

Daniel Forro


> On Oct 18, 2018, at 10:24, 'Mark & Mary Ann Weiss' [email protected] [KurzList] <[email protected]> wrote:
> 
> 
> During additional testing, I discovered the Power_Good line was pulsing negative at 120 Hz. I traced back the sample to a unregulated DC rectifier. Pulling that line high caused the K2600 to boot up.
> I think it's dried out capacitors. So I'm replacing all capacitors in the power supply. The large one, 33,000uF, is reading 21,000 on a GenRad Digi-bridge.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.