Re: Special use for the SLIMP3

Sean Adams <sadams-C+JAmueIyFXt/WbtSZLAmwC/[email protected]> Wed, 2 Jan 2002 05:22:55 +0000 (GMT)
Newsgroups gmane.music.equipment.slimp3.user
Message-ID <[email protected]>
> I'd like to use the SLIMP3 with a Pentium 75 laptop for use in an
> RV.  (...to be semi portable between the RV and a real house ;) )
> The RV has regular household outlets, etc.  There's a mini-stereo in
> there that sounds quite pleasant in an RV - just doesn't have room to
> hold a few hundred CD's ;) .

That's a great application! If you send me photos, I'll post them on the
web site.

> Assuming the laptop is configured to immediately boot up the SLIMP3
> server, etc, how does the SLIMP3 "receiver" respond to being powered
> off and then powered back on (once it has already been configured)?
> If the laptop takes 50 seconds to boot up, what happens if the SLIMP3
> turns on first, does it wait and "listen" for the SLIMP3 server ?

The SliMP3 takes about half a second to boot from a cold power-on. Then
there's a splash screen which shows for 5 seconds, and then a menu which
asks if you want to change the network settings.

After that, it usually takes about 1 second to do a DHCP lookup (if you're
using DHCP) and another second to find the SliMP3 server (if you're using
Slim Discovery Protocol). Then it's ready to go.

If the server isn't available when the SliMP3 starts, it's not a problem.
The player's display will say "Looking for SliMP3 server", and will keep
retrying ever 2 seconds until the server is ready.

> Also, if I place this in Random Mode, to which point does it always
> return to, if it ever gets powered off ?  Will I need to always press
> the Random key - or is there a "memory" that starts it right up in
> Random mode next time ?

By "it", do you mean the server or the client? The client is pretty much
stateless. You can reboot it and it will come right back to where you left
off (except the current stream will not resume until you press play).
If you reboot the server you lose state. However, if you're using a
laptop, you could probably use its sleep feature instead of rebooting, no?

> Also..I've seen the pictures, but what are the actual dimensions of
> the SLIMP3 "receiver" ?

It's 2.1" tall (2.25" with the rubber feet), 1.9" deep, and 8.25" wide.

Sean


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Need new boots for winter? Looking for a perfect gift for your shoe loving friends?
Zappos.com is the perfect fit for all your shoe needs!
http://us.click.yahoo.com/ltdUpD/QrSDAA/ySSFAA/rIp0lB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
[email protected]

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/