Re: Draytek Vigor 2710vn - ADSL Stats

what the result if you snmpwalk through that OID ?

Regards,
Huda
blog.mhdland.net



On Wed, Apr 4, 2012 at 4:09 PM,  <[email protected]> wrote:
> Hello,
>
> First of all, Cacti looks great, and I am eager to learn more, but I am
> new, so excuse the terminology if not quite correct.
>
> I have added several devices, one of which I am having trouble with. It is
> a Draytek 2710vn ADSL router.
>
> The Draytek Device shows us status Up with a correct hostname (IP). It
> however is listed with only 1 data source. The Draytek device is listed as
> a Generic SNMP host.
>
> The Draytek supports:
>
>
> Vigor Routers support MIB II. Please download the standard MIB II and
> ADSL-LINE-MIB.
>
> The items below are the ADSL-LINE-MIB that Vigor Routers support.
>
> OID for supported ADSL LINE MIB
>
> ----------------------------------------------------------
>
> 1.3.6.1.2.1.10.94.1.1.1.1.1 adslLineCoding
> 1.3.6.1.2.1.10.94.1.1.1.1.2 adslLineType
> 1.3.6.1.2.1.10.94.1.1.1.1.3 adslLineSpecific
> 1.3.6.1.2.1.10.94.1.1.1.1.4 adslLineConfProfile
> 1.3.6.1.2.1.10.94.1.1.1.1.5 adslLineAlarmConfProfile
>
> 1.3.6.1.2.1.10.94.1.1.3.1.1 adslAturInvSerialNumber
> 1.3.6.1.2.1.10.94.1.1.3.1.2 adslAturInvVendorID
> 1.3.6.1.2.1.10.94.1.1.3.1.3 adslAturInvVersionNumber
> 1.3.6.1.2.1.10.94.1.1.3.1.4 adslAturCurrSnrMgn
> 1.3.6.1.2.1.10.94.1.1.3.1.5 adslAturCurrAtn
> 1.3.6.1.2.1.10.94.1.1.3.1.6 adslAturCurrStatus
> 1.3.6.1.2.1.10.94.1.1.3.1.7 adslAturCurrOutputPwr
> 1.3.6.1.2.1.10.94.1.1.3.1.8 adslAturCurrAttainableRate
>
> 1.3.6.1.2.1.10.94.1.1.5.1.1 adslAturChanInterleaveDelay
> 1.3.6.1.2.1.10.94.1.1.5.1.2 adslAturChanCurrTxRate
> 1.3.6.1.2.1.10.94.1.1.5.1.3 adslAturChanPrevTxRate
> 1.3.6.1.2.1.10.94.1.1.5.1.4 adslAturChanCrcBlockLength
>
>
> I tried adding a 'one off' OID via 'Create Graph' and 'SNMP Generic OID
> Template' then specifying, for example the adslAturCurrSnrMgn with
> 1.3.6.1.2.1.10.94.1.1.3.1.4 - and I added a leading "." to the OID number
> but it didnt work.
>
> The graph shows up but there is no data. Poller is set to 1 min and I
> waited several!
>
> Data Source Debug
>
> /usr/bin/rrdtool create \
> /var/lib/cacti/rra/draytek_gateway_snmp_oid_50.rrd \
> --step 300 \
> DS:snmp_oid:GAUGE:600:0:100 \
> RRA:AVERAGE:0.5:1:600 \
> RRA:AVERAGE:0.5:6:700 \
> RRA:AVERAGE:0.5:24:775 \
> RRA:AVERAGE:0.5:288:797 \
> RRA:MAX:0.5:1:600 \
> RRA:MAX:0.5:6:700 \
> RRA:MAX:0.5:24:775 \
> RRA:MAX:0.5:288:797 \
>
> Graph Debug:
>
> RRDTool Command:
>
> /usr/bin/rrdtool graph - \
> --imgformat=PNG \
> --start=-86400 \
> --end=-300 \
> --title='Draytek Gateway - SNR Margin' \
> --base=1000 \
> --height=120 \
> --width=500 \
> --alt-autoscale-max \
> --lower-limit=0 \
> --vertical-label='' \
> --slope-mode \
> --font TITLE:12: \
> --font AXIS:8: \
> --font LEGEND:10: \
> --font UNIT:8: \
> DEF:a="/var/lib/cacti/rra/draytek_gateway_snmp_oid_50.rrd":snmp_oid:AVERAGE
> \
> AREA:a#F5F800FF:"" \
> GPRINT:a:LAST:"Current\:%8.2lf %s" \
> GPRINT:a:AVERAGE:"Average\:%8.2lf %s" \
> GPRINT:a:MAX:"Maximum\:%8.2lf %s\n"
>
> RRDTool Says:
>
> OK
>
> Any help on this would be gratefully received, and I have now discovered
> since I have bene fiddling that all my graphs for all devices have stopped.
> SOB!
>
> Thanks in advance,
>
> -Al
> ------------------------------------------------------------------------------
> Better than sec? Nothing is better than sec when it comes to
> monitoring Big Data applications. Try Boundary one-second
> resolution app monitoring today. Free.
> http://p.sf.net/sfu/Boundary-dev2dev
> _______________________________________________
> cacti-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/cacti-user

------------------------------------------------------------------------------
Better than sec? Nothing is better than sec when it comes to
monitoring Big Data applications. Try Boundary one-second 
resolution app monitoring today. Free.
http://p.sf.net/sfu/Boundary-dev2dev