Re: Draytek Vigor 2710vn - ADSL Stats

Hi Huda,

Sorry I am not sure how to do that. I took a quick look at the man page and
it didnt fully make sense to me.

WHat command should I type?

Cheers

-Al



On Thu, Apr 5, 2012 at 1:49 AM, Huda <[email protected]> wrote:

> what the result if you snmpwalk through that OID ?
>
> Regards,
> Huda
> blog.mhdland.net
>
>
>
> On Wed, Apr 4, 2012 at 4:09 PM,  <[email protected]> wrote:
> > Hello,
> >
> > First of all, Cacti looks great, and I am eager to learn more, but I am
> > new, so excuse the terminology if not quite correct.
> >
> > I have added several devices, one of which I am having trouble with. It
> is
> > a Draytek 2710vn ADSL router.
> >
> > The Draytek Device shows us status Up with a correct hostname (IP). It
> > however is listed with only 1 data source. The Draytek device is listed
> as
> > a Generic SNMP host.
> >
> > The Draytek supports:
> >
> >
> > Vigor Routers support MIB II. Please download the standard MIB II and
> > ADSL-LINE-MIB.
> >
> > The items below are the ADSL-LINE-MIB that Vigor Routers support.
> >
> > OID for supported ADSL LINE MIB
> >
> > ----------------------------------------------------------
> >
> > 1.3.6.1.2.1.10.94.1.1.1.1.1 adslLineCoding
> > 1.3.6.1.2.1.10.94.1.1.1.1.2 adslLineType
> > 1.3.6.1.2.1.10.94.1.1.1.1.3 adslLineSpecific
> > 1.3.6.1.2.1.10.94.1.1.1.1.4 adslLineConfProfile
> > 1.3.6.1.2.1.10.94.1.1.1.1.5 adslLineAlarmConfProfile
> >
> > 1.3.6.1.2.1.10.94.1.1.3.1.1 adslAturInvSerialNumber
> > 1.3.6.1.2.1.10.94.1.1.3.1.2 adslAturInvVendorID
> > 1.3.6.1.2.1.10.94.1.1.3.1.3 adslAturInvVersionNumber
> > 1.3.6.1.2.1.10.94.1.1.3.1.4 adslAturCurrSnrMgn
> > 1.3.6.1.2.1.10.94.1.1.3.1.5 adslAturCurrAtn
> > 1.3.6.1.2.1.10.94.1.1.3.1.6 adslAturCurrStatus
> > 1.3.6.1.2.1.10.94.1.1.3.1.7 adslAturCurrOutputPwr
> > 1.3.6.1.2.1.10.94.1.1.3.1.8 adslAturCurrAttainableRate
> >
> > 1.3.6.1.2.1.10.94.1.1.5.1.1 adslAturChanInterleaveDelay
> > 1.3.6.1.2.1.10.94.1.1.5.1.2 adslAturChanCurrTxRate
> > 1.3.6.1.2.1.10.94.1.1.5.1.3 adslAturChanPrevTxRate
> > 1.3.6.1.2.1.10.94.1.1.5.1.4 adslAturChanCrcBlockLength
> >
> >
> > I tried adding a 'one off' OID via 'Create Graph' and 'SNMP Generic OID
> > Template' then specifying, for example the adslAturCurrSnrMgn with
> > 1.3.6.1.2.1.10.94.1.1.3.1.4 - and I added a leading "." to the OID number
> > but it didnt work.
> >
> > The graph shows up but there is no data. Poller is set to 1 min and I
> > waited several!
> >
> > Data Source Debug
> >
> > /usr/bin/rrdtool create \
> > /var/lib/cacti/rra/draytek_gateway_snmp_oid_50.rrd \
> > --step 300 \
> > DS:snmp_oid:GAUGE:600:0:100 \
> > RRA:AVERAGE:0.5:1:600 \
> > RRA:AVERAGE:0.5:6:700 \
> > RRA:AVERAGE:0.5:24:775 \
> > RRA:AVERAGE:0.5:288:797 \
> > RRA:MAX:0.5:1:600 \
> > RRA:MAX:0.5:6:700 \
> > RRA:MAX:0.5:24:775 \
> > RRA:MAX:0.5:288:797 \
> >
> > Graph Debug:
> >
> > RRDTool Command:
> >
> > /usr/bin/rrdtool graph - \
> > --imgformat=PNG \
> > --start=-86400 \
> > --end=-300 \
> > --title='Draytek Gateway - SNR Margin' \
> > --base=1000 \
> > --height=120 \
> > --width=500 \
> > --alt-autoscale-max \
> > --lower-limit=0 \
> > --vertical-label='' \
> > --slope-mode \
> > --font TITLE:12: \
> > --font AXIS:8: \
> > --font LEGEND:10: \
> > --font UNIT:8: \
> >
> DEF:a="/var/lib/cacti/rra/draytek_gateway_snmp_oid_50.rrd":snmp_oid:AVERAGE
> > \
> > AREA:a#F5F800FF:"" \
> > GPRINT:a:LAST:"Current\:%8.2lf %s" \
> > GPRINT:a:AVERAGE:"Average\:%8.2lf %s" \
> > GPRINT:a:MAX:"Maximum\:%8.2lf %s\n"
> >
> > RRDTool Says:
> >
> > OK
> >
> > Any help on this would be gratefully received, and I have now discovered
> > since I have bene fiddling that all my graphs for all devices have
> stopped.
> > SOB!
> >
> > Thanks in advance,
> >
> > -Al
> >
> ------------------------------------------------------------------------------
> > Better than sec? Nothing is better than sec when it comes to
> > monitoring Big Data applications. Try Boundary one-second
> > resolution app monitoring today. Free.
> > http://p.sf.net/sfu/Boundary-dev2dev
> > _______________________________________________
> > cacti-user mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/cacti-user
>
>
> ------------------------------------------------------------------------------
> Better than sec? Nothing is better than sec when it comes to
> monitoring Big Data applications. Try Boundary one-second
> resolution app monitoring today. Free.
> http://p.sf.net/sfu/Boundary-dev2dev
> _______________________________________________
> cacti-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/cacti-user
>



-- 
"Beat it punk!"
- Clint Eastwood
------------------------------------------------------------------------------
Better than sec? Nothing is better than sec when it comes to
monitoring Big Data applications. Try Boundary one-second 
resolution app monitoring today. Free.
http://p.sf.net/sfu/Boundary-dev2dev