Re: Draytek Vigor 2710vn - ADSL Stats

first of all what system do you use ? Windows or Linux ?

Because i'm not sure if in Windows ... i usually work in Linux

Regards,
Huda


On Wed, Apr 4, 2012 at 11:17 PM, Al Grant <[email protected]> wrote:
> Hi Huda,
>
> Sorry I am not sure how to do that. I took a quick look at the man page and
> it didnt fully make sense to me.
>
> WHat command should I type?
>
> Cheers
>
> -Al
>
>
>
> On Thu, Apr 5, 2012 at 1:49 AM, Huda <[email protected]> wrote:
>
>> what the result if you snmpwalk through that OID ?
>>
>> Regards,
>> Huda
>> blog.mhdland.net
>>
>>
>>
>> On Wed, Apr 4, 2012 at 4:09 PM,  <[email protected]> wrote:
>> > Hello,
>> >
>> > First of all, Cacti looks great, and I am eager to learn more, but I am
>> > new, so excuse the terminology if not quite correct.
>> >
>> > I have added several devices, one of which I am having trouble with. It
>> is
>> > a Draytek 2710vn ADSL router.
>> >
>> > The Draytek Device shows us status Up with a correct hostname (IP). It
>> > however is listed with only 1 data source. The Draytek device is listed
>> as
>> > a Generic SNMP host.
>> >
>> > The Draytek supports:
>> >
>> >
>> > Vigor Routers support MIB II. Please download the standard MIB II and
>> > ADSL-LINE-MIB.
>> >
>> > The items below are the ADSL-LINE-MIB that Vigor Routers support.
>> >
>> > OID for supported ADSL LINE MIB
>> >
>> > ----------------------------------------------------------
>> >
>> > 1.3.6.1.2.1.10.94.1.1.1.1.1 adslLineCoding
>> > 1.3.6.1.2.1.10.94.1.1.1.1.2 adslLineType
>> > 1.3.6.1.2.1.10.94.1.1.1.1.3 adslLineSpecific
>> > 1.3.6.1.2.1.10.94.1.1.1.1.4 adslLineConfProfile
>> > 1.3.6.1.2.1.10.94.1.1.1.1.5 adslLineAlarmConfProfile
>> >
>> > 1.3.6.1.2.1.10.94.1.1.3.1.1 adslAturInvSerialNumber
>> > 1.3.6.1.2.1.10.94.1.1.3.1.2 adslAturInvVendorID
>> > 1.3.6.1.2.1.10.94.1.1.3.1.3 adslAturInvVersionNumber
>> > 1.3.6.1.2.1.10.94.1.1.3.1.4 adslAturCurrSnrMgn
>> > 1.3.6.1.2.1.10.94.1.1.3.1.5 adslAturCurrAtn
>> > 1.3.6.1.2.1.10.94.1.1.3.1.6 adslAturCurrStatus
>> > 1.3.6.1.2.1.10.94.1.1.3.1.7 adslAturCurrOutputPwr
>> > 1.3.6.1.2.1.10.94.1.1.3.1.8 adslAturCurrAttainableRate
>> >
>> > 1.3.6.1.2.1.10.94.1.1.5.1.1 adslAturChanInterleaveDelay
>> > 1.3.6.1.2.1.10.94.1.1.5.1.2 adslAturChanCurrTxRate
>> > 1.3.6.1.2.1.10.94.1.1.5.1.3 adslAturChanPrevTxRate
>> > 1.3.6.1.2.1.10.94.1.1.5.1.4 adslAturChanCrcBlockLength
>> >
>> >
>> > I tried adding a 'one off' OID via 'Create Graph' and 'SNMP Generic OID
>> > Template' then specifying, for example the adslAturCurrSnrMgn with
>> > 1.3.6.1.2.1.10.94.1.1.3.1.4 - and I added a leading "." to the OID number
>> > but it didnt work.
>> >
>> > The graph shows up but there is no data. Poller is set to 1 min and I
>> > waited several!
>> >
>> > Data Source Debug
>> >
>> > /usr/bin/rrdtool create \
>> > /var/lib/cacti/rra/draytek_gateway_snmp_oid_50.rrd \
>> > --step 300 \
>> > DS:snmp_oid:GAUGE:600:0:100 \
>> > RRA:AVERAGE:0.5:1:600 \
>> > RRA:AVERAGE:0.5:6:700 \
>> > RRA:AVERAGE:0.5:24:775 \
>> > RRA:AVERAGE:0.5:288:797 \
>> > RRA:MAX:0.5:1:600 \
>> > RRA:MAX:0.5:6:700 \
>> > RRA:MAX:0.5:24:775 \
>> > RRA:MAX:0.5:288:797 \
>> >
>> > Graph Debug:
>> >
>> > RRDTool Command:
>> >
>> > /usr/bin/rrdtool graph - \
>> > --imgformat=PNG \
>> > --start=-86400 \
>> > --end=-300 \
>> > --title='Draytek Gateway - SNR Margin' \
>> > --base=1000 \
>> > --height=120 \
>> > --width=500 \
>> > --alt-autoscale-max \
>> > --lower-limit=0 \
>> > --vertical-label='' \
>> > --slope-mode \
>> > --font TITLE:12: \
>> > --font AXIS:8: \
>> > --font LEGEND:10: \
>> > --font UNIT:8: \
>> >
>> DEF:a="/var/lib/cacti/rra/draytek_gateway_snmp_oid_50.rrd":snmp_oid:AVERAGE
>> > \
>> > AREA:a#F5F800FF:"" \
>> > GPRINT:a:LAST:"Current\:%8.2lf %s" \
>> > GPRINT:a:AVERAGE:"Average\:%8.2lf %s" \
>> > GPRINT:a:MAX:"Maximum\:%8.2lf %s\n"
>> >
>> > RRDTool Says:
>> >
>> > OK
>> >
>> > Any help on this would be gratefully received, and I have now discovered
>> > since I have bene fiddling that all my graphs for all devices have
>> stopped.
>> > SOB!
>> >
>> > Thanks in advance,
>> >
>> > -Al
>> >
>> ------------------------------------------------------------------------------
>> > Better than sec? Nothing is better than sec when it comes to
>> > monitoring Big Data applications. Try Boundary one-second
>> > resolution app monitoring today. Free.
>> > http://p.sf.net/sfu/Boundary-dev2dev
>> > _______________________________________________
>> > cacti-user mailing list
>> > [email protected]
>> > https://lists.sourceforge.net/lists/listinfo/cacti-user
>>
>>
>> ------------------------------------------------------------------------------
>> Better than sec? Nothing is better than sec when it comes to
>> monitoring Big Data applications. Try Boundary one-second
>> resolution app monitoring today. Free.
>> http://p.sf.net/sfu/Boundary-dev2dev
>> _______________________________________________
>> cacti-user mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/cacti-user
>>
>
>
>
> --
> "Beat it punk!"
> - Clint Eastwood
> ------------------------------------------------------------------------------
> Better than sec? Nothing is better than sec when it comes to
> monitoring Big Data applications. Try Boundary one-second
> resolution app monitoring today. Free.
> http://p.sf.net/sfu/Boundary-dev2dev
> _______________________________________________
> cacti-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/cacti-user

------------------------------------------------------------------------------
Better than sec? Nothing is better than sec when it comes to
monitoring Big Data applications. Try Boundary one-second 
resolution app monitoring today. Free.
http://p.sf.net/sfu/Boundary-dev2dev