Zhone/Paradyne Bitstorm 2600 [long]

Hi,

I have got a few DSLAMs as in topic, unfortunately 'standard'* way of
Cacti's interface traffic graph adding doesn't work (graph/data source is 
created, but nothing is graphed) - it seems to have each component of the
xDSL interface 

* standard way : click on 'Create graphs for this host' and mass-creation of
'Interface Traffic' type graphs.

$ snmpwalk -v 2c -c public host:port > paradynewalk.txt dumps quite a lot of data

where I can see some patterns,
e.g.

iso.3.6.1.2.1.2.2.1.1.1001001 = INTEGER: 1001001
iso.3.6.1.2.1.2.2.1.1.1001002 = INTEGER: 1001002
iso.3.6.1.2.1.2.2.1.1.1001003 = INTEGER: 1001003
...
iso.3.6.1.2.1.2.2.1.1.1001201 = INTEGER: 1001201
iso.3.6.1.2.1.2.2.1.1.1001202 = INTEGER: 1001202
iso.3.6.1.2.1.2.2.1.1.1001203 = INTEGER: 1001203
...
iso.3.6.1.2.1.2.2.1.1.1003001 = INTEGER: 1003001
iso.3.6.1.2.1.2.2.1.1.1003002 = INTEGER: 1003002
iso.3.6.1.2.1.2.2.1.1.1003003 = INTEGER: 1003003
...
iso.3.6.1.2.1.2.2.1.2.1001001 = STRING: "DSL PORT 1"
iso.3.6.1.2.1.2.2.1.2.1001002 = STRING: "DSL PORT 2"
iso.3.6.1.2.1.2.2.1.2.1001003 = STRING: "DSL PORT 3"
...
iso.3.6.1.2.1.2.2.1.2.1001101 = STRING: "CONSOLE PORT"
iso.3.6.1.2.1.2.2.1.2.1001201 = STRING: "ETHERNET PORT 1"
iso.3.6.1.2.1.2.2.1.2.1001202 = STRING: "ETHERNET PORT 2"
iso.3.6.1.2.1.2.2.1.2.1001203 = STRING: "ETHERNET PORT 3"
iso.3.6.1.2.1.2.2.1.2.1001301 = STRING: "Management In-Band Ethernet Interface "
iso.3.6.1.2.1.2.2.1.2.1001302 = STRING: "Management Out-of-Band Ethernet Interface"
iso.3.6.1.2.1.2.2.1.2.1002001 = STRING: "DSL ATM Interface 1"
iso.3.6.1.2.1.2.2.1.2.1002002 = STRING: "DSL ATM Interface 2"
iso.3.6.1.2.1.2.2.1.2.1002003 = STRING: "DSL ATM Interface 3"
...
iso.3.6.1.2.1.2.2.1.2.1003001 = STRING: "DSL Ethernet Interface 1 "
iso.3.6.1.2.1.2.2.1.2.1003002 = STRING: "DSL Ethernet Interface 2 "
iso.3.6.1.2.1.2.2.1.2.1003003 = STRING: "DSL Ethernet Interface 3 "
...
iso.3.6.1.2.1.2.2.1.3.1001201 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.1001202 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.1001203 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.1001301 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.1001302 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.1002001 = INTEGER: 149
iso.3.6.1.2.1.2.2.1.3.1002002 = INTEGER: 149
iso.3.6.1.2.1.2.2.1.3.1002003 = INTEGER: 149
...
iso.3.6.1.2.1.2.2.1.4.1001001 = INTEGER: 53
iso.3.6.1.2.1.2.2.1.4.1001002 = INTEGER: 53
iso.3.6.1.2.1.2.2.1.4.1001003 = INTEGER: 53
...
iso.3.6.1.2.1.2.2.1.4.1001101 = INTEGER: 0
iso.3.6.1.2.1.2.2.1.4.1001201 = INTEGER: 1550
iso.3.6.1.2.1.2.2.1.4.1001202 = INTEGER: 1550
iso.3.6.1.2.1.2.2.1.4.1001203 = INTEGER: 1550
iso.3.6.1.2.1.2.2.1.4.1001301 = INTEGER: 1550
iso.3.6.1.2.1.2.2.1.4.1001302 = INTEGER: 1550
iso.3.6.1.2.1.2.2.1.4.1002001 = INTEGER: 53
iso.3.6.1.2.1.2.2.1.4.1002002 = INTEGER: 53
iso.3.6.1.2.1.2.2.1.4.1002003 = INTEGER: 53
...
iso.3.6.1.2.1.2.2.1.4.1003001 = INTEGER: 1550
iso.3.6.1.2.1.2.2.1.4.1003002 = INTEGER: 1550
iso.3.6.1.2.1.2.2.1.4.1003003 = INTEGER: 1550
...
iso.3.6.1.2.1.2.2.1.5.1001001 = Gauge32: 0
iso.3.6.1.2.1.2.2.1.5.1001002 = Gauge32: 0
iso.3.6.1.2.1.2.2.1.5.1001003 = Gauge32: 0
[ these may be the gauges we're looking for, I see others below have values:
iso.3.6.1.2.1.2.2.1.5.1001013 = Gauge32: 22079000
iso.3.6.1.2.1.2.2.1.5.1001014 = Gauge32: 22569000
iso.3.6.1.2.1.2.2.1.5.1001015 = Gauge32: 0
iso.3.6.1.2.1.2.2.1.5.1001016 = Gauge32: 22079000
iso.3.6.1.2.1.2.2.1.5.1001017 = Gauge32: 22234000
iso.3.6.1.2.1.2.2.1.5.1001018 = Gauge32: 22079000 ]
...
iso.3.6.1.2.1.2.2.1.5.1001101 = Gauge32: 9600
iso.3.6.1.2.1.2.2.1.5.1001201 = Gauge32: 0
iso.3.6.1.2.1.2.2.1.5.1001202 = Gauge32: 0
iso.3.6.1.2.1.2.2.1.5.1001203 = Gauge32: 1000000000
iso.3.6.1.2.1.2.2.1.5.1001301 = Gauge32: 100000000
iso.3.6.1.2.1.2.2.1.5.1001302 = Gauge32: 100000000
iso.3.6.1.2.1.2.2.1.5.1002001 = Gauge32: 0
iso.3.6.1.2.1.2.2.1.5.1002002 = Gauge32: 0
iso.3.6.1.2.1.2.2.1.5.1002003 = Gauge32: 0
[ these are current signalling rates I imagine, 
iso.3.6.1.2.1.2.2.1.5.1002013 = Gauge32: 22079000
iso.3.6.1.2.1.2.2.1.5.1002014 = Gauge32: 22569000
iso.3.6.1.2.1.2.2.1.5.1002015 = Gauge32: 0
iso.3.6.1.2.1.2.2.1.5.1002016 = Gauge32: 22079000
iso.3.6.1.2.1.2.2.1.5.1002017 = Gauge32: 22234000
iso.3.6.1.2.1.2.2.1.5.1002018 = Gauge32: 22079000 ]
...
iso.3.6.1.2.1.2.2.1.5.1003001 = Gauge32: 100000000
iso.3.6.1.2.1.2.2.1.5.1003002 = Gauge32: 100000000
iso.3.6.1.2.1.2.2.1.5.1003003 = Gauge32: 100000000
...
iso.3.6.1.2.1.2.2.1.6.1001001 = Hex-STRING: 00 00 00 00 00 00
iso.3.6.1.2.1.2.2.1.6.1001002 = Hex-STRING: 00 00 00 00 00 00
iso.3.6.1.2.1.2.2.1.6.1001003 = Hex-STRING: 00 00 00 00 00 00
[these seem to hold remote device id's]
...
iso.3.6.1.2.1.2.2.1.7.1001001 = INTEGER: 1
iso.3.6.1.2.1.2.2.1.7.1001002 = INTEGER: 1
iso.3.6.1.2.1.2.2.1.7.1001003 = INTEGER: 1
...
[snip a few sections with almost all integer: 1 values, some being 2 actually, but no idea what they are]
...
iso.3.6.1.2.1.2.2.1.9.1001001 = Timeticks: (2900) 0:00:29.00
iso.3.6.1.2.1.2.2.1.9.1001002 = Timeticks: (2900) 0:00:29.00
iso.3.6.1.2.1.2.2.1.9.1001003 = Timeticks: (2900) 0:00:29.00
[DSL port uptime, for comparision
iso.3.6.1.2.1.2.2.1.9.1001013 = Timeticks: (289506900) 33 days, 12:11:09.00
iso.3.6.1.2.1.2.2.1.9.1001014 = Timeticks: (148309100) 17 days, 3:58:11.00
iso.3.6.1.2.1.2.2.1.9.1001015 = Timeticks: (2900) 0:00:29.00
iso.3.6.1.2.1.2.2.1.9.1001016 = Timeticks: (288241000) 33 days, 8:40:10.00
iso.3.6.1.2.1.2.2.1.9.1001017 = Timeticks: (28817900) 3 days, 8:02:59.00
iso.3.6.1.2.1.2.2.1.9.1001018 = Timeticks: (206057600) 23 days, 20:22:56.00]
...
iso.3.6.1.2.1.2.2.1.10.1001001 = Counter32: 0
iso.3.6.1.2.1.2.2.1.10.1001002 = Counter32: 0
iso.3.6.1.2.1.2.2.1.10.1001003 = Counter32: 0
[finally some byte [or bit?] counters, 
iso.3.6.1.2.1.2.2.1.10.1001013 = Counter32: 2300585767
iso.3.6.1.2.1.2.2.1.10.1001014 = Counter32: 922226659
iso.3.6.1.2.1.2.2.1.10.1001015 = Counter32: 0
iso.3.6.1.2.1.2.2.1.10.1001016 = Counter32: 2310047400
iso.3.6.1.2.1.2.2.1.10.1001017 = Counter32: 1855861568
iso.3.6.1.2.1.2.2.1.10.1001018 = Counter32: 1115540979
could that be what we need for graphs? no idea if it's in or out tho.]
...
iso.3.6.1.2.1.2.2.1.10.1002001 = Counter32: 0
iso.3.6.1.2.1.2.2.1.10.1002002 = Counter32: 0
iso.3.6.1.2.1.2.2.1.10.1002003 = Counter32: 0
[well, this section is exactly the same values]
iso.3.6.1.2.1.2.2.1.10.1002013 = Counter32: 2300585767
iso.3.6.1.2.1.2.2.1.10.1002014 = Counter32: 922226659
iso.3.6.1.2.1.2.2.1.10.1002015 = Counter32: 0
iso.3.6.1.2.1.2.2.1.10.1002016 = Counter32: 2310047400
iso.3.6.1.2.1.2.2.1.10.1002017 = Counter32: 1855861568
iso.3.6.1.2.1.2.2.1.10.1002018 = Counter32: 1115540979
...
iso.3.6.1.2.1.2.2.1.11.1001201 = Counter32: 0
iso.3.6.1.2.1.2.2.1.11.1001202 = Counter32: 0
iso.3.6.1.2.1.2.2.1.11.1001203 = Counter32: 247586301 // uplink port?
iso.3.6.1.2.1.2.2.1.11.1001301 = Counter32: 0
iso.3.6.1.2.1.2.2.1.11.1001302 = Counter32: 0
iso.3.6.1.2.1.2.2.1.11.1003001 = Counter32: 0
iso.3.6.1.2.1.2.2.1.11.1003002 = Counter32: 0
iso.3.6.1.2.1.2.2.1.11.1003003 = Counter32: 0
[well this  may be what we mean, finally ?]
iso.3.6.1.2.1.2.2.1.11.1003013 = Counter32: 33713168
iso.3.6.1.2.1.2.2.1.11.1003014 = Counter32: 5803753
iso.3.6.1.2.1.2.2.1.11.1003015 = Counter32: 0
iso.3.6.1.2.1.2.2.1.11.1003016 = Counter32: 15285531
iso.3.6.1.2.1.2.2.1.11.1003017 = Counter32: 11334896
iso.3.6.1.2.1.2.2.1.11.1003018 = Counter32: 5595307
...
iso.3.6.1.2.1.2.2.1.11.1003021 = Counter32: 11687785
iso.3.6.1.2.1.2.2.1.11.1003022 = Counter32: 9190357
iso.3.6.1.2.1.2.2.1.11.1003023 = Counter32: 2618400
iso.3.6.1.2.1.2.2.1.11.1003024 = Counter32: 5923142
iso.3.6.1.2.1.2.2.1.13.1001201 = Counter32: 0
iso.3.6.1.2.1.2.2.1.13.1001202 = Counter32: 0
iso.3.6.1.2.1.2.2.1.13.1001203 = Counter32: 0
[and this? but then...]
iso.3.6.1.2.1.2.2.1.13.1003013 = Counter32: 0
iso.3.6.1.2.1.2.2.1.13.1003014 = Counter32: 0
iso.3.6.1.2.1.2.2.1.13.1003015 = Counter32: 0
iso.3.6.1.2.1.2.2.1.13.1003016 = Counter32: 0
iso.3.6.1.2.1.2.2.1.13.1003017 = Counter32: 0
iso.3.6.1.2.1.2.2.1.13.1003018 = Counter32: 0
...
iso.3.6.1.2.1.2.2.1.14.1001201 = Counter32: 0
iso.3.6.1.2.1.2.2.1.14.1001202 = Counter32: 0
iso.3.6.1.2.1.2.2.1.14.1001203 = Counter32: 0
[and...]
iso.3.6.1.2.1.2.2.1.14.1002013 = Counter32: 216
iso.3.6.1.2.1.2.2.1.14.1002014 = Counter32: 31
iso.3.6.1.2.1.2.2.1.14.1002015 = Counter32: 0
iso.3.6.1.2.1.2.2.1.14.1002016 = Counter32: 287
iso.3.6.1.2.1.2.2.1.14.1002017 = Counter32: 16
iso.3.6.1.2.1.2.2.1.14.1002018 = Counter32: 32352
...
iso.3.6.1.2.1.2.2.1.15.1003013 = Counter32: 0
iso.3.6.1.2.1.2.2.1.15.1003014 = Counter32: 0
iso.3.6.1.2.1.2.2.1.15.1003015 = Counter32: 0
iso.3.6.1.2.1.2.2.1.15.1003016 = Counter32: 0
iso.3.6.1.2.1.2.2.1.15.1003017 = Counter32: 0
iso.3.6.1.2.1.2.2.1.15.1003018 = Counter32: 0
...
iso.3.6.1.2.1.2.2.1.16.1001013 = Counter32: 505345073
iso.3.6.1.2.1.2.2.1.16.1001014 = Counter32: 2292283264
iso.3.6.1.2.1.2.2.1.16.1001015 = Counter32: 0
iso.3.6.1.2.1.2.2.1.16.1001016 = Counter32: 1127184131
iso.3.6.1.2.1.2.2.1.16.1001017 = Counter32: 759276361
iso.3.6.1.2.1.2.2.1.16.1001018 = Counter32: 2457934594
...
iso.3.6.1.2.1.2.2.1.16.1001201 = Counter32: 84
iso.3.6.1.2.1.2.2.1.16.1001202 = Counter32: 15784751
iso.3.6.1.2.1.2.2.1.16.1001203 = Counter32: 800023769
iso.3.6.1.2.1.2.2.1.16.1001301 = Counter32: 0
iso.3.6.1.2.1.2.2.1.16.1001302 = Counter32: 0
iso.3.6.1.2.1.2.2.1.16.1002001 = Counter32: 0
iso.3.6.1.2.1.2.2.1.16.1002002 = Counter32: 0
iso.3.6.1.2.1.2.2.1.16.1002003 = Counter32: 0
...
iso.3.6.1.2.1.2.2.1.16.1002013 = Counter32: 505345073
iso.3.6.1.2.1.2.2.1.16.1002014 = Counter32: 2292283264
iso.3.6.1.2.1.2.2.1.16.1002015 = Counter32: 0
iso.3.6.1.2.1.2.2.1.16.1002016 = Counter32: 1127184131
iso.3.6.1.2.1.2.2.1.16.1002017 = Counter32: 759276361
iso.3.6.1.2.1.2.2.1.16.1002018 = Counter32: 2457934594
...
and so on, I'm sorry this is all Greek to me :] 
with some interesting encounters, like:
iso.3.6.1.2.1.4.24.4.1.1.0.0.0.0.0.0.0.0.0.192.168.0.1 = IpAddress: 0.0.0.0
iso.3.6.1.2.1.4.24.4.1.2.0.0.0.0.0.0.0.0.0.192.168.0.1 = IpAddress: 0.0.0.0
iso.3.6.1.2.1.4.24.4.1.3.0.0.0.0.0.0.0.0.0.192.168.0.1 = INTEGER: 0
iso.3.6.1.2.1.4.24.4.1.4.0.0.0.0.0.0.0.0.0.192.168.0.1 = IpAddress: ########gw IP masked######
iso.3.6.1.2.1.4.24.4.1.5.0.0.0.0.0.0.0.0.0.192.168.0.1 = INTEGER: 1001301
iso.3.6.1.2.1.4.24.4.1.7.0.0.0.0.0.0.0.0.0.192.168.0.1 = INTEGER: 2
iso.3.6.1.2.1.4.24.4.1.16.0.0.0.0.0.0.0.0.0.192.168.0.1 = INTEGER: 1


some I recognize, e.g.

iso.3.6.1.2.1.10.94.1.1.1.1.4.1001001 = STRING: "SC_HS24"
iso.3.6.1.2.1.10.94.1.1.1.1.4.1001002 = STRING: "SC_HS24"
iso.3.6.1.2.1.10.94.1.1.1.1.4.1001003 = STRING: "HS_20"

is the speed profile name;
iso.3.6.1.2.1.10.94.1.1.2.1.1.1001001 = ""
iso.3.6.1.2.1.10.94.1.1.2.1.1.1001002 = ""
iso.3.6.1.2.1.10.94.1.1.2.1.1.1001003 = ""

is customer/port information, probably;

iso.3.6.1.2.1.10.94.1.1.2.1.2.1001001 = STRING: "Broadcom"
iso.3.6.1.2.1.10.94.1.1.2.1.2.1001002 = STRING: "Broadcom"
iso.3.6.1.2.1.10.94.1.1.2.1.2.1001003 = STRING: "Broadcom"
is near-side vendor info or something;

and then the snmpwalk was taking very long and I cancelled it after 192512 bytes...
iso.3.6.1.2.1.10.94.1.1.8.1.2.1001004.95 = Gauge32: 0
iso.3.6.
[EOF]

this compared with what we get from e.g. ZyXEL IES-line, where the 'usual'
way of creating graphs works:
iso.3.6.1.2.1.2.2.1.16.1 = Counter32: 2136820939
iso.3.6.1.2.1.2.2.1.16.2 = Counter32: 2964022725
iso.3.6.1.2.1.2.2.1.16.3 = Counter32: 1734187082
[i guess these are the bit or byte counters]

How can I get the Paradyne to work?

Sorry for the length of this.

Lukasz




------------------------------------------------------------------------------
LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
Remotely access PCs and mobile devices and provide instant support
Improve your efficiency, and focus on delivering more value-add services
Discover what IT Professionals Know. Rescue delivers
http://p.sf.net/sfu/logmein_12329d2d