Re: Combining three graphs into one

Hi Alan,

I really hate to be a bother but I have one more questions for you  
regarding this.  I've calculated the new RRA definitions, edited the  
crontab to poll at one minute intervals; however I've not changed the  
Defaults file under the cricket-config directory.

I want to now move to the new polling, but keep the old RRD graphs as  
historical data; how can I keep these graphs around and accessible? I  
have all the cricket-data RRD files but again, need to move it to  
like a "previous history" directory before the change.

Also, what file do I need to change to change the grapher?

Ernesto
On May 29, 2007, at 2:11 PM, Alan Edmonds wrote:

> That's a bit tougher. you need to edit your crontab to poll at one  
> minute intervals.
> The harder job is to create new rra definitions for 1 min  
> resolution data points.
> If you do this, you will loose all of the data you have collected  
> so far.
>
> To change the grapher, that's not so bad.  You have to just change  
> the values of the ranges in grapher.cgi.  But it won't change the  
> data.
> I added a new range "half-week" to my grapher that shows three and  
> a half days.  It's handy for looking back over a three day weekend.
> -----Original Message-----
> From: Ernesto Rubi [mailto:[email protected]]
> Sent: 29 May 2007 19:04
> To: Alan Edmonds
> Subject: Re: [cricket-users] Combining three graphs into one
>
> Now that we're on the subject, do you know how I can bring the  
> polling time to 1 minute, 5 minutes, 5 minutes and 30 minutes for  
> the daily,weekly,monthly and yearly graphs for all my graphs?  I've  
> looked for a global config file to do this but I can't find it.
>
> Thanks,
>
>
> On May 29, 2007, at 11:54 AM, Alan Edmonds wrote:
>
>> did it work?  It should be target-type not targe-type and it  
>> should be the type of target (just like the GigabitEthernet3/6  
>> target entries.  )
>> The values of mtargets are the target NAMEs.
>>
>> examples
>>
>> target interface1
>>     target-type = standard-interface
>>     short-desc = "blah blah blah"
>>
>> target interface2
>>     target-type = standard-interface
>>     short-desc = "balh..."
>>
>> target WHREN
>>     target-type = standard-interface
>>     mtargets = "interface1;interface2"
>>     mtarget-ops = sum()
>> or
>>     mtargets-ops = sum()
>>
>> Alan
>> -----Original Message-----
>> From: Ernesto Rubi [mailto:[email protected]]
>> Sent: 29 May 2007 16:47
>> To: Alan Edmonds
>> Subject: Re: [cricket-users] Combining three graphs into one
>>
>> target WHREN
>>         mtargets =  
>> "GigabitEthernet3/6;GigabitEthernet3/3.2006-802.1Q vLAN subif"
>>         mtargets-ops = sum()
>>         targe-type = mtargets-ops
>>         short-desc    =    "Combined  Traffic on STM-16"
>>         long-desc    =    "Combined Traffic on STM-16"
>>
>> On May 29, 2007, at 11:44 AM, Alan Edmonds wrote:
>>
>>> It could also be mtarget-ops or mtargets-ops.  There is some  
>>> disagreement in the code as well.
>>> -----Original Message-----
>>> From: Ernesto Rubi [mailto:[email protected]]
>>> Sent: 29 May 2007 16:43
>>> To: Alan Edmonds
>>> Subject: Re: [cricket-users] Combining three graphs into one
>>>
>>> Should the target type be: "sub-interface"?
>>> I've specified the name to be something other than "all" and it  
>>> didn't complain.
>>>
>>> Thanks again for the prompt help!
>>>
>>> On May 29, 2007, at 11:37 AM, Alan Edmonds wrote:
>>>
>>>> You also need a target-type entry as well.....
>>>>
>>>> copy an existing target.
>>>> change the name to  "all" or something like that - the name  
>>>> doesn't matter that much.
>>>> Add the mtargets = and mtargets-ops = tags and that should do it.
>>>> -----Original Message-----
>>>> From: Ernesto Rubi [mailto:[email protected]]
>>>> Sent: 29 May 2007 16:31
>>>> To: Alan Edmonds
>>>> Subject: Re: [cricket-users] Combining three graphs into one
>>>>
>>>> thanks, I'll config that now...
>>>>
>>>> Ernie
>>>>
>>>> On May 29, 2007, at 11:15 AM, Alan Edmonds wrote:
>>>>
>>>>>
>>>>> piece of cake.
>>>>>
>>>>> create a new target
>>>>>
>>>>> target all
>>>>> mtargets = "interface1;interface2;interface3"
>>>>> mtargets-ops = sum()
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: [email protected]
>>>>> [mailto:[email protected]]On Behalf  
>>>>> Of Ernesto
>>>>> Rubi
>>>>> Sent: 29 May 2007 16:09
>>>>> To: [email protected]
>>>>> Subject: [cricket-users] Combining three graphs into one
>>>>>
>>>>>
>>>>> Hi folks,
>>>>>
>>>>> I'm looking to combine the values of three different interfaces  
>>>>> into
>>>>> one 'aggregate' graph showing the total traffic going across the
>>>>> router.  Does anyone have any docs or an idea on how to get  
>>>>> this done?
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Ernesto
>>>>> ------------------------------------------------------------------ 
>>>>> -------
>>>>> This SF.net email is sponsored by DB2 Express
>>>>> Download DB2 Express C - the FREE version of DB2 express and take
>>>>> control of your XML. No limits. Just data. Click to get it now.
>>>>> http://sourceforge.net/powerbar/db2/
>>>>> _______________________________________________
>>>>> cricket-users mailing list
>>>>> [email protected]
>>>>> https://lists.sourceforge.net/lists/listinfo/cricket-users
>>>>> T-Mobile International UK Limited
>>>>> Company Registered Number: 3951860
>>>>> Registered Office Address: Hatfield Business Park, Hatfield,  
>>>>> Hertfordshire, AL10 9BW
>>>>> Registered in England and Wales
>>>>>
>>>>> NOTICE AND DISCLAIMER
>>>>>
>>>>> This email (including attachments) is confidential. If you are  
>>>>> not the intended recipient, notify the sender immediately,  
>>>>> delete this email from your system and do not disclose or use  
>>>>> for any purpose
>>>>
>>>> Ernesto M. Rubi
>>>> Sr. Network Engineer
>>>> AMPATH/CIARA
>>>> Florida International Univ, Miami
>>>> Reply-to: [email protected]
>>>> Cell: 786-282-6783
>>>>
>>>>
>>>>
>>>>
>>>> T-Mobile International UK Limited
>>>> Company Registered Number: 3951860
>>>> Registered Office Address: Hatfield Business Park, Hatfield,  
>>>> Hertfordshire, AL10 9BW
>>>> Registered in England and Wales
>>>>
>>>> NOTICE AND DISCLAIMER
>>>>
>>>> This email (including attachments) is confidential. If you are  
>>>> not the intended recipient, notify the sender immediately,  
>>>> delete this email from your system and do not disclose or use  
>>>> for any purpose
>>>
>>>
>>>
>>>
>>>
>>>
>>> T-Mobile International UK Limited
>>> Company Registered Number: 3951860
>>> Registered Office Address: Hatfield Business Park, Hatfield,  
>>> Hertfordshire, AL10 9BW
>>> Registered in England and Wales
>>>
>>> NOTICE AND DISCLAIMER
>>>
>>> This email (including attachments) is confidential. If you are  
>>> not the intended recipient, notify the sender immediately, delete  
>>> this email from your system and do not disclose or use for any  
>>> purpose
>>
>>
>>
>>
>>
>> T-Mobile International UK Limited
>> Company Registered Number: 3951860
>> Registered Office Address: Hatfield Business Park, Hatfield,  
>> Hertfordshire, AL10 9BW
>> Registered in England and Wales
>>
>> NOTICE AND DISCLAIMER
>>
>> This email (including attachments) is confidential. If you are not  
>> the intended recipient, notify the sender immediately, delete this  
>> email from your system and do not disclose or use for any purpose
>
> Ernesto M. Rubi
> Sr. Network Engineer
> AMPATH/CIARA
> Florida International Univ, Miami
> Reply-to: [email protected]
> Cell: 786-282-6783
>
>
>
>
> T-Mobile International UK Limited
> Company Registered Number: 3951860
> Registered Office Address: Hatfield Business Park, Hatfield,  
> Hertfordshire, AL10 9BW
> Registered in England and Wales
>
> NOTICE AND DISCLAIMER
>
> This email (including attachments) is confidential. If you are not  
> the intended recipient, notify the sender immediately, delete this  
> email from your system and do not disclose or use for any purpose
>

Ernesto M. Rubi
Sr. Network Engineer
AMPATH/CIARA
Florida International Univ, Miami
Reply-to: [email protected]
Cell: 786-282-6783




-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/