Re: Intel D510MO board, gpxe chainloading problem and gpxe problem

On Thu, Apr 1, 2010 at 11:44 AM, Jörn Rink <[email protected]> wrote:
> After looking in the bios, i saw, that the board has gpxe implemented!!
> So i decide to boot directly from gpxe.
>
> It works, but during every boot phase, i have to press the b key, to
> boot into gpxe.

The gPXE network boot should be in your boot device order.  Have you
checked the BIOS to ensure that it will boot using gPXE before trying
other methods?

Can you send the first output exactly as it is printed?  It should be
something like this:
gPXE (http://etherboot.org) - 00:00.0 D100 PCI2.10 PnP BBS PMM07E0@10 D100

This will tell us exactly which ROM initialization code path gPXE is
taking.  This matters because gPXE tries to hook into the boot process
in several ways, depending on the BIOS.

Stefan

------------------------------------------------------------------------------
Download Intel&#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev