Re: Intel D510MO board, gpxe chainloading problem and gpxe problem

Am Thu, 1 Apr 2010 12:11:40 +0100
hat Stefan Hajnoczi <[email protected]> (Stefan Hajnoczi) folgendes
geschrieben:

> On Thu, Apr 1, 2010 at 11:44 AM, Jörn Rink <[email protected]> wrote:
> > After looking in the bios, i saw, that the board has gpxe
> > implemented!! So i decide to boot directly from gpxe.
> >
> > It works, but during every boot phase, i have to press the b key, to
> > boot into gpxe.
> 
> The gPXE network boot should be in your boot device order.  Have you
> checked the BIOS to ensure that it will boot using gPXE before trying
> other methods?
> 
> Can you send the first output exactly as it is printed?  It should be
> something like this:
> gPXE (http://etherboot.org) - 00:00.0 D100 PCI2.10 PnP BBS PMM07E0@10
> D100
> 

It is in my boot device order, it will boot, but the board told me to
press b to boot from gPXE (PCI 01:00:00)

then, when i press b, gpxe is bootet and all is fine, but i dont want
to press always the b on the keyboard.



-- 
Nine (not 9)
Never trust a hippie

------------------------------------------------------------------------------
Download Intel&#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Etherboot-discuss mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/etherboot-discuss