Re: doubts on ethereal and ppp0 interface

Guy Harris <[email protected]>
Newsgroups gmane.network.ethereal.user
Message-ID <[email protected]>
[email protected] wrote:

> 1. On ppp0 interface, which traffic Ethereal listens. Whether it listens
> traffic between data card/modem and socket or between modem and kernel or
> traffic going  or coming to data card.

It listens at whatever layer the underlying packet capture mechanism 
libpcap/WinPcap uses listens, as Ethereal/Wireshark uses libpcap on UN*X 
and WinPcap on Windows to capture traffic.

That means it listens to traffic received by the PPP code in the OS from 
the networking layer above it and supplied by the PPP code in the OS to 
the networking layer (i.e., you will *NOT* see RFC 1662-style escape bytes).

> 2. On ppp0 interface if we send ICMP packet of size greater than 7300
> bytes from sender machine and if 100 packets of 7300 bytes are sent
> through ping program , 7300 bytes are splitted into 5 fragments. Now in
> Ethereal log on sender m/c I found that for the packet if all 5 fragments
> of it are not sent then Ethereal has logged all the fragments till all the
> fragments of that packet are sent successfully. Who is sending repeated
> fragments till all the fragments are successfully sent

So the capture file shows some fragments being sent multiple times?
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.