Re: Cannot bootstrap GNUnet 0.21.0

Hi,

what does gnunet-arm -I output? Are all of the services running?
For example, the peerstore database layout changed, so you probably have 
to delete your old database ($HOME/.local/share/gnunet/peerstore/sqlite.db).

The road to a stable TNG will also be bumpy, so we rely on reports such 
as this to iron out the remaining bugs with it.

BR
Martin

On 10.03.24 06:08, marty1885 wrote:
> Thanks for the reply.
> 
> I tried a few commands and still feels like my node is really not connected. DHT can't put, NSE returns a very small network size and GNS cannot resolve.
> 
> Is this expected?
> 
> ```
> ❯ gnunet-core -si
> Current local peer identity: CCXHBE49GRQVFAVFQ3BXVXPHHD63NG6ZNY31R0F59KVDZQA42PTG
> (no further output)
> 
> ❯ gnunet-dht-put -k "hello" -d "world" -e 40m
> (hangs, this used to return almost immidately)
> 
> ❯ gnunet-nse
> 1710047156276913 1.688203 0.755488 1.474102
> 
> ❯ gnunet-gns -u gnunet.gns.alt -t PKEY
>>>> Looking for `PKEY' records under `gnunet.gns.alt'
> (no output)
> ```
> 
> On Saturday, March 9th, 2024 at 11:39 PM, Schanzenbach, Martin <[email protected]> wrote:
> 
>> Hi,
>>
>> the behaviour of gnunet-core changed. You can check the new switches
>> with --help.
>> Long-term core connections are know to be problematic behind NATs, still.
>> But with a freshly started peer, "gnunet-core -i" should give you your
>> peer id, "gnunet-core -s" the connections (you can also combine the
>> switches).
>> The command should probably output the help when called without arguments.
>>
>> BR
>> Martin
>>
>> On 09.03.24 14:55, marty1885 wrote:
>>
>>> Hi all,
>>>
>>> I've just built and installed the new GNUnet 0.21. But my node isn't connected to any peer after hours of waiting. Running gnunet-core shows no node is connected to me.
>>>
>>> `❯ gnunet-core (no output)`
>>>
>>> I have also checked `iotop` and can confirm gnunet-service-transport isn't doing much IO. While I was expecting at least hundreds of Kbps from experience in the past.
>>>
>>> How can I connect to the network? Please let me know what information I can provide to diagnose the issue.
>>>
>>> Best,
>>> Martin
>