Re: SNMP Disk Space Negative Values

"Courtney, Wrolf" <[email protected]>
Newsgroups gmane.network.mrtg.user
Message-ID <C22DA43300E0E24F8BCA9A53CE460F2E240F9EF1@NYCT2BWYEXMB01.transit.nyct.com>
________________________________________
From: mrtg [[email protected]] on behalf of Mr. James W. Laferriere [[email protected]]
Sent: Tuesday, November 25, 2014 5:52 PM
To: Christian Arnaut
Cc: [email protected]
Subject: Re: [mrtg] SNMP Disk Space Negative Values

        Hello Christian ,  While no expert ,  I (off the top of my head) think
may be a wrap around error for Snmp-V1 try snmp-V2 ,  add ":::::2" to the end of
the query string .

                Hth ,  JimL

You have reached a limitation of host resources MIB - with block size of 4096 bytes, counters wrap at about 9TB.

The problem is SNMP, not MRTG. http://tools.ietf.org/html/rfc2790.html#page-11

Wrolf

On Tue, 25 Nov 2014, Christian Arnaut wrote:

> Am attempting to use MRTG to monitor disk space on a Windows Server as I have done on multiple servers and workstations in the past. However, this time the local storage capacity on the local drive partition is nearly 15TB.
>
> It appears that I have exceeded an SNMP threshold where the integer values are now negative numbers. For example to monitor total space on the C: drive I used (simplified)... iso.3.6.1.2.1.25.2.3.1.4.2 * iso.3.6.1.2.1.25.2.3.1.6.2
>
> iso.3.6.1.2.1.25.2.3.1.3.2 = STRING: "C:\\ Label:"
> iso.3.6.1.2.1.25.2.3.1.3.4 = STRING: "E:\\ Label:"
> iso.3.6.1.2.1.25.2.3.1.4.2 = INTEGER: 4096
> iso.3.6.1.2.1.25.2.3.1.4.4 = INTEGER: 4096
> iso.3.6.1.2.1.25.2.3.1.5.2 = INTEGER: 10350335
> iso.3.6.1.2.1.25.2.3.1.5.4 = INTEGER: -268468737
> iso.3.6.1.2.1.25.2.3.1.6.2 = INTEGER: 6261795
> iso.3.6.1.2.1.25.2.3.1.6.4 = INTEGER: -527400222
>
> With the E: drive, iso.3.6.1.2.1.25.2.3.1.4.4 correctly shows the cluster size (4096). However, I am sure the total number of clusters isn't '-527400222'. Even if I used the absolute value of 527400222, the numbers don't add up to the 15TB partition size.
>
> Any suggestions? Or have I reached the limitation of MRTG for the purpose I am looking for?
>
>
> Thank you, in advance, for any assistance!
>
> ~Christian
>

--
+------------------------------------------------------------------+
| James   W.   Laferriere | System    Techniques | Give me VMS     |
| Network&System Engineer | 3237     Holden Road |  Give me Linux  |
| [email protected] | Fairbanks, AK. 99709 |   only  on  AXP |
+------------------------------------------------------------------+

_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.