RE: Trap session query

Hi Robert/Coders,

I had asked a question related to traps which can be seen in this mail thread.
Thanks Robert for your answer.

In relation to that, I have one more query again.
Below is the configuration, where all 3 sessions are destined to same IP and port (could be a wrong configuration).
In this case, will there be 3 trapsessions to same destination IP:port? Or will SNMP filter out the duplicated sessions and have only one session?

createUser Operator1 MD5 "password@123"

trapsess -v 3 -u Operator1 -l authNoPriv  192.168.0.100:162
trapsess -v 3 -u Operator1 -l authNoPriv  192.168.0.100:162
trapsess -v 3 -u Operator1 -l authNoPriv  192.168.0.100:162

Appreciate the response.
Thanks in advance.

Regards,
Madhu
From: Madhusudhana R
Sent: Thursday, November 09, 2017 5:05 PM
To: [email protected]
Subject: Trap session query

Hi Coders,

My query is regarding trap sessions.
I have a below configuration where I have a trap user 'Operator1'created with 3 trap sessions with different IP: Port as shown below.

createUser Operator1 MD5 "password@123"

trapsess -v 3 -u Operator1 -l authNoPriv  192.168.0.100:162
trapsess -v 3 -u Operator1 -l authNoPriv  192.168.0.101:162
trapsess -v 3 -u Operator1 -l authNoPriv  192.168.0.102:162

I need to understand whether Operator1 will have 3 live trap sessions sending traps to all 3 IP addresses or will it have one trap session sending traps to 192.168.0.102:162 alone?

Appreciate any response.

Thanks in advance.

Regards,
Madhu

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot

_______________________________________________
Net-snmp-coders mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders