Re: Need the Help for the SNMP alarms on 38282 .

Magnus Fromreide <[email protected]>
Newsgroups gmane.network.net-snmp.devel
Message-ID <[email protected]>
On Thu, Oct 18, 2018 at 03:13:18PM +0530, Ravi Shanker K N via Net-snmp-coders wrote:
> Hello Team ,
> 
>   I need your support for one of the alarm . It will be great if anyone of
> us can help me .
> 
>  We are receiving the snmp alarms as below in the F5(Load balancer) ,
> 
>  F5-BIGIP-LOCAL-MIB::ltmPoolMemberStatServerCurConns."/Common/MMP_DMZ_38282"."/Common/TPS2-HC-2103-DMZ-1".38282
> = Wrong Type (should be Gauge32 or Unsigned32): Counter64: 0
> F5-BIGIP-LOCAL-MIB::ltmPoolMemberStatServerCurConns."/Common/MMP_DMZ_38282"."/Common/TPS2-HC-2103-DMZ-2".38282
> = Wrong Type (should be Gauge32 or Unsigned32): Counter64: 21
> 
> So anyone can guide us the root cause such alarms ?

You would be bettor off asking in a F5 load balancer forum.
SNMP is just the protocol carrying the messages here.

/MF

> Thanks and Regards,
> Ravi Shanker K.N
> Contact : 9611144693
> Consultant Engineer - Ericsson MMP


> _______________________________________________
> Net-snmp-coders mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.