SNMPv1 on IPv6

My snmpwalk doesn't work well with IPv6.

I start snmpd with
# snmpd udp6:161

and run snmpwalk

# snmpwalk -v 3 -u name -l authNoPriv -A password
udp6:[::1] system
SNMPv2-MIB::sysDescr.0 = STRING: Linux XMUEII-CVS
2.4.21-4.ELsmp #1 SMP Fri Oct 3 17:52:56 EDT 2003 i686
SNMPv2-MIB::sysObjectID.0 = OID:
NET-SNMP-MIB::netSnmpAgentOIDs.10
SNMPv2-MIB::sysUpTime.0 = Timeticks: (2805) 0:00:28.05
SNMPv2-MIB::sysContact.0 = STRING: Unkown
SNMPv2-MIB::sysName.0 = STRING: XMUEII-CVS
SNMPv2-MIB::sysLocation.0 = STRING: Unkown
SNMPv2-MIB::sysServices.0 = INTEGER: 76
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (1)
0:00:00.01
SNMPv2-MIB::sysORID.1 = OID: IF-MIB::ifMIB
SNMPv2-MIB::sysORID.2 = OID: SNMPv2-MIB::snmpMIB
SNMPv2-MIB::sysORID.3 = OID: TCP-MIB::tcpMIB
SNMPv2-MIB::sysORID.4 = OID: IP-MIB::ip
SNMPv2-MIB::sysORID.5 = OID: UDP-MIB::udpMIB
SNMPv2-MIB::sysORID.6 = OID:
SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup
SNMPv2-MIB::sysORID.7 = OID:
SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance
SNMPv2-MIB::sysORID.8 = OID:
SNMP-MPD-MIB::snmpMPDCompliance
SNMPv2-MIB::sysORID.9 = OID:
SNMP-USER-BASED-SM-MIB::usmMIBCompliance
SNMPv2-MIB::sysORDescr.1 = STRING: The MIB module to
describe generic objects for network interface
sub-layers
SNMPv2-MIB::sysORDescr.2 = STRING: The MIB module for
SNMPv2 entities
SNMPv2-MIB::sysORDescr.3 = STRING: The MIB module for
managing TCP implementations
SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for
managing IP and ICMP implementations
SNMPv2-MIB::sysORDescr.5 = STRING: The MIB module for
managing UDP implementations
SNMPv2-MIB::sysORDescr.6 = STRING: View-based Access
Control Model for SNMP.
SNMPv2-MIB::sysORDescr.7 = STRING: The SNMP Management
Architecture MIB.
SNMPv2-MIB::sysORDescr.8 = STRING: The MIB for Message
Processing and Dispatching.
SNMPv2-MIB::sysORDescr.9 = STRING: The management
information definitions for the SNMP User-based
Security Model.
SNMPv2-MIB::sysORUpTime.1 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.2 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.3 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.4 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.5 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.6 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.7 = Timeticks: (1) 0:00:00.01
SNMPv2-MIB::sysORUpTime.8 = Timeticks: (1) 0:00:00.01
SNMPv2-MIB::sysORUpTime.9 = Timeticks: (1) 0:00:00.01


It works well. But when I use SNMPv1

# snmpwalk -v 1 -c rdscpublic udp6:[::1] system
Timeout: No Response from udp6:[::1]

The community name is correct because I've tested it
on IPv4. What's wrong with this?


		
___________________________________________________________ 
雅虎免费G邮箱－No.1的防毒防垃圾超大邮箱 
http://cn.mail.yahoo.com/?id=77072


-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users