RE: timeout problem in windows a bug?

i have installed the net-snmp binary on two windows pc's and have
deactivated the original snmp agents on both machines. The machines are
connected in a simple LAN with each other (only network cable).
I have configured the snmpd.conf files on each machine with the "snmpconf -g
basic_setup" command.
these are the snmpd.conf files from the machines:

# snmpd.conf machine 1 begin
rwuser admin auth

rouser user noauth

rocommunity nwro 192.168.1.105

rwcommunity nw 192.168.1.105

syslocation pc

syscontact admin@localhost

sysservices 76

trapsink nwpc psitrap 162

trap2sink nwpc psitrap 162

informsink nwpc psitrap 162

trapcommunity nwtrap

authtrapenable 1

# snmpd.conf  machine 1end

# snmpd.conf machine 2 begin
rwuser admin2 auth

rouser user2 noauth

rocommunity nw2ro 192.168.1.106

rwcommunity nw2 192.168.1.106

syslocation pc2

syscontact admin2@localhost

sysservices 76

trapsink nwpc2 psitrap 162

trap2sink nwpc2 psitrap 162

informsink nwpc2 psitrap 162

trapcommunity nwtrap2

authtrapenable 1

# snmpd.conf  machine 2 end

All snmp commands are working on each machine when the net-snmp agents are
enabledon each machine.
But when i try to send a snmp command to the other machine i get the "time
out no response" error.

When i enable the original snmp agent of windows on one machine i can send
any net-snmp commands and they work.
Please let me know if i make any mistakes.

with best regards





-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users