RE: timeout problem in windows a bug?
Dave Shield <[email protected]>
| Newsgroups | gmane.network.net-snmp.user |
|---|---|
| Message-ID | <[email protected]> |
On Wed, 2005-10-05 at 13:34 +0200, taner memet ali wrote: > i have installed the net-snmp binary on two windows pc's What are the IP addresses of the two machines? Is it: machine 1 192.168.1.105 machine 2 192.168.1.106 or the other way round? > rocommunity nwro 192.168.1.105 > rwcommunity nw 192.168.1.105 Try with an "open" community setting, rather than restricted to one particular machine. I.e. rocommunity nwro rwcommunity nw > trapsink nwpc psitrap 162 > trap2sink nwpc psitrap 162 > informsink nwpc psitrap 162 Arggghhhhh!!!!! Why oh why do you want to send *three* copies of each and every trap? Pick *one* of these three, and delete the other two! [Sorry, but that's one of my pet peeves!] > All snmp commands are working on each machine when > the net-snmp agents are enabled on each machine. So you can actually query the local agent, and receive a response - yes? > But when i try to send a snmp command to the other > machine i get the "time out no response" error. That sounds as if you've got the IP addresses the wrong way round in the two community directives. That each system is configured with its own IP address, and refuses to talk to the other system. Try omitting the IP addresses, and see if that helps. Dave ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users