Re: Windows and Net-SNMP

Much appreciated everyone. Changing the snmpd.conf
helped and also using sysUpTime.0 cracked it for me.

Thanks now for the real work on this.

Cheers,
garyc


--- Juan Silva <[email protected]> wrote:

> Hello Gary !
>    
>   My first suggestion will be to test the command
> using the actual OID number, 
>   and sysUpTime.0 (instead of sysUpTime), just in
> case. 
>   The tutorial uses system.sysUpTime.0 for your
> command.
>   (
>
http://www.net-snmp.org/tutorial/tutorial-5/commands/snmpget.html
> )
>    
>   The "Retrieving a Single MIB Value" and
> "Retrieving Multiple MIB Values" sections in Chapter
> 7 of O'reilly's "Essential SNMP" book, second
> edition, include sample commands and perl scripts
> that I found the most useful to test Net-SNMP. You
> probably have seen those already.
>    
>   My second suggestion would be to restart the
> NetSNMP agent to make sure your 
>   changes to config are implemented. Not sure if
> this will fix your problem, but double check just in
> case.  It is a simple fix but can save you time if
> this is it. If the restart does not work for you, I
> would recommend you double check the code in your
> config files and file locations. 
>    
>   Regarding the restart of the SNMP agent, I was
> also getting errors after 
>   making configuration changes because I had not
> restarted the SNMP 
>   agent (I describe below how to restart it, so you
> can give it a try). 
>   Note: I believe it was not needed to reboot
> Windows.
>    
>   After installation you need to go to the Windows
> Control Panel --> 
>   Administrative Tools --> Services. 
>   There scroll down until you find the NetSNMP
> Agent.
>   If it reads "Started", right-click on it and
> select "Stop". It will take just a 
>   few seconds. After is has been stopped,
> right-click again and 
>   select "Start".
>   Else, if it does not read "Started", right-click
> and select "Start".
>   Then try your command again.
> 
>   Hope this helps...
>    
>   Juan
>   
> gary clark <[email protected]> wrote:
>   Hey,
> 
> I have a quick question regarding Net-SNMP on
> windows:
> 
> Just installed Net-SNMP 5.1.3.
> Built snmpd and setup the snmpd.conf file.
> Ran the command:
> snmpd -a -d -Lf tempfile
> 
> I then perform the command:
> snmpget -v 2c -c public localhost sysUpTime
> 
> on the same machine:
> 
> When examining the tempfile, I can see that the
> agent
> received the SNMP GET request:
> 
> Received SNMP packet(s) from UDP: [127.0.0.1]:1443
> GET message
> -- SNMPv2-MIB::sysUpTime
> 
> Sending 94 Bytes to UDP:[127.0.0.1]:162
> 
> Ok I get a timeout on the snmpget and dont see any
> sysUpTime?
> 
> Any ideas?
> 
> Thanks,
> Garyc
> 
> -- SNMPv2-MIB::sysUpTime
> 
>
-------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support
> web services, security?
> Get stuff done quickly with pre-integrated
> technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1
> based on Apache Geronimo
>
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Net-snmp-users mailing list
> [email protected]
> Please see the following page to unsubscribe or
> change other options:
>
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
> 
> 
>  				
> ---------------------------------
> Want to be your own boss? Learn how on  Yahoo! Small
> Business. 


-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users