RE: Monitoring CPU Temp

<[email protected]>
Newsgroups gmane.network.net-snmp.user
Message-ID <[email protected]>
Hi Dave,

Thanks for your answer.
Now I am able to get traps for CPU temperature and Voltage levels
monitoring.
But if I issue snmpwalk on "lmFanSensorsTable" object I am getting an
error msg as below.
".1.3.6.1.4.1.2021.13.16.3 = No Such Object available on this agent at
this OID."

For Other lmSensorsTables I was able to get the result.

Is 'lmFanSensorsTable' is supported in the Net-SNMP v 5.3.1
Our System Details are - 5.10 Generic sun4u sparc SUNW,Netra-240

If I issue prtpicl to fan sensors , I am getting the output as given
below.
#prtpicl -v -c fan
  f2_rs (fan, 4c00000923)
  :_fru_parent   (4c000006ccH)
  :Label         RS
  :SpeedUnit      rpm
  :LowWarningThreshold   0x7d0
  :Speed         0x113b
  :_class        fan
  :name  f2_rs
  f3_rs (fan, 4c0000092a)
  :_fru_parent   (4c000006d1H)
  :Label         RS
  :SpeedUnit      rpm
  :LowWarningThreshold   0x7d0
  :Speed         0xf11
  :_class        fan
  :name  f3_rs
  ...


Thanks,
Sailaja

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Dave Shield
Sent: Monday, July 31, 2006 2:34 PM
To: Sailaja Banda (WT01 - Broadband Networks)
Cc: [email protected]
Subject: Re: Monitoring CPU Temp

On 29/07/06, [email protected] <[email protected]> wrote:
> We want Net-SNMP agent to generate alarms when the CPU temperature
goes
> above the set threshold value.
> Can any suggest us what are the monitor directives that needs to be
added to
> the file snmpd.conf.

Untested, but try something like

  monitor -o lmTempSensorsDevice "temperature"  lmTempSensorsValue >
1000

(or whatever threshold you feel appropriate).
With that, and a suitable trap destination, and internal query
settings (iquerySecName plus access control), the agent should report
whenever a temperature sensor exceeds the given threshold.

Similarly for the other types of sensor variables.


> We have added  "defaultMonitors yes" to snmpd.conf file.

No - the (experimental) sensors MIB is not part of the defaultMonitors
setup.
See the documentation for what this does cover.

Dave

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.