RE: Upgrading SNMP

Still the same. Timeout after 10 seconds.

Meanwhile, I switched to another server and from this server snmpget
requests are executing fine except some OIDs generate an error:

[root@nagios rra]# snmpget -v 1 -c public wcmws01
.1.3.6.1.4.1.2021.11.52.0
Error in packet
Reason: (noSuchName) There is no such variable name in this MIB.
Failed object: UCD-SNMP-MIB::ssCpuRawSystem.0


[root@nagios rra]# snmpget -v 1 -c public wcmws01 sysUpTime.0
SNMPv2-MIB::sysUpTime.0 = Timeticks: (188833239) 21 days, 20:32:12.39

The OID is correct (for CPU) and I ran it against other systems which
responded fine.

Any ideas on what could be wrong here ?

Thanks,

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Dave Shield
Sent: quarta-feira, 27 de Setembro de 2006 14:21
To: Sandeep Narasimha Murthy
Cc: [email protected]
Subject: Re: Upgrading SNMP

On 08/09/06, Sandeep Narasimha Murthy <[email protected]>
wrote:
> All the servers are responding fine except 2 webservers in an isolated
> network. The machines accept SNMP requests from the Cacti server fine
> however every second request results in a NO RESPONSE as follows:

Ummm...
Nothing much springs to mind here.

All that I can think is that the remote system is relatively heavily
loaded, and every other request is timing out.

What happens if you try adding "-t 10" to the snmpget commands?
Do you see the same behaviour?

Dave

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users