Re: where to set retries/timeout time, problem in set request
"Awadhesh Kumar" <[email protected]>
| Newsgroups | gmane.network.net-snmp.user |
|---|---|
| Message-ID | <[email protected]> |
Hi,
Thanks for the quick response. After setting agentXRetries 0 in
snmpd.conffile I had given following command from command line
snmpset -c gss localhost:161 .1.3.6.1.4.1.303.3.3.9.35.5.2.1.1.0 i 17
I had restarted the agent in debug mode it is showing following packet. It
is showing that two SET request has been sent to sub-agent(Might be I am
wrong). Seems that client is sending the request two times but if I give
command "snmpset -r 0 ...." then it gives timeout error. And replacing the
0 with 1 it is sending the request to master agent two time and getting the
response. Is there any way to avoid the multiple request sent by client to
master agent in net-snmp because my client would be some third party client
like "emanate" snmp client
Received SNMP packet(s) from UDP: [127.0.0.1]:36620
SET message
-- SNMPv2-SMI::enterprises.303.3.3.9.35.5.2.1.1.0
Sending 76 bytes to TCP: [127.0.0.1]:57381
0000: 01 08 00 00 07 00 00 00 56 00 00 00 57 00 00 00 ........V...W...
0016: 38 00 00 00 02 00 00 00 0B 04 00 00 01 00 00 00 8...............
0032: 2F 01 00 00 03 00 00 00 03 00 00 00 09 00 00 00 /...............
0048: 23 00 00 00 05 00 00 00 02 00 00 00 01 00 00 00 #...............
0064: 01 00 00 00 00 00 00 00 11 00 00 00 ............
Received 28 bytes from TCP: [127.0.0.1]:57381
0000: 01 12 00 00 07 00 00 00 56 00 00 00 57 00 00 00 ........V...W...
0016: 08 00 00 00 00 00 00 00 00 00 00 00 ............
Sending 20 bytes to TCP: [127.0.0.1]:57381
0000: 01 09 00 00 07 00 00 00 56 00 00 00 58 00 00 00 ........V...X...
0016: 00 00 00 00 ....
Received 49 bytes from UDP: [127.0.0.1]:36620
0000: 30 2F 02 01 00 04 03 67 73 73 A3 25 02 04 40 15 0/.....gss.%..@.
0016: D4 79 02 01 00 02 01 00 30 17 30 15 06 10 2B 06 .y......0.0...+.
0032: 01 04 01 82 2F 03 03 09 23 05 02 01 01 00 02 01 ..../...#.......
0048: *11* .
Received SNMP packet(s) from UDP: [127.0.0.1]:36620
SET message
-- SNMPv2-SMI::enterprises.303.3.3.9.35.5.2.1.1.0
Received 28 bytes from TCP: [127.0.0.1]:57381
0000: 01 12 00 00 07 00 00 00 56 00 00 00 58 00 00 00 ........V...X...
0016: 08 00 00 00 00 00 00 00 00 00 00 00 ............
Sending 20 bytes to TCP: [127.0.0.1]:57381
0000: 01 0B 00 00 07 00 00 00 56 00 00 00 5A 00 00 00 ........V...Z...
0016: 00 00 00 00 ....
Sending 49 bytes to UDP: [127.0.0.1]:36620
0000: 30 2F 02 01 00 04 03 67 73 73 A2 25 02 04 40 15 0/.....gss.%..@.
0016: D4 79 02 01 00 02 01 00 30 17 30 15 06 10 2B 06 .y......0.0...+.
0032: 01 04 01 82 2F 03 03 09 23 05 02 01 01 00 02 01 ..../...#.......
0048: *11* .
Sending 76 bytes to TCP: [127.0.0.1]:57381
0000: 01 08 00 00 07 00 00 00 59 00 00 00 5B 00 00 00 ........Y...[...
0016: 38 00 00 00 02 00 00 00 0B 04 00 00 01 00 00 00 8...............
0032: 2F 01 00 00 03 00 00 00 03 00 00 00 09 00 00 00 /...............
0048: 23 00 00 00 05 00 00 00 02 00 00 00 01 00 00 00 #...............
0064: 01 00 00 00 00 00 00 00 11 00 00 00 ............
Received 28 bytes from TCP: [127.0.0.1]:57381
0000: 01 12 00 00 07 00 00 00 56 00 00 00 5A 00 00 00 ........V...Z...
0016: 08 00 00 00 00 00 00 00 00 00 00 00 ............
Received 28 bytes from TCP: [127.0.0.1]:57381
0000: 01 12 00 00 07 00 00 00 59 00 00 00 5B 00 00 00 ........Y...[...
0016: 08 00 00 00 00 00 00 00 00 00 00 00 ............
Sending 20 bytes to TCP: [127.0.0.1]:57381
0000: 01 09 00 00 07 00 00 00 59 00 00 00 5C 00 00 00 ........Y...\...
0016: 00 00 00 00 ....
Received 28 bytes from TCP: [127.0.0.1]:57381
0000: 01 12 00 00 07 00 00 00 59 00 00 00 5C 00 00 00 ........Y...\...
0016: 08 00 00 00 00 00 00 00 00 00 00 00 ............
Sending 20 bytes to TCP: [127.0.0.1]:57381
0000: 01 0B 00 00 07 00 00 00 59 00 00 00 5D 00 00 00 ........Y...]...
0016: 00 00 00 00 ....
Sending 49 bytes to UDP: [127.0.0.1]:36620
0000: 30 2F 02 01 00 04 03 67 73 73 A2 25 02 04 40 15 0/.....gss.%..@.
0016: D4 79 02 01 00 02 01 00 30 17 30 15 06 10 2B 06 .y......0.0...+.
0032: 01 04 01 82 2F 03 03 09 23 05 02 01 01 00 02 01 ..../...#.......
0048: 11 .
Received 28 bytes from TCP: [127.0.0.1]:57381
0000: 01 12 00 00 07 00 00 00 59 00 00 00 5D 00 00 00 ........Y...]...
0016: 08 00 00 00 00 00 00 00 00 00 00 00 ............
Received 20 bytes from TCP: [127.0.0.1]:57381
0000: 01 0D 00 00 07 00 00 00 00 00 00 00 0E CF ED 2E ................
0016: 00 00 00 00 ....
Sending 28 bytes to TCP: [127.0.0.1]:57381
0000: 01 12 00 00 07 00 00 00 00 00 00 00 0E CF ED 2E ................
0016: 08 00 00 00 DC 0B 01 00 00 00 00 00 ............
Received 20 bytes from TCP: [127.0.0.1]:57381
0000: 01 0D 00 00 07 00 00 00 00 00 00 00 0F CF ED 2E ................
0016: 00 00 00 00 ....
Sending 28 bytes to TCP: [127.0.0.1]:57381
0000: 01 12 00 00 07 00 00 00 00 00 00 00 0F CF ED 2E ................
0016: 08 00 00 00 B8 11 01 00 00 00 00 00
Thanks
Awadhesh.
On Jan 16, 2008 3:15 PM, Dave Shield <[email protected]> wrote:
> On 16/01/2008, Awadhesh Kumar <[email protected]> wrote:
> > I have mib module object which has type READ/WRITE. If I do snmp set
> request
> > then it apply the information in the database and apply it also on
> device.
> > So it takes some time and then in result master agent send the same SET
> > request again. I have added
> > agentXRetries 1
>
> Try with "agentXRetries 0"
>
> > agentXTimeout 1200
> >
> > in /usr/local/share/snmp/snmpd.conf file but seems that
> > master agent is not understanding the configuration because It is again
> > sending the same SET request multiple time to my sub-agent application.
>
> Is it the master agent which is resending the request, or is it the
> original "snmpset" command?
>
> Try running the command with the -d option.
> This will display raw packet dumps for the requests and responses.
>
> Also try running "snmpset -r 0 ...." to turn off client-side retries.
>
> Dave
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users