Re: SMUX problem and FreeRADIUS and x86_64

Taymour A. El Erian wrote:
> Thomas Anders wrote:
>   
>> Taymour A. El Erian wrote:
>>   
>>     
>>>  I have a running setup on RHEL 3, FreeRADIUS 1.1.7 and Net-SNMP 5.0.9 
>>> on  i386 and I can monitor RADIUS correctly. I have created the same 
>>> setup on RHEL 5.1, FreeRADIUS 1.1.7, Net-SNMP 5.3 on x86_64 and 
>>> FreeRADIUS can not connect to SNMP (connection refused). I have tried 
>>> building Net-SNMP 5.4 and still the same problem.
>>>     
>>>       
>> Please try 5.4.1 which should work fine with FreeRADIUS as a SMUX subagent.
>> If it doesn't, what are the exact configuration settings and error messages on both sides?
>>
>>
>> +Thomas
>>
>>   
>>     
> I tried 5.4.1 before sending the email (sorry I forgot to say it is 
> 5.4.1). I built it from the source (using your spec file) on RHEL 5.1 
> x86_64. It still does not work.
>
> here is the output of radiusd -x
>
> module: Instantiated radutmp (radutmp)
>  main: smux_password = "password"
>  main: snmp_write_access = no
> SMUX connect try 1
> SMUX open oid: 1.3.6.1.4.1.3317.1.3.1
> SMUX open progname: radiusd
> SMUX open password: password
> SMUX register oid: 1.3.6.1.2.1.67.1.1.1.1
> SMUX register priority: -1
> SMUX register operation: 1
> SMUX register oid: 1.3.6.1.2.1.67.2.1.1.1
> SMUX register priority: -1
> SMUX register operation: 1
> SMUX register message send failed: Connection reset by peer
>
> snmp.conf
> smux_password = password
>
> snmpd.conf
>
> smuxpeer .1.3.6.1.4.1.3317.1.3.1 password
>
>   
one more thing I forgot to say that I had to add 
--enable-ucd-snmp-compatibility while compiling otherwise freeradius 
does not see snmp available during compilation

-- 
Taymour A El Erian
System Division Manager
RHCE, LPIC, CCNA, MCSE, CNA
TE Data
E-mail: [email protected]
Web:     www.tedata.net
Tel:    +(202)-33320700
Fax:	+(202)-33320800
Ext:    1101



-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users