smux issue...

Hi all, I've been trying to establish smux comunication between netsmnp and
quagga in order to get rip2 mib data. I already compiled quagga with enable
snmp option, configure both snmpd.conf and ripd.conf, but still can't make
it work. Here's my snmpd smux configuration:

#
-----------------------------------------------------------------------------
## the following line is relevant for Quagga            #
smuxpeer .1.3.6.1.4.1.3317.1.2.3 quagga_ripd

and here's is what the log portion for smux

smux_conf: parsing registration for: .1.3.6.1.4.1.3317.1.2.3 quagga_ripd
smux_conf: password is: quagga_ripd
mib_init: initializing: smux
smux_init: [smux_init] done; smux listen sd is 11, smux port is 199
NET-SNMP version 5.2.3
smux: [smux_accept] Calling accept()
[smux_accept] accepted fd 13 from 127.0.0.1:38434
smux: [smux_open_process] version 0, len 40, type 2
smux: [smux_open_process] smux peer: SNMPv2-SMI::enterprises.3317.1.2.3
smux: [smux_open_process] len 28, type 6
smux: [smux_open_process] smux peer descr: Quagga-0.99.5
smux: [smux_open_process] len 13, type 4
smux: [smux_open_process] smux peer passwd: quagga_ripd
smux: [smux_open_process] len 0, type 4
refused smux peer: oid SNMPv2-SMI::enterprises.3317.1.2.3, descr
Quagga-0.99.5
smux: [smux_close] sending close to fd 13, reason 5
smux: [smux_accept] peer on 13 failed authentication
smux: [smux_accept] Calling accept()
[smux_accept] accepted fd 13 from 127.0.0.1:38451
smux: [smux_open_process] version 0, len 40, type 2
smux: [smux_open_process] smux peer: SNMPv2-SMI::enterprises.3317.1.2.3
smux: [smux_open_process] len 28, type 6
smux: [smux_open_process] smux peer descr: Quagga-0.99.5
smux: [smux_open_process] len 13, type 4
smux: [smux_open_process] smux peer passwd: quagga_ripd
smux: [smux_open_process] len 0, type 4
refused smux peer: oid SNMPv2-SMI::enterprises.3317.1.2.3, descr
Quagga-0.99.5
smux: [smux_close] sending close to fd 13, reason 5
smux: [smux_accept] peer on 13 failed authentication


I don't know if I need them but I copy the GNOME-PRODUCT-ZEBRA-MIB.txt mib
to the snmp default mibs directory. Does anybody know what else I need to do
to make it work???

Thanks in advance,

Alejandro Islas

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users