After integrated files(uit.c uit.h) of my private sub-agent, the snmpd routine auto termination problem

"Alexander King" <[email protected]> Wed, 20 Jan 2010 15:44:34 +0800

Newsgroups	gmane.network.net-snmp.user
Message-ID	<[email protected]>

Dave and all:
  
 1.I defined my private mib file(several scalars,one table,several traps) UIT-NOTIFICATION-MIB.txt,and use the tool mib2c.scalar.conf,mib2c.notifyl.scalar.conf,and mib2c.iterate.conf,and integrated the three files into one and modified.
  
 2.I put the mib file here:net-snmp-5.4.2.1/mibs/;the uit.c and uit.h here:net-snmp-5.4.2.1/agent/mibgroup/;the snmpd.conf is here: /usr/local/share/snmp/mibs/;the snmptrapd.conf here:/usr/local/share/snmp/
  
 3.I use the command  './configure --with-mib-modules="uit" '; ' make ' and ' make install ' re-complie and install the net-snmp program in CLI. 
  
 4. I use '/use/local/sbin/snmpd -C -c /usr/local/share/snmp/mibs/snmpd.conf ' and ' /usr/local/sbin/snmptrapd -C -c /usr/local/share/snmp/snmptrapd.conf ' to strat the snmpd and snmptrapd routine,but the snmpd routine always auto termination itself.
  
 if I donot integrate my private files,they work very well.So,it is must be something wrong with my files,but I am not familar with the generated codes by the net-snmp tools.I really need somebody come help me to test the files.
  
 the attachments are they files.I got permission from my company they are all freely for your uses.
  
 Thank you all.
  
 Alex

------------------------------------------------------------------------------
Throughout its 18-year history, RSA Conference consistently attracts the
world's best and brightest in the field, creating opportunities for Conference
attendees to learn about information security's most important issues through
interactions with peers, luminaries and emerging and established companies.
http://p.sf.net/sfu/rsaconf-dev2dev

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users

uit.h (application/octet-stream, 2.1 KB)

/*
 * Note: this file originally auto-generated by mib2c using
 *        : mib2c.scalar.conf 11805 2005-01-07 09:37:18Z dts12 $
 */
#ifndef UIT_H
#define UIT_H

/* function declarations */
void init_uit(void);
Netsnmp_Node_Handler handle_uitProductsName;
Netsnmp_Node_Handler handle_systemNumber;
Netsnmp_Node_Handler handle_systemSerialNumber;
Netsnmp_Node_Handler handle_systemType;
Netsnmp_Node_Handler handle_systemStatus;
Netsnmp_Node_Handler handle_systemJBODNumber;

/* #endif UIT_H */

/****************************Integrated by CHENYAPU*****************************************/ 


/*
 * Note: this file originally auto-generated by mib2c using
 *  : mib2c.iterate.conf 15999 2007-03-25 22:32:02Z dts12 $
 */
/*
#ifndef UIT_H
#define UIT_H
*/
/* function declarations */
/* void init_uit(void);  */
void initialize_table_hostInterfaceFCTable(void);
Netsnmp_Node_Handler hostInterfaceFCTable_handler;
Netsnmp_First_Data_Point  hostInterfaceFCTable_get_first_data_point;
Netsnmp_Next_Data_Point   hostInterfaceFCTable_get_next_data_point;

/* column number definitions for table hostInterfaceFCTable */
       #define COLUMN_FCPORT		1
       #define COLUMN_FCSTATUS		2
       #define COLUMN_FCWWN		3
       #define COLUMN_FCSPEED		4
       #define COLUMN_FCTOPOLOGY		5
       #define COLUMN_FCCONNECTIONS		6
/* #endif  UIT_H   */


/****************************Integrated by CHENYAPU*****************************************/ 


/*
 * Note: this file originally auto-generated by mib2c using
 *        : mib2c.notify.conf 10110 2004-04-15 12:29:19Z dts12 $
 */
/*

#ifndef UIT_H
#define UIT_H

*/
/* function declarations */
int send_systemNumbertrap_trap(void);
int send_systemSerialNumbertrap_trap(void);
int send_systemTypetrap_trap(void);
int send_systemStatustrap_trap(void);
int send_systemJBODNumbertrap_trap(void);
int send_fcPorttrap_trap(void);
int send_fcStatustrap_trap(void);
int send_fcWWNtrap_trap(void);
int send_fcSpeedtrap_trap(void);
int send_fcTopologytrap_trap(void);
int send_fcConnectionstrap_trap(void);

#endif /* UIT_H */

snmptrapd.conf (application/octet-stream, 5.4 KB)

#ÅäÖÃsnmptrapd.conf

#½¨Á¢/usr/share/snmp/snmptrapd.conf£¨ÎÒµÄ»úÆ÷ÉÏÊÇÕâ¸ö£¬²»Í¬»úÆ÷²»Í¬£¬¿ÉÄÜÓÐµÄ·ÅÔÚ/etc/snmp,/usr/local/share/snmp/ÏÂ£¬ÊÓ²»Í¬Çé¿öÂýÂýÊµÑé£©£¬¼ÓÈëÒÔÏÂÒ»ÐÐ:

authcommunity execute,log,net  public
#ÉèÖÃËùÓÐÓÃ»§µÄ·ÃÎÊÈ¨ÏÞ£º¿ÉÖ´ÐÐ£¬¼ÇÂ¼£¬´«µÝ£¬

#Èç¹ûÏà¶Ô½ÓÊÜµ½µÄÐÅÏ¢´¦Àí¿ÉÒÔÔö¼Ó:

# traphandle .1.3.6.1.4.1.2021.251.2  page_me down
# Ä¬ÈÏ´¦Àíº¯Êý
# traphandle .1.3.6.1.4.1.30901.2090.7000   /home/net-snmp/traphandle.pl  
traphandle   default   log_it  

##log_itagent×Ô¶¯²úÉútrap ÅäÖÃagentµÄsnmpd.conf£¬¼ÓÈëÒÔÏÂ¼¸ÐÐ£º(²Î¿¼:
#http://www.net-snmp.org/wiki/index.php/FAQ:Agent_17 ):

# From: http://www.net-snmp.org/wiki/index.php/FAQ:Agent_17
# send v1 traps
#trapsink   127.0.0.1:162
# also send v2 traps
#trap2sink  127.0.0.1:162
#informsink 127.0.0.1:162
#################################################
#
# snmptrapd.conf
#
#   - created by the snmpconf configuration program
#
#################################################
# SECTION: Output formatting for traps received.
#
#   Output from snmptrapd is formatted according to the
#   rules defined by the formatting configuration directives.
# format1: How SNMPv1 traps are formatted.
#   See the snmptrapd.conf manual page for format string details.
#   arguments: formatstring
# format1  "%02.2h:%02.2j Trap %w.%q from %A"
# Èç¹ûÎÒ·¢Ò»¸öv1 trap£¬¾Í»áÔÚlogÀïÃæÖÐ³öÏÖ£º"15:40 Trap 2.0 from 
#dumeifang.example.com.cn"£¬%h¾ÍÊÇµ±Ç°µÄÐ¡Ê±£¬%j¾ÍÊÇµ±Ç°µÄÊ±¼ä£¬%w trap type£¬ÎÒ
#ÓÃµÄÊÇ2£¬%q trap sub-type£¬%A hostname
#·¢trapÊ±ÓÃµÄÃüÁî£ºsnmptrap -v 1 -c public 192.168.99.108 TRAP-TEST-MIB::
#demotraps 192.168.99.108 2 0 '' IF-MIB::ifIndex i 1
#TRAP-TEST-MIBÊÇ×Ô¶¨ÒåµÄMIB

# format2: How SNMPv2 and SNMPv3 traps are formatted.

#   See the snmptrapd.conf manual page for format string details.

#   arguments: formatstring

############################################

# format2  "%02.2h:%02.2j Trap %w.%q from %B"

#Í¬ÑùµÄ£¬ÔÚlogÖÐ»á³öÏÖ£º"15:41 Trap 0.0 from 192.168.99.100(ÕâÊÇÎÒ·¢trapµÄIP)"

#snmptrap -v 2c -c public 192.168.99.108:162 "" .1.3.6.1.4.1.2021.13.990.0.17 

#SNMPv2-MIB::sysLocation.0 s "just here"

#.1.3.6.1.4.1.2021.13.990.0.17 ÊÇ×Ô¶¨ÒåMIBµÄOID

 

#################################################

# SECTION: Trap Handlers

#

#   Here we define what programs are run when a trap is

#   received by the trap receiver.

 

# traphandle: When traps are received, a program can be run.

#   When traps are received, the list of configured trap

#   handles is consulted and any configured program is run.

#   If no handler is found, any handler with "default" as the

#   traphandle type is run instead.  The information contained

#   in trap is passed to the program via standard input (see

#   the snmptrapd.conf manual page for details).

#

#   arguments: oid|"default" program args

# traphandle  SNMPv2-MIB::coldStart  /home/dumf/traps cold

# trapsÊÇÔÚÎÒ×Ô¼ºÓÃ»§Ä¿Â¼ÏÂµÄÒ»¸ö½Å±¾ÎÄ¼þ£¬Ô´´úÂëÊÇÔÚnet-snmp¹ÙÍøÉÏÕÒµÄ¡£

# traphandle .1.3.6.1.4.1.2021.13.990.0.17 echo hello world

# .1.3.6.1.4.1.2021.13.990.0.17 ÊÇÓÃsnmptranslate·Òë³öÀ´µÄ×Ô¶¨ÒåMIB

# traphandle  default echo default handle

#Ä¬ÈÏµÄtraphandle»á´òÓ¡³ö"default handle"


 

 

##################################################

# SECTION: Authentication options

#

#   Authentication options

# arguments: TYPES COMMUNITY [SOURCE [OID | -v VIEW]]

 

# There are currently three types of processing that can be specified, TYPES will be 

# a (comma-separated) list of one or more of these tokens.

# log       log the details of the notification ¨C either in a specified file, to standard 

#           output (or stderr), or via syslog (or similar).

# execute  pass the details of the trap to a specified handler program, including 

#           embedded perl.

# net       forward the trap to another notification receiver

 

# authcommunity execute,log,net public

# This will let snmptrapd process notifications received using the ¡°public¡± 

# community string. Those notifications may be logged, allowed to trigger 

# executable actions, and resend data to the network.

#ÕâÐ©´ó¸ÅµÄÒâË¼¾ÍÊÇTYPES¿ÉÒÔÓÐlog,execute,netÕâÈý¸ö²ÎÊý£¬¿ÉÒÔÖ»ÓÃÒ»¸ö£¬Ò²¿ÉÒÔÍ¨¹ý¶ººÅ

#¸ô¿ªÊ¹ÓÃ¶à¸ö£¬¶øÉÏÃæµÄÄÇ¾äÅäÖÃµÄÒâË¼¾ÍÊÇ£¬Èç¹û-cºóÃæ¼ÓµÄÊÇ"pubilc"µÄ»°£¬¾Í¿ÉÒÔlog£¬¿ÉÒÔ

#Ê¹ÓÃ½Å±¾³ÌÐò£¬¿ÉÒÔ°Ñtrap×ªµ½ÆäËûµÄ½ÓÊÕÕß¡£

 

#################################################

# SECTION: Runtime options

#

#   Runtime options

 

# donotfork: Do not fork from the shell

#   arguments: (1|yes|true|0|no|false)

 

# donotfork  yes

#ÒâË¼¾ÍÊÇËµ£¬snmptrapdÊÇÔÚÇ°Ì¨ÏÂÔËÐÐ£¬¶ø·ÇºóÌ¨£¬Èç¹ûÄãÓÃps -aux|grep snmptrapd

#À´¿´snmptrapdµÄ½ø³ÌÐÅÏ¢µÄ»°£¬¿ÉÒÔ·¢ÏÖTTÄÇÒ»ÐÐÊÇP0Ö®ÀàµÄ£¬¶ø²»ÊÇ??

 

# snmptrapd will run in the foreground other in the background

 

# pidfile: Store Process ID in file
#   arguments: PID file
# pidfile  /tmp/trapdpro.txt
# defines a file in which to store the process ID of the notification receiver. 
# By default, this ID is not saved.
#µ±snmptrapdÆô¶¯Ê±£¬»á°ÑËüµÄPIDÐ´µ½trapdpro.txtÎÄ¼þÀï£¬Èç¹ûÃ»ÓÐÕâ¸öÎÄ¼þ£¬»áÐÂ½¨Ò»¸öÔÙ
#Ð´Èë
##########################################################
# SECTION: Logging options
#
#   Logging options

# logoption: Set options controlling where to log to
#   See -L options in the snmptrapd.conf man page

# logoption f /var/snmptrapd.log
#¾ÍÕâ¾ä»¹Ã»ÑéÖ¤³É¹¦£¬²»¹ýÊÔ¹ýÓÃ-LfÖ®ÀàµÄ£¬µ«ÊÇ»á±¨´í£º
#Unknown logging option passed to -L: ".
#¸ù¾ÝÕâ¾ä»°µÄÒâË¼£¬¸Ð¾õ²»ÓÃ¼Ó-LÒ²²»ÄÜÓÃ""£¬µ«ÊÇÓÃÕâ¾ä»°£¬ËüÒ²²»»áÔÚÖ¸¶¨Î»ÖÃÉÏ½¨Á¢Ö¸¶¨µÄlogÎÄ¼þ
##±¾ÎÄÀ´×ÔCSDN²©¿Í£¬×ªÔØÇë±êÃ÷³ö´¦£ºhttp://blog.csdn.net/dumeifang/archive/2009/05/19/4201860.aspx

snmpd.conf (application/octet-stream, 16.8 KB)

###############################################################################
#
# EXAMPLE.conf:
#   An example configuration file for configuring the ucd-snmp snmpd agent.
#
###############################################################################
#
# This file is intended to only be an example.  If, however, you want
# to use it, it should be placed in /usr/local/etc/snmp/snmpd.conf.
# When the snmpd agent starts up, this is where it will look for it.
#
# You might be interested in generating your own snmpd.conf file using
# the "snmpconf" program (perl script) instead.  It's a nice menu
# based interface to writing well commented configuration files.  Try it!
#
# Note: This file is automatically generated from EXAMPLE.conf.def.
# Do NOT read the EXAMPLE.conf.def file! Instead, after you have run
# configure & make, and then make sure you read the EXAMPLE.conf file
# instead, as it will tailor itself to your configuration.

# All lines beginning with a '#' are comments and are intended for you
# to read.  All other lines are configuration commands for the agent.

#
# PLEASE: read the snmpd.conf(5) manual page as well!
#


###############################################################################
# Access Control
###############################################################################

# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY
# KNOWN AT YOUR SITE.  YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO
# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE.

# By far, the most common question I get about the agent is "why won't
# it work?", when really it should be "how do I configure the agent to
# allow me to access it?"
#
# By default, the agent responds to the "public" community for read
# only access, if run out of the box without any configuration file in 
# place.  The following examples show you other ways of configuring
# the agent so that you can change the community names, and give
# yourself write access as well.
#
# The following lines change the access permissions of the agent so
# that the COMMUNITY string provides read-only access to your entire
# NETWORK (EG: 10.10.10.0/24), and read/write access to only the
# localhost (127.0.0.1, not its real ipaddress).
#
# For more information, read the FAQ as well as the snmpd.conf(5)
# manual page.

####
# First, map the community name (COMMUNITY) into a security name
# (local and mynetwork, depending on where the request is coming
# from):

#       sec.name  source          community
com2sec local     localhost       public
com2sec mynetwork NETWORK/24      COMMUNITY
com2sec local     192.168.80.133  public
com2sec local     192.168.80.139  public
com2sec local     172.19.50.59    public
com2sec local     172.19.60.135   public 
com2sec local     172.19.50.74    public
com2sec local     172.19.50.73    public 
com2sec local     172.19.50.43    public
com2sec local     172.19.50.12    public
com2sec local     172.19.50.11    public
com2sec local     172.19.0.0/16   public
com2sec local     172.19.30.0/24  public
com2sec local     172.19.50.0/24  public
com2sec mynetwork 172.19.50.0/24  public
com2sec local     192.168.80.0/24 public
###########################################
# From: http://www.net-snmp.org/wiki/index.php/FAQ:Agent_17
# send v1 traps
# trapsink  127.0.0.1:162  public
trapsink  172.19.50.12:162  public

trapsink  172.19.50.74:162  public

trapsink  172.19.50.17:162  public


#  also send v2 traps and informs
# trap2sink 127.0.0.1:162 public
trap2sink 172.19.50.12:162   public

trap2sink 172.19.50.74:162   public

trap2sink 172.19.50.17:162   public
#
# trap sink:localhost
# trap community:public
# snmpEnableAuthenTraps:enabled
# trap2sink 172.19.50.12:162  public
#send traps on authentication failures
# authtrapenable 1
informsink 172.19.50.12:162
##SNMPv3 destinations can be configured using the directive
##'trapsess'.See the 'snmpd.conf(5)'man page for details.
## Added 2010.01.06 for Trap test prototype 
#############################################

####
# Second, map the security names into group names:
#             	sec.model  sec.name
group MyRWGroup	v1         local
group MyRWGroup	v2c        local
group MyRWGroup	usm        local
group MyROGroup v1         mynetwork
group MyROGroup v2c        mynetwork
group MyROGroup usm        mynetwork

####
# Third, create a view for us to let the groups have rights to:

#           incl/excl subtree                          mask
view all    included  .1                               80

####
# Finally, grant the 2 groups access to the 1 view with different
# write permissions:

#                context sec.model sec.level match  read   write  notif
access MyROGroup ""      any       noauth    exact  all    none   none
access MyRWGroup ""      any       noauth    exact  all    all    none

# -----------------------------------------------------------------------------


###############################################################################
# System contact information
#

# It is also possible to set the sysContact and sysLocation system
# variables through the snmpd.conf file.  **PLEASE NOTE** that setting
# the value of these objects here makes these objects READ-ONLY
# (regardless of any access control settings).  Any attempt to set the
# value of an object whose value is given here will fail with an error
# status of notWritable.

syslocation 8=) Shenzhen,P.R.China.
syscontact  :=) Alexander Chen <[email protected]>

# Example output of snmpwalk:
#   % snmpwalk -v 1 -c public localhost system
#   system.sysDescr.0 = "SunOS name sun4c"
#   system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4
#   system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55
#   system.sysContact.0 = "Me <[email protected]>"
#   system.sysName.0 = "name"
#   system.sysLocation.0 = "Right here, right now."
#   system.sysServices.0 = 72


# -----------------------------------------------------------------------------


###############################################################################
# Process checks.
#
#  The following are examples of how to use the agent to check for
#  processes running on the host.  The syntax looks something like:
#
#  proc NAME [MAX=0] [MIN=0]
#
#  NAME:  the name of the process to check for.  It must match
#         exactly (ie, http will not find httpd processes).
#  MAX:   the maximum number allowed to be running.  Defaults to 0.
#  MIN:   the minimum number to be running.  Defaults to 0.

#
#  Examples:
#

#  Make sure mountd is running
proc mountd

#  Make sure there are no more than 4 ntalkds running, but 0 is ok too.
proc ntalkd 4

#  Make sure at least one sendmail, but less than or equal to 10 are running.
proc sendmail 10 1

#  A snmpwalk of the prTable would look something like this:
# 
# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.2
# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1
# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2
# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3
# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd"
# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd"
# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail"
# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0
# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0
# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1
# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0
# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4
# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10
# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0
# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0
# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0
# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running."
# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = ""
# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = ""
# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0
# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0
# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0
#
#  Note that the errorFlag for mountd is set to 1 because one is not
#  running (in this case an rpc.mountd is, but thats not good enough),
#  and the ErrMessage tells you what's wrong.  The configuration
#  imposed in the snmpd.conf file is also shown.  
# 
#  Special Case:  When the min and max numbers are both 0, it assumes
#  you want a max of infinity and a min of 1.
#


# -----------------------------------------------------------------------------


###############################################################################
# Executables/scripts
#

#
#  You can also have programs run by the agent that return a single
#  line of output and an exit code.  Here are two examples.
#
#  exec NAME PROGRAM [ARGS ...]
#
#  NAME:     A generic name.
#  PROGRAM:  The program to run.  Include the path!
#  ARGS:     optional arguments to be passed to the program

# a simple hello world
exec echotest /bin/echo hello world

# Run a shell script containing:
#
# #!/bin/sh
# echo hello world
# echo hi there
# exit 35
#
# Note:  this has been specifically commented out to prevent
# accidental security holes due to someone else on your system writing
# a /tmp/shtest before you do.  Uncomment to use it.
#
#exec shelltest /bin/sh /tmp/shtest

# Then, 
# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.8
# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1
# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2
# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest"
# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest"
# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world"
# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest"
# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0
# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35
# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world."
# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world."
# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0
# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0

# Note that the second line of the /tmp/shtest shell script is cut
# off.  Also note that the exit status of 35 was returned.

# -----------------------------------------------------------------------------


###############################################################################
# disk checks
#

# The agent can check the amount of available disk space, and make
# sure it is above a set limit.  

# disk PATH [MIN=DEFDISKMINIMUMSPACE]
#
# PATH:  mount path to the disk in question.
# MIN:   Disks with space below this value will have the Mib's errorFlag set.
#        Default value = DEFDISKMINIMUMSPACE.

# Check the / partition and make sure it contains at least 10 megs.

disk / 1000000000
disk /usr/local  2500000

# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.9
# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0
# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F 
# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0"
# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000
# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130
# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325
# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092
# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58
# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0
# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = ""

# -----------------------------------------------------------------------------


###############################################################################
# load average checks
#

# load [1MAX=DEFMAXLOADAVE] [5MAX=DEFMAXLOADAVE] [15MAX=DEFMAXLOADAVE]
#
# 1MAX:   If the 1 minute load average is above this limit at query
#         time, the errorFlag will be set.
# 5MAX:   Similar, but for 5 min average.
# 15MAX:  Similar, but for 15 min average.

# Check for loads:
load 12 14 14

# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.10
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1"
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5"
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15"
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39 
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31 
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36 
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00"
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00"
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00"
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = ""
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = ""
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = ""

# -----------------------------------------------------------------------------


###############################################################################
# Extensible sections.
# 

# This alleviates the multiple line output problem found in the
# previous executable mib by placing each mib in its own mib table:

# Run a shell script containing:
#
# #!/bin/sh
# echo hello world
# echo hi there
# exit 35
#
# Note:  this has been specifically commented out to prevent
# accidental security holes due to someone else on your system writing
# a /tmp/shtest before you do.  Uncomment to use it.
#
# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest

# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.50
# enterprises.ucdavis.50.1.1 = 1
# enterprises.ucdavis.50.2.1 = "shelltest"
# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest"
# enterprises.ucdavis.50.100.1 = 35
# enterprises.ucdavis.50.101.1 = "hello world."
# enterprises.ucdavis.50.101.2 = "hi there."
# enterprises.ucdavis.50.102.1 = 0

# Now the Output has grown to two lines, and we can see the 'hi
# there.' output as the second line from our shell script.
#
# Note that you must alter the mib.txt file to be correct if you want
# the .50.* outputs above to change to reasonable text descriptions.

# Other ideas:
# 
# exec .1.3.6.1.4.1.2021.51 ps /bin/ps 
# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top
# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq

# -----------------------------------------------------------------------------


###############################################################################
# Pass through control.
# 

# Usage:
#   pass MIBOID EXEC-COMMAND
#
# This will pass total control of the mib underneath the MIBOID
# portion of the mib to the EXEC-COMMAND.  
#
# Note:  You'll have to change the path of the passtest script to your
# source directory or install it in the given location.
# 
# Example:  (see the script for details)
#           (commented out here since it requires that you place the
#           script in the right location. (its not installed by default))

# pass .1.3.6.1.4.1.2021.255 /bin/sh PREFIX/local/passtest

# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.255
# enterprises.ucdavis.255.1 = "life the universe and everything"
# enterprises.ucdavis.255.2.1 = 42
# enterprises.ucdavis.255.2.2 = OID: 42.42.42
# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42
# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1
# enterprises.ucdavis.255.5 = 42
# enterprises.ucdavis.255.6 = Gauge: 42
#
# % snmpget -v 1 -c public localhost .1.3.6.1.4.1.2021.255.5
# enterprises.ucdavis.255.5 = 42
#
# % snmpset -v 1 -c public localhost .1.3.6.1.4.1.2021.255.1 s "New string"
# enterprises.ucdavis.255.1 = "New string"
#

# For specific usage information, see the man/snmpd.conf.5 manual page
# as well as the local/passtest script used in the above example.

###############################################################################
# Subagent control
#

# The agent can support subagents using a number of extension mechanisms.
# From the 4.2.1 release, AgentX support is being compiled in by default.
# To use this mechanism, simply uncomment the following directive.
#
 master  agentx
#
#   Please see the file README.agentx for more details.
#


###############################################################################
# Further Information
#
#  See the snmpd.conf manual page, and the output of "snmpd -H".
#  MUCH more can be done with the snmpd.conf than is shown as an
#  example here.

mibs +ALL

dlmod   uit  /usr/local/share/snmp/mibs/
mibs         /usr/local/share/snmp/mibs/

UIT-NOTIFICATION-MIB.txt (application/octet-stream, 11 KB)

-------------------------------------------------------------------------------

-- COPYRIGHT (C) 2008,2009,2010 ALL RIGHTS RESERVED BY UIT(SHENZHEN) CO.,LTD.

--

-- UIT SV7000 STORAGE MANAGEMENT INFORMATION BASE(MIB) DESCRIPTION

-- Module name:sv7000-mib-gui.mib

-- Abstract:

--         Define the uit sv7000 manager snmp interface       

-- AUTHORS:

--         Alexander Chen et al.

-- Revision History:

--    Alex 11/12/2009 0.1 Original draft,define MIB file from GUI (Got orders

--	                      from Gaowenqiang and Luoxiqing)

--    Alex 28/12/2009 0.2 Some modifications in syntax uses. 

--    Alex 10/01/2010 0.3 smi snmpv1 TRAP-TYPE changed into smi snmpv2 NOTIFICATION-TRAP 

--    Alex  //2009 0.4 

--	  Alex  //2009 0.5 

--					 	  

--   

-------------------------------------------------------------------------------

UIT-NOTIFICATION-MIB DEFINITIONS ::= BEGIN



	IMPORTS

        DisplayString 

			FROM RFC1213-MIB

        TruthValue,

        RowPointer,

        TimeStamp,

        PhysAddress,

        MacAddress,

        TEXTUAL-CONVENTION,

        DateAndTime,

        RowStatus,

        AutonomousType

                FROM SNMPv2-TC

        Integer32,

        Unsigned32,

        OBJECT-TYPE,

        OBJECT-IDENTITY,

        MODULE-IDENTITY,

        enterprises,

        IpAddress,

        NOTIFICATION-TYPE,

        TimeTicks,

        Counter32,

        Counter64

                FROM SNMPv2-SMI

        OBJECT-GROUP, 

        NOTIFICATION-GROUP

                FROM SNMPv2-CONF;                  

-------------------------------------------------------------------------------

--   MODULE IDENTITY : uit

-------------------------------------------------------------------------------



uit MODULE-IDENTITY

        LAST-UPDATED "200910150000Z"

        ORGANIZATION "United Information Technology Co.,Ltd."

        CONTACT-INFO

                     "United Information Technology Co.,Ltd.

                      5/F, 9 Building, Software Park

                      No.2 Tech Middle Road, High-Tech Industrial Park,

                      Shenzhen City,Guangdong Province

                      518057,China

                      Tel: +86 (755) 2699 3377

                      Fax: +86 (755) 2699 3387

                      http://www.uit.com.cn

                      E-mail: [email protected],[email protected]"

        DESCRIPTION

                     "MIB Definition used in the UIT Technologies Limited for

                      iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).uit(30901)"

        REVISION     "201001101800Z"

                     -- Format is "YYYYMMDDhhmmZ"

        DESCRIPTION

                     "

                      UIT-NOTIFICATION-MIB - UNM Testing prototype release 0.3

                     "

        ::= { enterprises 30901 }





uitProducts         OBJECT-IDENTITY				--It is the first sorting procedure,pick a unique number 2090,

    	STATUS       current                    --Pray it not been used,and will not use by others.

    	DESCRIPTION

        			 "uitProducts is the root OBJECT IDENTIFIER from

        			  which sysObjectID values are assigned.  Actual

        			  values are defined in uit-PRODUCTS-MIB."

    	::= { uit 2090 }                        --

uitProductsSeries   OBJECT-IDENTITY 			--sv7000 series products, so we use number 7000.

    	STATUS       current

    	DESCRIPTION

        			 "uitProducts is the root OBJECT IDENTIFIER from

        			  which sysObjectID values are assigned.  Actual

        			  values are defined in uit-PRODUCTS-MIB."

    	::= { uitProducts 7000 } 

----    	

    uitProductsName OBJECT-TYPE

        SYNTAX DisplayString( SIZE( 0..256 ) )

        MAX-ACCESS read-only

        STATUS current

        DESCRIPTION

            	"uit Products Series name."

        ::= { uitProductsSeries 1 }  	  

-------------------------------------------------------------------------------		

-------------------------------------------------------------------------------

--uitSV7000 Management Sub-system level 1

-------------------------------------------------------------------------------

uitProductsSystemInfo 		OBJECT IDENTIFIER ::= { uitProductsSeries 2 } 

-------------------------------------------------------------------------------

--uitSV7000 Management Sub-system level 2

-------------------------------------------------------------------------------

systeminfoController 				OBJECT IDENTIFIER ::= { uitProductsSystemInfo 1 }

-------------------------------------------------------------------------------

--uitsv7000 Management Sub-system 

-------------------------------------------------------------------------------

-------------------------------------------------------------------------------

--systeminfoController 			OBJECT IDENTIFIER ::= { uitProductsSystemInfo 1 }

controllerInfo 				OBJECT IDENTIFIER ::= { systeminfoController 1  }

    systemNumber OBJECT-TYPE

        SYNTAX DisplayString( SIZE( 0..256 ) )

        MAX-ACCESS read-only

        STATUS current

        DESCRIPTION

            	"system Number."

        ::= { controllerInfo 1 }

    systemSerialNumber OBJECT-TYPE

        SYNTAX IpAddress

        MAX-ACCESS read-only

        STATUS current

        DESCRIPTION

            	"system Serial Number."

        ::= { controllerInfo 2 }

    systemType OBJECT-TYPE

        SYNTAX PhysAddress

        MAX-ACCESS read-only

        STATUS current

        DESCRIPTION

            	"system Type."

        ::= { controllerInfo 3 }

    systemStatus OBJECT-TYPE

        SYNTAX INTEGER{

      			closed(1),

      			open(2)  		

        	   }

        MAX-ACCESS read-only

        STATUS current

        DESCRIPTION

            	"system Capacity."

        ::= { controllerInfo 4 }

    systemJBODNumber OBJECT-TYPE

        SYNTAX Counter64

        MAX-ACCESS read-only

        STATUS current

        DESCRIPTION

            	"system JBOD Number."

        ::= { controllerInfo 5 }

-------------------------------------------------------------------------------

hostInterface 				OBJECT IDENTIFIER ::= { systeminfoController 2  }

	hostInterfaceFCTable OBJECT-TYPE

		SYNTAX SEQUENCE OF HostInterfaceFCEntry

		MAX-ACCESS read-only

		STATUS current

		DESCRIPTION

				"A table of managed host Interfaces. The number of entries

				is related to number of host Interfaces discovered in the

				system.

				Note: The properties in this table may not be applicable to all entries."

			::= { hostInterface 1 }

	hostInterfaceFCEntry OBJECT-TYPE

		SYNTAX HostInterfaceFCEntry

		MAX-ACCESS read-only

		STATUS current

		DESCRIPTION

				"An entry in the table of hostInterfaceFCs. A row in this table cannot

				be created or deleted by SNMP operations on columns of the table."

		INDEX	{ 

				fcPort

				}

			::= { hostInterfaceFCTable 1 }  

    

    HostInterfaceFCEntry ::=

        SEQUENCE {

        	fcPort

        		DisplayString,

        	fcStatus

        		INTEGER,

        	fcWWN

        		DisplayString,

        	fcSpeed 

        		Counter32,

        	fcTopology

        		Unsigned32,

        	fcConnections

        		INTEGER

        }  

    fcPort OBJECT-TYPE

        SYNTAX DisplayString( SIZE( 0..256 ) )

        MAX-ACCESS read-only

        STATUS current

        DESCRIPTION

            	"fc Port."

        ::= { hostInterfaceFCEntry 1 }        

    fcStatus OBJECT-TYPE

        SYNTAX INTEGER{

      			closed(1),

      			open(2)  		

        	   }

        MAX-ACCESS read-only

        STATUS current

        DESCRIPTION

            	"fc Status."

        ::= { hostInterfaceFCEntry 2 }       

    fcWWN OBJECT-TYPE

        SYNTAX DisplayString( SIZE( 0..256 ) )

        MAX-ACCESS read-only

        STATUS current

        DESCRIPTION

            	"fc WWN."

        ::= { hostInterfaceFCEntry 3 }      

    fcSpeed OBJECT-TYPE

        SYNTAX Counter32

        MAX-ACCESS read-only

        STATUS current

        DESCRIPTION

            	"fc Speed."

        ::= { hostInterfaceFCEntry 4 }      

    fcTopology OBJECT-TYPE

        SYNTAX Unsigned32

        MAX-ACCESS read-only

        STATUS current

        DESCRIPTION

            	"fc Topology."

        ::= { hostInterfaceFCEntry 5 }      

    fcConnections OBJECT-TYPE

        SYNTAX INTEGER

        MAX-ACCESS read-only

        STATUS current

        DESCRIPTION

            	"fc Connections."

        ::= { hostInterfaceFCEntry 6 } 

-------------------------------------------------------------------------------        

--Trap prototype testing here.

-------------------------------------------------------------------------------

 trapTestingTrap1             OBJECT IDENTIFIER ::= { systeminfoController 3  }

 trapTestingTrap2             OBJECT IDENTIFIER ::= { systeminfoController 4  } 



	systemNumbertrap NOTIFICATION-TYPE

        OBJECTS  { systemNumber } 

        STATUS     current

        DESCRIPTION "This is just a demo"

        ::= { trapTestingTrap1 0 1 }

	

	systemSerialNumbertrap NOTIFICATION-TYPE

    	OBJECTS { systemSerialNumber }

    	STATUS     current

    	DESCRIPTION "This is just a demo"

    	::= { trapTestingTrap1  0 2 }



	systemTypetrap NOTIFICATION-TYPE

    	OBJECTS { systemType }                        

    	STATUS     current

    	DESCRIPTION "This is just a demo"

    	::= { trapTestingTrap1  0 3 }



	systemStatustrap NOTIFICATION-TYPE

    	OBJECTS { systemStatus }

    	STATUS     current

    	DESCRIPTION "This is just a demo"

    	::= { trapTestingTrap1  0 4 }   



	systemJBODNumbertrap NOTIFICATION-TYPE

		OBJECTS { systemJBODNumber }

    	STATUS     current

    	DESCRIPTION "This is just a demo"

    	::= { trapTestingTrap1  0 5 }     





    

    fcPorttrap NOTIFICATION-TYPE

        OBJECTS { fcPort } 

        STATUS     current

        DESCRIPTION "Warning:fc port %d was failed!"

        ::= { trapTestingTrap2  0 1 }      

    

    fcStatustrap NOTIFICATION-TYPE

        OBJECTS { fcStatus } 

        STATUS     current

        DESCRIPTION "This is just a demo"

        ::= { trapTestingTrap2  0 2 } 

    

    fcWWNtrap NOTIFICATION-TYPE

        OBJECTS { fcWWN }

        STATUS     current

        DESCRIPTION "This is just a demo"

		::= { trapTestingTrap2  0 3 }

    

    fcSpeedtrap NOTIFICATION-TYPE

        OBJECTS { fcSpeed }  

        STATUS     current

        DESCRIPTION "This is just a demo"

        ::= { trapTestingTrap2  0 4 }   

    

    fcTopologytrap NOTIFICATION-TYPE

        OBJECTS { fcTopology } 

        STATUS     current

        DESCRIPTION "This is just a demo"

        ::= { trapTestingTrap2  0 5 }

    

    fcConnectionstrap NOTIFICATION-TYPE

        OBJECTS { fcConnections }

        STATUS     current

        DESCRIPTION "This is just a demo"

        ::= { trapTestingTrap2  0 6 }            

END

uit.rar (application/octet-stream, 4.4 KB) - not displayed