Re: v2 traps in version v3

Hi Joan,
   Yes : It should be as per requirement, if your requirement tells that 
should  sent v2 traps even though V3 is configured then v2 traps can be 
sent. In our project also we are sending v2 traps when agent is up in V3 
mode.

Regards,
Venki.


Joan Landry wrote:
>
> Does anyone know if when you configure a unit for v3 if the v2 traps 
> under the snmpTargetParamsMPModel = SNMP_VERSION_2 should be sent as 
> version v3 or version v2 in the trapsess cmd.
>
> trapsess -v 2c
>
> or
>
> trapsess -v 3
>
>  
>
> Basically should the fact that my unit is declared to be v3 -- mean 
> that everything sent from my unit is v3, including v2 traps that are 
> configured under the v3/v2 compatibility mode via the 
> snmpTargetAddrTable and snmpTargetParamsMPModel = SNMP_VERSION_2?
>
> Thanks
>
> ------------------------------------------------------------------------
>
> ------------------------------------------------------------------------------
> RSA(R) Conference 2012
> Save $700 by Nov 18
> Register now
> http://p.sf.net/sfu/rsa-sfdev2dev1
> ------------------------------------------------------------------------
>
> _______________________________________________
> Net-snmp-users mailing list
> [email protected]
> Please see the following page to unsubscribe or change other options:
> https://lists.sourceforge.net/lists/listinfo/net-snmp-users
>

------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users