Multi homed host running snmpd

Hi,
I have an machine with a subinterface for eth0, as shown below.  I've the
added
"agentaddress 10.10.1.10" to snmpd.conf file and when i run the agent i get
the
coldStart trap with 192.168.0.2 as the agent address. I was expecting to see
10.10.1.10, is there a way to ensure that it used the ip address on eth0
interface.

I've even tried "/usr/sbin/snmpd -C -c /var/run/snmpd.conf 10.10.1.51" and
i get
Error opening specified endpoint "10.10.1.51"
Server Exiting with code 1

would appreciate any suggestions.

$ifconfig

eth0      Link encap:Ethernet  HWaddr 00:1B:12:00:02:0A
          inet addr:10.10.1.10  Bcast:10.10.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:239685 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1389 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:19226041 (18.3 MiB)  TX bytes:64193 (62.6 KiB)
          Base address:0xa000

eth0:1    Link encap:Ethernet  HWaddr 00:1B:12:00:02:0A
          inet addr:192.168.0.2  Bcast:192.168.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

Thanks
S

------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here 
http://p.sf.net/sfu/sfd2d-msazure

_______________________________________________
Net-snmp-coders mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders