snmptrapd - decoding OIDs not working

I am trying to use net snmp to receive traps from a CISCO network component. It is receiving the traps but is not decoding them correctly

Translate gives me a decoded MIB. Snmptrapd does not.  I have not found a way of getting it to accept the additional Cisco MIBs

snmptrapd.conf
createuser -e 0x800000090300002414C27803 user_v3_priv SHA v3_authpw1 AES v3_encpwd
authuser log user_v3_priv
snmpTrapdAddr udp:200.1.1.100:1162

format2 %V\n% PDU Address: %b \n PDU Hostname: %B \n Date: %0.4y-%0.2m-%0.2l %0.2h:%0.2j:%0.2k \n Enterprise OID: %N \n Trap Type: %w \n Trap Sub-Type: %q \n Community/Infosec Context: %P \n Uptime: %T \n Description: %W \n PDU Attribute/Value Pair Array:\n%v \n -------------- \n

Command Line
c:\usr\bin\snmptrapd -C -c c:\usr\temp\snmptrapd.conf -Lo

Output with no MIBS
PDU Address: UDP: [200.1.1.1]:53778->[0.0.0.0]:0
PDU Hostname: <UNKNOWN>
Date: 2012-03-19 17:08:39
Enterprise OID: .
Trap Type: 0
Trap Sub-Type: 0
Community/Infosec Context: TRAP2, SNMP v3, user user_v3_priv, context
Uptime: 0
Description: Cold Start
PDU Attribute/Value Pair Array:
iso.3.6.1.2.1.1.3.0 = Timeticks: (52281014) 6 days, 1:13:30.14
iso.3.6.1.6.3.1.1.4.1.0 = OID: iso.3.6.1.4.1.9.9.43.2.0.1
iso.3.6.1.4.1.9.9.43.1.1.6.1.3.192 = INTEGER: 1
iso.3.6.1.4.1.9.9.43.1.1.6.1.4.192 = INTEGER: 2
iso.3.6.1.4.1.9.9.43.1.1.6.1.5.192 = INTEGER: 3
--------------
Output using format2 using standard MIBs plus CISCO MIBS
PDU Address: UDP: [200.1.1.1]:53778->[0.0.0.0]:0
PDU Hostname: <UNKNOWN>
Date: 2012-03-19 16:06:28
Enterprise OID: .
Trap Type: 0
Trap Sub-Type: 0
Community/Infosec Context: TRAP2, SNMP v3, user user_v3_priv, context
Uptime: 0
Description: Cold Start
PDU Attribute/Value Pair Array:
DISMAN-EXPRESSION-MIB::sysUpTimeInstance = Timeticks: (51907902) 6 days, 0:11:19
.02
SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::enterprises.9.9.41.2.0.1
SNMPv2-SMI::enterprises.9.9.41.1.2.3.1.2.147 = STRING: "SYS"
SNMPv2-SMI::enterprises.9.9.41.1.2.3.1.3.147 = INTEGER: 6
SNMPv2-SMI::enterprises.9.9.41.1.2.3.1.4.147 = STRING: "CONFIG_I"
SNMPv2-SMI::enterprises.9.9.41.1.2.3.1.5.147 = STRING: "Configured from console
by admin on vty0 (200.1.1.100)"
SNMPv2-SMI::enterprises.9.9.41.1.2.3.1.6.147 = Timeticks: (51907902) 6 days, 0:1
1:19.02
--------------
As far as I can tell I have copied the CISCO MIBs into the correct place and the snmptranslate  utility can translate the OIDs correctly.
C:\usr\bin>snmptranslate 1.3.6.1.4.1.9.9.43.2.0.1
CISCO-CONFIG-MAN-MIB::ciscoConfigManEvent


John Steele
HP Enterprise Services UK Ltd
1-3 Bartley Wood Business Park, Units A & B, Hook, United Kingdom,RG27 9XA

Mobile: +44 7875 876573
Email: [email protected]

HP Enterprise Services UK Ltd registered office: Cain Road, Bracknell, Berks RG12 1HN.  Registered No: 90597 England.

The contents of this message and any attachments to it are confidential and may be legally privileged. If you have received this message in error, you should delete it from your system immediately and advise the sender.  To any recipient of this message within HP, unless otherwise stated you should consider this message and attachments as "HP CONFIDENTIAL".

<http://www.hp.com/>

Please consider the environment before printing this email.

------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here 
http://p.sf.net/sfu/sfd2d-msazure

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users