Re: network interface overruns - how I can get hold of this with snmp?
Per Jessen <[email protected]>
| Newsgroups | gmane.network.net-snmp.user |
|---|---|
| Message-ID | <[email protected]> |
Stuart Kendrick wrote: >> I'm looking for the "overruns:" number as in the ifconfig display: >> >> # ifconfig eth5 >> eth5 Link encap:Ethernet HWaddr 00:02:B3:8D:CF:F6 >> inet addr:212.25.11.138 Bcast:212.25.11.191 >> Mask:255.255.255.192 >> inet6 addr: fe80::202:b3ff:fe8d:cff6/64 Scope:Link >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >> RX packets:2799 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:20 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:1000 >> RX bytes:168911 (164.9 Kb) TX bytes:1697 (1.6 Kb) >> >> >> I'll double check if that is what I get in Discards, thanks. >> > > Ahh, I see. And I don't know the answer. > > If you find out what kind of mapping exists between ifIn/OutDiscards and > dropped and/or overruns, I hope you'll post -- I would find it useful to > know this also > > --sk Well, sofar nothing - as far as I can tell, despite the overrun counter increasing, none of the mib counters are moving: IF-MIB::ifInErrors, IF-MIB::ifOutErrors, IF-MIB::ifInDiscards, IF-MIB::ifOutDiscards. I guess it wouldn't be overly difficult to write an extension, but it seems unlikely that it shouldn't already have been done. /Per ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users