RE: octet strings in 5.4.3~dfsg-2.7

"Juges, Didier" <[email protected]>
Newsgroups gmane.network.net-snmp.user
Message-ID <19CCD8B5903F4544B445C9C999BC9F030119879E8F80@FIS-EXCH-01.corp.cranecoelectronics.com>
I believe all integer values are signed. Not sure that would cause an overflow though.

Didier

From: Joe Dougherty [mailto:[email protected]]
Sent: Wednesday, February 26, 2014 4:14 PM
To: [email protected]
Subject: octet strings in 5.4.3~dfsg-2.7

I have an octet string defined as:
      Uint64Type ::= TEXTUAL-CONVENTION
         DISPLAY-HINT  "8x"
         STATUS        current
         DESCRIPTION   "64 bit unsigned integer"
         SYNTAX        OCTET STRING (SIZE (8))
...
     Preamble OBJECT-TYPE
         SYNTAX      Uint64Type
         MAX-ACCESS  read-write
         STATUS      current
         DESCRIPTION "Preamble"
         ::= {configEntry 15 }

Initial read looks like this:
# snmpget -v2c -c public 192.168.60.11 MY-MIB:Preamble.1
MY-MIB::Preamble.1 = STRING:

I try to set without success:
# snmpset -v2c -c public  192.168.60.11 MY-MIB::Preamble.1 x 1122334455667788
*** buffer overflow detected ***: snmpset terminated

# snmpset -v2c -c public 192.168.60.11 MY-MIB::Preamble.1 x 112233445566778
MY-MIB::Preamble.1: Bad value notation (112233445566778)

# snmpset -v2c -c public 192.168.60.11 MY-MIB::Preamble.1 x 11223344556677
MY-MIB::Preamble.1: Value out of range (Bad string length :: {(8)})

Am running under debian wheezy so would like to stay on 5.4.3 if possible. Am i dorking this up somehow? Any guidance appreciated.
Thanks
Joe

------------------------------------------------------------------------------
Flow-based real-time traffic analytics software. Cisco certified tool.
Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer
Customize your own dashboards, set traffic alerts and generate reports.
Network behavioral analysis & security monitoring. All-in-one tool.
http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.