Re: octet strings in 5.4.3~dfsg-2.7

Fulko Hew <[email protected]>
Newsgroups gmane.network.net-snmp.user
Message-ID <CAGuV3hMJP6Qst976kt4w3eJuDfapjvnaCiYDZbdh-wwBBss=sQ@mail.gmail.com>
On Thu, Feb 27, 2014 at 11:09 AM, Juges, Didier
<[email protected]>wrote:

> I believe all integer values are signed. Not sure that would cause an
> overflow though.
>

 I just tried it on one of my MIBs and it worked:

# snmpset -v1 -cprivate localhost 1.3.6.1.4.1.1978.21.1.7.7.0 x
414243444546474849
SNMPv2-SMI::enterprises.1978.21.1.7.7.0 = STRING: "ABCDEFGHI"

But:
a) my definitions does not use a TEXTUAL-CONVENTION
b) nor do I have a STRING size limit of 8.
c) I didn't specify the variable by name (thereby avoiding snmpset's
   reading/interpreting the MIB file).

Fulko


>
> *From:* Joe Dougherty [mailto:[email protected]]
> *Sent:* Wednesday, February 26, 2014 4:14 PM
> *To:* [email protected]
> *Subject:* octet strings in 5.4.3~dfsg-2.7
>
>
>
> I have an octet string defined as:
>
>       Uint64Type ::= TEXTUAL-CONVENTION
>
>          DISPLAY-HINT  "8x"
>
>          STATUS        current
>
>          DESCRIPTION   "64 bit unsigned integer"
>
>          SYNTAX        OCTET STRING (SIZE (8))
>
> ...
>
>      Preamble OBJECT-TYPE
>
>          SYNTAX      Uint64Type
>
>          MAX-ACCESS  read-write
>
>          STATUS      current
>
>          DESCRIPTION "Preamble"
>
>          ::= {configEntry 15 }
>
>
>
> Initial read looks like this:
>
> # snmpget -v2c -c public 192.168.60.11 MY-MIB:Preamble.1
>
> MY-MIB::Preamble.1 = STRING:
>
>
>
> I try to set without success:
>
> # snmpset -v2c -c public  192.168.60.11 MY-MIB::Preamble.1 x
> 1122334455667788
>
> *** buffer overflow detected ***: snmpset terminated
>
>
>
> # snmpset -v2c -c public 192.168.60.11 MY-MIB::Preamble.1 x 112233445566778
>
> MY-MIB::Preamble.1: Bad value notation (112233445566778)
>
>
>
> # snmpset -v2c -c public 192.168.60.11 MY-MIB::Preamble.1 x 11223344556677
>
> MY-MIB::Preamble.1: Value out of range (Bad string length :: {(8)})
>
>
>
> Am running under debian wheezy so would like to stay on 5.4.3 if possible.
> Am i dorking this up somehow? Any guidance appreciated.
>
> Thanks
>
> Joe
>
>
> ------------------------------------------------------------------------------
> Flow-based real-time traffic analytics software. Cisco certified tool.
> Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer
> Customize your own dashboards, set traffic alerts and generate reports.
> Network behavioral analysis & security monitoring. All-in-one tool.
>
> http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk
> _______________________________________________
> Net-snmp-users mailing list
> [email protected]
> Please see the following page to unsubscribe or change other options:
> https://lists.sourceforge.net/lists/listinfo/net-snmp-users
>
>

------------------------------------------------------------------------------
Flow-based real-time traffic analytics software. Cisco certified tool.
Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer
Customize your own dashboards, set traffic alerts and generate reports.
Network behavioral analysis & security monitoring. All-in-one tool.
http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.