Re: snmpwalk and ipv6 address

Pushpa Thimmaiah <[email protected]>
Newsgroups gmane.network.net-snmp.user
Message-ID <CAASqVJX4+zU1kXyCO3v9R2_E8Z1MXjF92bJsTZmToPeU1HaRrA@mail.gmail.com>
I found similar issue discussed in
http://sourceforge.net/p/net-snmp/mailman/net-snmp-coders/thread/[email protected]/

On Tue, Nov 3, 2015 at 6:05 PM, Pushpa Thimmaiah <[email protected]
> wrote:

> Hi Folks,
>
>  I am using ubuntu and ifconfig eth0 says 'inet6 addr:*
> fe80::3e97:eff:fe8b:f326/64'*
> I have tried snmpwalk with ipv6 ipaddress (mentioned below) and it works
> fine
> snmpwalk -v 2c -c public1 'udp6:[::1]:161'
>
> But snmpwalk fails when  i used fe80::3e97:eff:fe8b:f326
>
> $ snmpwalk -v 2c -c public1 "udp6:[fe80::3e97:eff:fe8b:f326]:161"
> Timeout: No Response from udp6:[fe80::3e97:eff:fe8b:f326]:161
>
> snmpget -v 2c -c public1 udp6:'[*fe80::3e97:eff:fe8b:f326*%eth0]':161
> .1.3.6.1.2.1.1.1.0
> Timeout: No Response from udp6:[fe80::3e97:eff:fe8b:f326%eth0]:161.
>
>
> Details:
> 1. ping works
> $ ping6 -c 5 -I eth0 fe80::3e97:eff:fe8b:f326
> PING fe80::3e97:eff:fe8b:f326(fe80::3e97:eff:fe8b:f326) from
> fe80::3e97:eff:fe8b:f326 eth0: 56 data bytes
> 64 bytes from fe80::3e97:eff:fe8b:f326: icmp_seq=1 ttl=64 time=0.034 ms
> 64 bytes from fe80::3e97:eff:fe8b:f326: icmp_seq=2 ttl=64 time=0.047 ms
>
> 2. snmpagent listening to ipv6 address and community name 'public1' is ipv6
> rocommunity6 public1 default
> agentAddress udp:161,udp6:[::1]:161,tcp:161,tcp6:[::1]:161
>
> 3. ipv6 enabled
> ~$ net-snmp-config --configure
>  '--build=x86_64-linux-gnu' '--includedir=/usr/include'
> '--mandir=/usr/share/man' '--infodir=/usr/share/info'
> '--localstatedir=/var' '--libexecdir=/usr/lib/net-snmp'
> '--disable-maintainer-mode' '--disable-dependency-tracking' '--prefix=/usr'
> '--sysconfdir=/etc' '--mandir=/usr/share/man'
> '--with-persistent-directory=/var/lib/snmp'
> '--enable-ucd-snmp-compatibility' '--enable-shared' '--with-cflags=-g -O2
> -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security
> -DNETSNMP_USE_INLINE' '--with-perl-modules=INSTALLDIRS=vendor'
> '--enable-as-needed' *'--enable-ipv6'* '--with-logfile=none'
> '--without-rpm' '--with-libwrap' '--with-openssl' '--without-dmalloc'
> '--without-efence' '--without-rsaref' '--with-sys-contact=root'
> '--with-sys-location=Unknown' '--with-mib-modules=host smux ucd-snmp/dlmod
> ucd-snmp/diskio ucd-snmp/lmSensors  host' '--with-out-mib-modules='
> '--enable-mfd-rewrites' '--with-mnttab=/etc/mtab'
> '--with-mibdirs=/home/test/.snmp/mibs:/usr/share/mibs/site:/usr/share/snmp/mibs:/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmp'
> '--with-defaults' 'build_alias=x86_64-linux-gnu' 'CFLAGS=-g -O2
> -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security'
> 'LDFLAGS=-Wl,-Bsymbolic-functions -Wl,-z,relro'
> 'CPPFLAGS=-D_FORTIFY_SOURCE=2'
> pushpa@CLPMYSFC067:~$
>
> Please let me know for more details
>
> Thank you,
> Pushpa.T
>

------------------------------------------------------------------------------

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.