dot3HCStatsEntry MIB Specification

Satya Prakash Prasad <[email protected]>
Newsgroups gmane.network.net-snmp.user
Message-ID <CACX5wcj9Q=WktSJ0-dzjxyeFNmfdKhJVq9Wuk5PtZNPchsNC2A@mail.gmail.com>
I have a basic clarification on dot3HCStatsEntry MIBs definition. It says :

dot3HCStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot3HCStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing 64-bit versions of error ...

dot3HCStatsEntry OBJECT-TYPE
SYNTAX Dot3HCStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing 64-bit statistics for a
single ethernet-like interface."
INDEX { dot3StatsIndex }
::= { dot3HCStatsTable 1 }

Dot3HCStatsEntry ::=
SEQUENCE {
dot3HCStatsAlignmentErrors Counter64,
dot3HCStatsFCSErrors Counter64,
dot3HCStatsInternalMacTransmitErrors Counter64,
dot3HCStatsFrameTooLongs Counter64,
dot3HCStatsInternalMacReceiveErrors Counter64,
dot3HCStatsSymbolErrors Counter64
}

So the MIBs OIDs are :

1.3.6.1.2.1.10.7.2.1.1

1.3.6.1.2.1.10.7.11.1.1
1.3.6.1.2.1.10.7.11.1.2
1.3.6.1.2.1.10.7.11.1.3
1.3.6.1.2.1.10.7.11.1.4
1.3.6.1.2.1.10.7.11.1.5
1.3.6.1.2.1.10.7.11.1.6

The confusion I am having is over 1.3.6.1.2.1.10.7.2.1.1 and how
Dot3HCStatsEntry values should be rendered. Say there are 3 ifIndex so will
the output be like:

1.3.6.1.2.1.10.7.11.1.1.1
1.3.6.1.2.1.10.7.11.1.1.2
1.3.6.1.2.1.10.7.11.1.1.3
.........................
1.3.6.1.2.1.10.7.11.1.2.1

And for all other table element or:

1.3.6.1.2.1.10.7.2.1.1.1
1.3.6.1.2.1.10.7.11.1.1
1.3.6.1.2.1.10.7.11.1.2
1.3.6.1.2.1.10.7.11.1.3
1.3.6.1.2.1.10.7.11.1.4
1.3.6.1.2.1.10.7.11.1.5
1.3.6.1.2.1.10.7.11.1.6

Then

1.3.6.1.2.1.10.7.2.1.1.2
1.3.6.1.2.1.10.7.11.1.1
1.3.6.1.2.1.10.7.11.1.2
1.3.6.1.2.1.10.7.11.1.3
1.3.6.1.2.1.10.7.11.1.4
1.3.6.1.2.1.10.7.11.1.5
1.3.6.1.2.1.10.7.11.1.6

And

1.3.6.1.2.1.10.7.2.1.1.3
1.3.6.1.2.1.10.7.11.1.1
1.3.6.1.2.1.10.7.11.1.2
1.3.6.1.2.1.10.7.11.1.3
1.3.6.1.2.1.10.7.11.1.4
1.3.6.1.2.1.10.7.11.1.5
1.3.6.1.2.1.10.7.11.1.6

OR like:

1.3.6.1.2.1.10.7.11.1.1.1
1.3.6.1.2.1.10.7.11.1.1.2
1.3.6.1.2.1.10.7.11.1.1.3

For all dot3HCStatsEntry table elements?

Actuallty I am too confused with dot3StatsIndex and dot3HCStatsEntry. What
are the elements SNMP walk on this group will render.

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.