Re: splashd Not Redirecting

Can't speak for nocatsplash but this was my approach for nocatauth...

1. Make sure your gpg is the same version on the gateway AND the access
point. (I had to downgrade both versions of gpg).

2. Check location, ownership and file perms (600) of  trustedkeys.gpg.

3. Set/sync system time/date on both the access point and gateway (if the
system time is way out, you'll have problems with pgp keys).

The mailing lists seems to suggest ~90% of login loops and redirect failures
stem from key or certificate problems.

4. Turn on verbose logging on the AP and the gateway (from within the
nocat.conf)

5.  tail -f, the apache access and ssl-error logs as well as the nocat
access point logs.

6. Test, tweak and retest, while watching the logs. Then post any logged
error msgs back to this list.
Good luck

Rgds
Colin

On Mon, Nov 17, 2008 at 7:24 PM, Wilson Hernandez - MSD, S. A. <[email protected]
> wrote:

> Hello.
>
> I'm glad I found a mailing list for NoCat, hopefully there are still some
> users here.
>
> I've been trying to get configure nocatsplash for about a month now but,
> can't get it to work on a Etch. It captures the packet but it doesn't'
> redirect to the requested page. Can anyone help me with this please. Your
> assistance will be very appreciated.
>
> Thanks in advanced for your help.
>
> _______________________________________________
> NoCat mailing list
> [email protected]
> http://lists.nocat.net/mailman/listinfo/nocat
>



-- 
Colin A. White
P : +1 605 940 5863