Re: [c-nsp] 3750 taking errors on multiple ports

Randy Bush <[email protected]>
Newsgroups gmane.network.nsp.cisco
Message-ID <[email protected]> 
> some hours back, an antique Cisco WS-C3750G-POE-48 started taking output
> errors on multiple ports.  they are generally vlan edge, a la
> 
> interface GigabitEthernet1/0/31
>  description x.sea eth1
>  switchport access vlan 10

this was 'fixed' by turning vrrp and vrrp6 off on a junos m series
running 15 plugged into it.  going further down this rabbit hole.

randy
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.