Re: [c-nsp] Internet border router recommendations and experiences
Mark Tinka via cisco-nsp <[email protected]>
| Newsgroups | gmane.network.nsp.cisco |
|---|---|
| Message-ID | <[email protected]> |
On 2/23/23 21:34, Phil Bedard wrote: > The original question was around an Internet border router with 10G > support. We have devices like the 55A2-MOD-SE which is similar to > some other vendor devices (somewhat of a reference Broadcom design) > which we’ve seen be very popular in border router deployments where > you do not need a ton of bandwidth. > I think the OP came back to clarify that they need a 100Gbps-based router. > XRd runs in a container with very little memory, it doesn’t always > have to be “fat”. In fact some of the smaller 540 systems have very > little RP memory. > Not so much the memory footprint of the OS, but really, it's rather verbose architecture for high-touch areas like the Metro, for which the NCS540 was to replace the ASR920. Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/