Re: v 21.0.0

Thanks for the advice,  I did just use the GUI to create the requisition but following Ronny’s instructions the same thing happens.  I choose remove and the devices disappear from the requisition.  I then choose Synchronize requisition, and get the options Yes, DB Only, No and Cancel.  Doesn’t matter if I choose Yes or DB only and get the same results, The devices do not appear back in the requisition, it says 0 Nodes defined, 0 Nodes in Database. Now I chose to delete requisition and it disappears.

BUT

When I go back to the admin area and Manage Provisioning requisitions the Requisition has reappeared and the Nodes are defined again.


I will see how I get on with your additional instructions Jonathan




Colin Bell
Senior Solutions Architect (Technology)
Enterprise Architect Team
IT
Renfrewshire House, Cotton Street, Paisley, PA1 1HY<http://maps.renfrewshire.gov.uk/LocalView/Sites/MyCouncil/?identifyitem=layer1:0:OBJECTID:13&scale=2500&layers=layer1:0>
Mobile: 07796941786
Desk: 0141 618 4848
Email: [email protected]<mailto:[email protected]>
Web: Renfrewshire Council Website<http://www.renfrewshire.gov.uk/>

From: Jonathan Heard [mailto:[email protected]]
Sent: 15 November 2017 15:24
To: [email protected]
Subject: Re: [opennms-discuss] v 21.0.0


Hi Colin,

  I agree that what Ronny has suggested should work - However, if you're using any kind of automatic provisioning such as from VMWare ESXi or DNS (as would be configured in provisiond-configuration.xml) then deleted requisitions would be rediscovered every time the automatic provisioning runs until you disable it.

Assuming you just used the GUI to create a requisition and then add some hosts you should be able to get rid of it using Ronny's instructions. However as a last resort, you could stop the opennms service and delete /etc/import/<fs>.xml , /etc/import/pending/<fs>.xml , /etc/foreign-sources/<fs>.xml and /etc/foreign-sources/pending/<fs>.xml  (The 'pending' directories should be empty but I mention them in case they aren't)... Then when you restart OpenNMS the requisition should be complete gone.

Good Luck :-)

Jonathan

On 15/11/17 11:03, Ronny Trommer wrote:
Hi Colin,

first of all delete all nodes in the requisition. Synchronise the empty requisition and make sure you have 0 nodes in the database from your requisition. Afterwards you can delete the empty requisition.

Do you just use the Web UI to generate them?

On 15. Nov 2017, at 11:12, Colin Bell via opennms-discuss <[email protected]<mailto:[email protected]>> wrote:

Can anyone help with this? Is this actually a bug?



Colin Bell
Senior Solutions Architect (Technology)
Enterprise Architect Team
IT
Renfrewshire House, Cotton Street, Paisley, PA1 1HY<http://maps.renfrewshire.gov.uk/LocalView/Sites/MyCouncil/?identifyitem=layer1:0:OBJECTID:13&scale=2500&layers=layer1:0>
Mobile: 07796941786
Desk: 0141 618 4848
Email: [email protected]<mailto:[email protected]>
Web: Renfrewshire Council Website<http://www.renfrewshire.gov.uk/>

From: Colin Bell via opennms-discuss [mailto:[email protected]]
Sent: 13 November 2017 14:12
To: General OpenNMS Discussion <[email protected]<mailto:[email protected]>>
Cc: Colin Bell <[email protected]<mailto:[email protected]>>
Subject: Re: [opennms-discuss] v 21.0.0

Where to I find this synchronize?  Once I delete the requisition there is no option to synchronize.  Also after choosing the “remove all nodes”  the pop up says nodes have been removed and the requisition has been synchronized.


Why does the requisition keep re-appearing?  Along with the nodes?


Hi Colin,

you have to synchronize it. There is a button in the menu.

--
 Marcel

Am 10.11.2017 um 11:31 schrieb Colin Bell via opennms-discuss:
>
> Im setting up a new OpenNMS environment for the first time.
>
> I had created a new requisitioning but I would like to remove it.
> From the Admin section in the GUI I choose Manage Provisioning
> Requisitions, I then remove all nodes and deleted requisition.
>
> When I leave and come back to this page, the requisition returns.
> What am I missing?
>
> *Colin Bell*/


Colin Bell
Senior Solutions Architect (Technology)
Enterprise Architect Team
IT
Renfrewshire House, Cotton Street, Paisley, PA1 1HY<http://maps.renfrewshire.gov.uk/LocalView/Sites/MyCouncil/?identifyitem=layer1:0:OBJECTID:13&scale=2500&layers=layer1:0>
Mobile: 07796941786
Desk: 0141 618 4848
Email: [email protected]<mailto:[email protected]>
Web: Renfrewshire Council Website<http://www.renfrewshire.gov.uk/>

 ------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org<http://Slashdot.org>! http://sdm.link/slashdot_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-discuss mailing list

To *unsubscribe* or change your subscription options, see the bottom of this page:
https://lists.sourceforge.net/lists/listinfo/opennms-discuss





------------------------------------------------------------------------------

Check out the vibrant tech community on one of the world's most

engaging tech sites, Slashdot.org! http://sdm.link/slashdot




_______________________________________________

Please read the OpenNMS Mailing List FAQ:

http://www.opennms.org/index.php/Mailing_List_FAQ



opennms-discuss mailing list



To *unsubscribe* or change your subscription options, see the bottom of this page:

https://lists.sourceforge.net/lists/listinfo/opennms-discuss






Renfrewshire Council Website -http://www.renfrewshire.gov.uk

This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. Renfrewshire Council may, in accordance with the Telecommunications(Lawful Business Practice) (Interception of Communications) Regulations 2000, intercept e-mail messages for the purpose of monitoring or keeping a record of communications on the Council's system. If a message contains inappropriate dialogue it will automatically be intercepted by the Council's Internal Audit section who will decide whether or not the e-mail should be onwardly transmitted to the intended recipient(s).

[Paisley2021 Facebook]<http://www.paisley2021.co.uk/>

[Paisley2021 Facebook] /paisley2021 <https://www.facebook.com/paisley2021/>     [Paisley2021 Twitter]  @Paisley2021 <https://twitter.com/paisley2021>   [Paisley2021]  /paisley2021<https://www.instagram.com/paisley2021/>

Renfrewshire Council is decommissioning all gcsx email between now and November 2017. The Council email domain will change to @renfrewshire.gov.uk. My new email address will still allow me to send email to you securely as it meets the UK Government’s Secure Email Blueprint (SEB)

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot

_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-discuss mailing list

To *unsubscribe* or change your subscription options, see the bottom of this page:
https://lists.sourceforge.net/lists/listinfo/opennms-discuss