Re: pptpd problems

Hi,

here is some more information.

route -n :

Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.222.200 0.0.0.0         255.255.255.255 UH    0      0        0 ppp0
192.168.222.0   0.0.0.0         255.255.255.0   U     0      0        0 eth0
0.0.0.0         192.168.222.1   0.0.0.0         UG    0      0        0 eth0

pptp-server.log :

using channel 2
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x1 <mru 1482> <auth chap MS-v2> <magic 0x1358a170>]
rcvd [LCP ConfReq id=0x0 <mru 1400> <magic 0x48024770> <pcomp> <accomp> 
<callback CBCP>]
sent [LCP ConfRej id=0x0 <pcomp> <accomp> <callback CBCP>]
rcvd [LCP ConfReq id=0x1 <mru 1400> <magic 0x48024770>]
sent [LCP ConfAck id=0x1 <mru 1400> <magic 0x48024770>]
sent [LCP ConfReq id=0x1 <mru 1482> <auth chap MS-v2> <magic 0x1358a170>]
rcvd [LCP ConfAck id=0x1 <mru 1482> <auth chap MS-v2> <magic 0x1358a170>]
sent [LCP EchoReq id=0x0 magic=0x1358a170]
sent [CHAP Challenge id=0x19 <0c4a16aaca78fcb5689bc760885e6c07>, name = "pptpd"]
rcvd [LCP code=0xc id=0x2 48 02 47 70 4d 53 52 41 53 56 35 2e 32 30]
sent [LCP CodeRej id=0x2 0c 02 00 12 48 02 47 70 4d 53 52 41 53 56 35 2e 32 30]
rcvd [LCP code=0xc id=0x3 48 02 47 70 4d 53 52 41 53 2d 30 2d 4d 45 41 4e 4d 41 
43 48 49 4e 45]
sent [LCP CodeRej id=0x3 0c 03 00 1b 48 02 47 70 4d 53 52 41 53 2d 30 2d 4d 45 
41 4e 4d 41 43 48 49 4e 45]
rcvd [LCP code=0xc id=0x4 48 02 47 70 91 3c 18 9b 7e 6e 87 41 a6 aa aa cc c9 37 
47 4a]
sent [LCP CodeRej id=0x4 0c 04 00 18 48 02 47 70 91 3c 18 9b 7e 6e 87 41 a6 aa 
aa cc c9 37 47 4a]
rcvd [LCP EchoRep id=0x0 magic=0x48024770]
rcvd [CHAP Response id=0x19 
<97c35e52146cfb875ca79715993f3e490000000000000000b3134148727ecf32633c5db17c474167dfb3b0e4392f21b300>, 
name = "xxxxxx"]
Warning - secret file /etc/ppp/chap-secrets has world and/or group access
sent [CHAP Success id=0x19 "S=249A830785DF0B5A73DAB2D1A46F2569EA530DAB M=Access 
granted"]
sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
rcvd [IPV6CP ConfReq id=0x5 <addr fe80::c85c:a618:4540:e6ab>]
Unsupported protocol 0x8057 received
sent [LCP ProtRej id=0x5 80 57 01 05 00 0e 01 0a c8 5c a6 18 45 40 e6 ab]
rcvd [CCP ConfReq id=0x6 <mppe +H -M +S -L -D -C>]
sent [CCP ConfAck id=0x6 <mppe +H -M +S -L -D -C>]
rcvd [IPCP ConfReq id=0x7 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-wins 0.0.0.0> 
<ms-dns3 0.0.0.0> <ms-wins 0.0.0.0>]
sent [IPCP TermAck id=0x7]
rcvd [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
MPPE 128-bit stateless compression enabled
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 192.168.222.100>]
rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
sent [IPCP ConfReq id=0x2 <addr 192.168.222.100>]
rcvd [IPCP ConfAck id=0x2 <addr 192.168.222.100>]
rcvd [IPCP ConfReq id=0x8 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-wins 0.0.0.0> 
<ms-dns3 0.0.0.0> <ms-wins 0.0.0.0>]
sent [IPCP ConfRej id=0x8 <ms-dns1 0.0.0.0> <ms-wins 0.0.0.0> <ms-dns3 0.0.0.0> 
<ms-wins 0.0.0.0>]
rcvd [IPCP ConfReq id=0x9 <addr 0.0.0.0>]
sent [IPCP ConfNak id=0x9 <addr 192.168.222.200>]
rcvd [IPCP ConfReq id=0xa <addr 192.168.222.200>]
sent [IPCP ConfAck id=0xa <addr 192.168.222.200>]
found interface eth0 for proxy arp
local  IP address 192.168.222.100
remote IP address 192.168.222.200
Script /etc/ppp/ip-up started (pid 2456)
rcvd [proto=0xce1f] a8 3d 80 bc 10 bb a3 f2 0b b1 86 42 e8 3b 48 9d 6e 84 7c 24 
76 c0 6c 1e a0 86 50 56 f2 57 c2 86 ...
Unsupported protocol 0xce1f received
sent [LCP ProtRej id=0x6 ce 1f a8 3d 80 bc 10 bb a3 f2 0b b1 86 42 e8 3b 48 9d 
6e 84 7c 24 76 c0 6c 1e a0 86 50 56 f2 57 ...]
rcvd [proto=0x1f] 63 00 1f a2 79 06 e0 ae 63 64 30 60 69 09 77 51 47 b9 08 6f 4a 
1f 54 8d 29 73 cf c8 5c a6 f1 4e ...
Unsupported protocol 0x1f received
sent [LCP ProtRej id=0x7 00 1f 63 00 1f a2 79 06 e0 ae 63 64 30 60 69 09 77 51 
47 b9 08 6f 4a 1f 54 8d 29 73 cf c8 5c a6 ...]
rcvd [proto=0x4d] aa 37 74 92 84 96 dc 6e c3 50 45 a9 9c 0e bb 0e a5 df 60 56 77 
4d 34 8d cc 38 5d 43 a5 50 a5 61 ...
Modem hangup
Connect time 2.6 minutes.
Sent 4 bytes, received 10722 bytes.
Script /etc/ppp/ip-down started (pid 2533)
MPPE disabled
sent [LCP TermReq id=0x78 "MPPE disabled"]
Connection terminated.
Waiting for 1 child processes...
   script /etc/ppp/ip-down, pid 2533
Script /etc/ppp/ip-down finished (pid 2533), status = 0x1



Am 19.03.2010 21:35, schrieb Kief:
> Hi @ All,
>
> i successfully set up an pptpd server on my NSLU2 running Openwrt 8.09.2
> The NSLU2 is behind a WRT54GL router which is forwarding TCP1723&  GRE47.
> Everything is working so far, the clients can successfully logon over the
> internet to the pptpd server ->  tunnel is established.
> But then the troubles begin. According to
> http://poptop.sourceforge.net/dox/diagnose-forwarding.phtml the problems start
> at test #0
> The clients (Windows) are not able to ping the server and vice versa.
> I spent a lot of hours of reading differnet articles in the internet but i didnt
> find a solution right now.
>
> Here is my config:
> NSLU2
> Openwrt Kamikaze 8.09.2
> pptpd_1.3.0-1_armeb.ipk
>
> Hope someone can help me out with this.
>
> der_Kief
>
> ------------------------------------------------------------------------------
> Download Intel&#174; Parallel Studio Eval
> Try the new software tools for yourself. Speed compiling, find bugs
> proactively, and fine-tune applications for parallel performance.
> See why Intel Parallel Studio got high marks during beta.
> http://p.sf.net/sfu/intel-sw-dev
> _______________________________________________
> Poptop-server mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/poptop-server
>

------------------------------------------------------------------------------
Download Intel&#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev