Re: not connecting to server from Debian/Squeeze

Your /etc/ppp/options.pptp file has require mppe option?

On Wed, Jun 9, 2010 at 3:02 PM, Gary Dale <[email protected]> wrote:

> On 09/06/10 05:04 PM, Murat Sezgin wrote:
> > Unselect the below option in XP.
> >
> > "require all users to secure their passwords and data"
> ??? but my XP client connects OK
>
>
> >
> > Or enable Mppe in you client.
> My Debian/Squeeze client has the ppp-mppe module loaded.
>
> >
> > Murat
> >
> >
> >
> >
> >
> >
> > *Require all users to secure their passwords and data* check box.
> >
> >
> >
> > On Jun 9, 2010, at 13:08, Gary Dale <[email protected]
> > <mailto:[email protected]>> wrote:
> >
> >> I'm trying to connect to a remote Debian/Lenny server from a
> >> Debian/Squeeze desktop. I can do this from Windows XP using pptp so I'm
> >> confident the server is configured properly.
> >>
> >> I'm getting a "MPPE required, but MS-CHAP[v2] auth not performed."
> >> message. After turning on debug logging on the pon command, I find a
> >> sequence:
> >> sent [LCP ConfReq id=0x9 <asyncmap 0x0> <magic 0x62611f1e> <pcomp>
> >> <accomp>]
> >> rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic
> >> 0xc2135820> <pcomp> <accomp>]
> >> No auth is possible
> >> sent [LCP ConfRej id=0x1 <auth chap MS-v2>]
> >> rcvd [LCP ConfAck id=0x9 <asyncmap 0x0> <magic 0x62611f1e> <pcomp>
> >> <accomp>]
> >> rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0xc2135820> <pcomp>
> >> <accomp>]
> >> sent [LCP ConfAck id=0x2 <asyncmap 0x0> <magic 0xc2135820> <pcomp>
> >> <accomp>]
> >> sent [LCP EchoReq id=0x0 magic=0x62611f1e]
> >> MPPE required, but MS-CHAP[v2] auth not performed.
> >> sent [LCP TermReq id=0xa "MPPE required but not available"]
> >> rcvd [LCP EchoReq id=0x0 magic=0xc2135820]
> >> rcvd [LCP TermReq id=0x3 "peer refused to authenticate"]
> >> sent [LCP TermAck id=0x3]
> >> rcvd [LCP TermAck id=0xa]
> >>
> >> before getting disconnected. I believe the messages are showing a
> >> failure to negotiate an ms-chap v2 authentication. However, I'm not sure
> >> what is wrong. How do I get my workstation to accept ms-chap v2?
> >>
> >>
> >>
> ------------------------------------------------------------------------------
> >> ThinkGeek and WIRED's GeekDad team up for the Ultimate
> >> GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
> >> lucky parental unit.  See the prize list and enter to win:
> >> http://p.sf.net/sfu/thinkgeek-promo
> >> _______________________________________________
> >> Poptop-server mailing list
> >> [email protected]
> >> <mailto:[email protected]>
> >> https://lists.sourceforge.net/lists/listinfo/poptop-server
>
>
>
> ------------------------------------------------------------------------------
> ThinkGeek and WIRED's GeekDad team up for the Ultimate
> GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
> lucky parental unit.  See the prize list and enter to win:
> http://p.sf.net/sfu/thinkgeek-promo
> _______________________________________________
> Poptop-server mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/poptop-server
>



-- 
Murat Sezgin

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo

_______________________________________________
Poptop-server mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/poptop-server