Re: [rancid] [SPAM?] Cisco NX "chatty" with Power info

Vacheslav Zouhairy <[email protected]> Fri, 28 Jun 2019 08:12:44 +0300
Newsgroups	gmane.network.rancid
Message-ID	<[email protected]>
hmm i have almost the same hardware but your software is a bit newer,
but i do not get that in the output. it seems you will have to see what
command produces the offending output and tweak the nxos template not
to run that command
On Thu, 2019-06-27 at 11:14 -0400, FF wrote:
> Hi, 
> 
> Thanks for responding..
> 
> This is:
> 
> Software
>   BIOS: version 07.59
>   NXOS: version 7.0(3)I7(3)
>   BIOS compile time:  08/26/2016
>   NXOS image file is: bootflash:///nxos.7.0.3.I7.3.bin
>   NXOS compile time:  2/12/2018 13:00:00 [02/12/2018 19:13:48]
> 
> 
> Hardware
>   cisco Nexus9000 C93120TX Chassis
>   Intel(R) Core(TM) i3- CPU @ 2.50GHz with 16400992 kB of memory.
> 
> Thanks for your help!
> 
> 
> 
> On Thu, Jun 27, 2019 at 5:01 AM Vacheslav Zouhairy <
> [email protected]> wrote:
> > what model of nexus is this?
> > On Thu, 2019-06-27 at 00:07 -0400, FF wrote:
> > > ok, 
> > > 
> > > So upgraded to 3.9 with the same behavior.
> > > 
> > > Built a cisco-nxp personality that had an | exclude OK line on it
> > > to remove the wattage line... but suddenly rancid couldn't log in
> > > to those units.
> > > Even though clogin would work fine. Went and modified the cisco-
> > > nx definition... but the exclude is ignored.
> > > 
> > > So now 2.3 and 3.9 behave identically in this situation...
> > > 
> > > This is the whole output for the section in question:
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > Index: configs/10.10.10.114
> > > 
> > > =================================================================
> > > ==
> > > 
> > > retrieving revision 1.1157
> > > 
> > > diff -u -4 -r1.1157 10.10.10.114
> > > 
> > > @@ -80,10 +80,10 @@
> > > 
> > >   !Env: Power                              Actual        Total
> > > 
> > >   !Env: Supply    Model                    Input     
> > > Capacity       Status
> > > 
> > >   !Env:                                    (Watts
> > > )     (Watts )
> > > 
> > >   !Env:
> > > -------  ----------  ---------------  ------ 
> > > ----------  --------------------
> > > 
> > > - !Env: 1       
> > > N9K-PAC-1200W-B                    
> > > 192 W      1200 W      Ok
> > > 
> > > - !Env: 2       
> > > N9K-PAC-1200W-B                    
> > > 174 W      1200 W      Ok
> > > 
> > > + !Env: 1       
> > > N9K-PAC-1200W-B                    
> > > 190 W      1200 W      Ok
> > > 
> > > + !Env: 2       
> > > N9K-PAC-1200W-B                    
> > > 176 W      1200 W      Ok
> > > 
> > >   !Env: Power Usage
> > > Summary:
> > > 
> > >   !Env:
> > > --------------------
> > > 
> > >   !Env: Power
> > > Supply redundancy mode (configured)                PS-Redundant
> > > 
> > >   !Env: Power
> > > Supply redundancy mode (operational)               PS-Redundant
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > >  
> > > Any suggestions?
> > > 
> > > Thanks in advance!
> > > 
> > > 
> > > 
> > > On Mon, Mar 11, 2019 at 5:02 PM FF <[email protected]> wrote:
> > > > Apparently I'm running a massively old version (2.3.8). I'll
> > > > try upgrading to 3.9 first.
> > > > 
> > > > thanks in advance
> > > > 
> > > > On Mon, Mar 11, 2019 at 4:47 PM heasley <[email protected]>
> > > > wrote:
> > > > > Fri, Mar 08, 2019 at 07:06:45PM +0000, Nick Nauwelaerts:
> > > > > 
> > > > > > what version of rancid & nx-os are you running?
> > > > > 
> > > > > 
> > > > > 
> > > > > good question.
> > > > > 
> > > > > 
> > > > > 
> > > > > if the answer is 3.9, please show us the complete output of
> > > > > show environment power
> > > > > 
> > > > > 
> > > > > 
> > > > > > i notice you only have 1 column less as me, you seem to
> > > > > miss "actual output".
> > > > > 
> > > > > > 
> > > > > 
> > > > > > 
> > > > > 
> > > > > > // nick
> > > > > 
> > > > > > 
> > > > > 
> > > > > > 
> > > > > 
> > > > > > 
> > > > > 
> > > > > > 
> > > > > 
> > > > > > From: Rancid-discuss [mailto:
> > > > > [email protected]] On Behalf Of FF
> > > > > 
> > > > > > Sent: Friday, March 8, 2019 18:05
> > > > > 
> > > > > > To: [email protected]
> > > > > 
> > > > > > Subject: [SPAM?] [rancid] Cisco NX "chatty" with Power info
> > > > > 
> > > > > > 
> > > > > 
> > > > > > 
> > > > > 
> > > > > > !Env: Power                              Actual       
> > > > > Total
> > > > > 
> > > > > > 
> > > > > 
> > > > > >   !Env: Supply    Model                    Input     
> > > > > Capacity       Status
> > > > > 
> > > > > > 
> > > > > 
> > > > > >   !Env:                                    (Watts )   
> > > > >  (Watts )
> > > > > 
> > > > > > 
> > > > > 
> > > > > >   !Env: -------  ----------  ---------------  ------  ---
> > > > > -------  --------------------
> > > > > 
> > > > > > 
> > > > > 
> > > > > > - !Env: 1        N9K-PAC-1200W-B                     180 W 
> > > > >     1200 W      Ok
> > > > > 
> > > > > > 
> > > > > 
> > > > > > + !Env: 1        N9K-PAC-1200W-B                     182 W 
> > > > >     1200 W      Ok
> > > > > 
> > > > > > 
> > > > > 
> > > > > >   !Env: 2        N9K-PAC-1200W-B                     162 W 
> > > > >     1200 W      Ok
> > > > > 
> > > > > > 
> > > > > 
> > > > > >   !Env: Power Usage Summary:
> > > > > 
> > > > > > 
> > > > > 
> > > > > > Every time Rancid runs, we get erroneous reports because
> > > > > the power usage fluctuates by 1-2 watts per run. Any
> > > > > suggestions on how to keep the good information
> > > > > (availability, etc) without getting this level of detail?
> > > > > 
> > > > > > 
> > > > > 
> > > > > > thanks in advance!
> > > > > 
> > > > > > 
> > > > > 
> > > > > > 
> > > > > 
> > > > > > --
> > > > > 
> > > > > > FF
> > > > > 
> > > > > > 
> > > > > 
> > > > > > ________________________________
> > > > > 
> > > > > > 
> > > > > 
> > > > > > Volg Aquafin op Facebook<https://www.facebook.com/AquafinNV
> > > > > > | Twitter<https://twitter.com/aquafinnv> | YouTube<
> > > > > http://www.youtube.com/channel/UCk_4P5BJ-MtEEDCkCsR_KqQ?feature=mhee
> > > > > > | LinkedIN<http://www.linkedin.com/company/aquafin/products
> > > > > > | Instagram<https://www.instagram.com/aquafin_nv/>
> > > > > 
> > > > > > 
> > > > > 
> > > > > > In het kader van de uitoefening van onze taken verzamelen
> > > > > we bij Aquafin persoonsgegevens. Hoe we omgaan met deze
> > > > > gegevens en wat de rechten van de betrokkenen zijn, kan je
> > > > > nalezen in onze privacy policy<
> > > > > https://www.aquafin.be/nl-be/privacy-policy>;.
> > > > > 
> > > > > > 
> > > > > 
> > > > > >   P Denk aan het milieu. Druk deze mail niet onnodig af.
> > > > > 
> > > > > 
> > > > > 
> > > > > > _______________________________________________
> > > > > 
> > > > > > Rancid-discuss mailing list
> > > > > 
> > > > > > [email protected]
> > > > > 
> > > > > > http://www.shrubbery.net/mailman/listinfo/rancid-discuss
> > > > > 
> > > > > 
> > > > > 
> > > > 
> > > > -- 
> > > > FF
> > > 
> > > _______________________________________________Rancid-discuss
> > > mailing [email protected]
> > > http://www.shrubbery.net/mailman/listinfo/rancid-discuss

_______________________________________________
Rancid-discuss mailing list
[email protected]
http://www.shrubbery.net/mailman/listinfo/rancid-discuss