Re: Smart card: unlock a WinXP session

Peter Åstrand <[email protected]>
Newsgroups gmane.network.rdesktop.user
Message-ID <[email protected]>
Does it work as expected with the Microsoft RDP client?

Regards,
Peter

On Mon, 12 Jan 2009, Emmanuel Ledoux wrote:

> Hi,
> 
> After a Windows XP session has been locked I can not use the smart card to unlock the session anymore.
> 
> 
> Using the smart card I can log on Windows. Then when I remove the card, the session is locked (This works just fine according the "Smart card
> removal behavior" setting). The problem is that I can not unlock the session thanks to the smart card, I have to put the full credentials (username
> + password).
> 
> Is it a known issue ?
> 
> 
> 
> I use rdesktop 1.6.0 recompiled with the smart card support.
> 
> The smart card as detected by pcsd:
> 
> 03651241 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x08E6, PID: 0x3437
> 00000098 hotplug_libhal.c:342:HPAddDevice() Adding USB device: usb_device_8e6_3437_noserial_if0
> 01001112 readerfactory.c:1082:RFInitializeReader() Attempting startup of Gemplus GemPC Twin 00 00 using
> /usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so
> 00000388 readerfactory.c:949:RFBindFunctions() Loading IFD Handler 3.0
> 00000088 ifdhandler.c:1323:init_driver() Driver version: 1.3.8
> 00000546 ifdhandler.c:1336:init_driver() LogLevel: 0x0003
> 00000463 ifdhandler.c:1356:init_driver() DriverOptions: 0x0000
> 00000018 ifdhandler.c:81:IFDHCreateChannelByName() lun: 0, device:
> usb:08e6/3437:libhal:/org/freedesktop/Hal/devices/usb_device_8e6_3437_noserial_if0
> 00157735 ccid_usb.c:236:OpenUSBByName() Manufacturer: Ludovic Rousseau ([email protected])
> 00000167 ccid_usb.c:246:OpenUSBByName() ProductString: Generic CCID driver
> 00000152 ccid_usb.c:252:OpenUSBByName() Copyright: This driver is protected by terms of the GNU Lesser General Public License version 2.1, or (at
> your option) any later version.
> 00000931 ccid_usb.c:408:OpenUSBByName() Found Vendor/Product: 08E6/3437 (Gemplus GemPC Twin)
> 00000008 ccid_usb.c:410:OpenUSBByName() Using USB bus/device: 004/005
> 00004795 ccid_usb.c:816:get_data_rates() declared: 10753 bps
> 00000009 ccid_usb.c:816:get_data_rates() declared: 14337 bps
> (...)
> 00001815 ifdhandler.c:307:IFDHGetCapabilities() lun: 0, tag: 0xFB0
> 00000009 readerfactory.c:267:RFAddReader() Using the pcscd polling thread
> 00002005 ifdhandler.c:307:IFDHGetCapabilities() lun: 0, tag: 0xFAE
> 00000009 ifdhandler.c:353:IFDHGetCapabilities() Reader supports 1 slot(s)
> 00004095 ifdhandler.c:924:IFDHPowerICC() lun: 0, action: PowerUp
> 00075942 Card ATR: 3B 16 96 41 73 74 72 69 64
> 
> 
>


---
Peter Åstrand		ThinLinc Chief Developer
Cendio AB		http://www.cendio.com
Wallenbergs gata 4
583 30 Linköping	Phone: +46-13-21 46 00

------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword

_______________________________________________
rdesktop-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/rdesktop-users
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.