AW: Disconnects from server after authentication key validation

Tim,

we had a problem like yours, and there we found two things.
We had install openssh new on this machine, and there was no
cygwin1.dll file installed, and the other was that the right
for the files was not defined, we see only question marks for
owner and for group. The first was seeing, when you open a command
window on your windows machine, go to the openssh/bin directory, and
run the ls command.
We have tested some different versions from openssh, and found a 
other software, which works better. We are using http://www.itefix.no/phpws/
copssh 1.4.2, which is a newer version of the openssh.

Regards,

Berthold

-----Ursprüngliche Nachricht-----
Von: [email protected] [mailto:[email protected]] Im Auftrag von Tim Brazil
Gesendet: Dienstag, 10. Juli 2007 05:45
An: [email protected]
Betreff: Disconnects from server after authentication key validation

Hi All

I'm new to the list. Unfortunately I arrive with a problem I'm trying to solve. I installed the Windows openssh port on a Windows XP Professional machine. I initially setup simple password authentication which worked well. I tested if both from a Linux and OSX client.

I then setup authorization keys using ssh_keygen. I generated the public key on one of my *NIX machines and copied it over to the Windows box and then attempted to connect. I can see that it makes the connection successfully, authenticates the dsa key, appears to send the environment and then bam... it disconnects from the server with some "channel 0" 
chatter. I don't know what it's failing on.

I tried setting different sshd_config options to no avail. I did set StrictModes off as recommended. I also turned off PermitUserEnvironment. 
I'm still having problems. Does anyone have a suggestion?

TIA - Tim

 > ssh -v -v linux-tbrazil
OpenSSH_3.9p1, OpenSSL 0.9.7e 25 Oct 2004
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to linux-tbrazil [10.0.0.238] port 22.
debug1: Connection established.
debug1: identity file /home/tbrazil/.ssh/identity type -1
debug1: identity file /home/tbrazil/.ssh/id_rsa type -1
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug2: key_type_from_name: unknown key type '-----END'
debug1: identity file /home/tbrazil/.ssh/id_dsa type 2
debug1: Remote protocol version 2.0, remote software version
OpenSSH_3.8.1p1
debug1: match: OpenSSH_3.8.1p1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.9p1
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: 
diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 

debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: 
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr 

debug2: kex_parse_kexinit: 
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr 

debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 

debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 

debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: 
diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: 
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr 

debug2: kex_parse_kexinit: 
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr 

debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 

debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 

debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 138/256
debug2: bits set: 513/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host 'linux-tbrazil' is known and matches the RSA host key.
debug1: Found key in /home/tbrazil/.ssh/known_hosts:1
debug2: bits set: 527/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/tbrazil/.ssh/identity ((nil))
debug2: key: /home/tbrazil/.ssh/id_rsa ((nil))
debug2: key: /home/tbrazil/.ssh/id_dsa (0x558160)
debug1: Authentications that can continue: 
publickey,password,keyboard-interactive
debug1: Next authentication method: publickey
debug1: Trying private key: /home/tbrazil/.ssh/identity
debug1: Trying private key: /home/tbrazil/.ssh/id_rsa
debug1: Offering public key: /home/tbrazil/.ssh/id_dsa
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-dss blen 434
debug2: input_userauth_pk_ok: fp
8c:f7:f3:52:d6:c1:b3:a3:fb:1a:bc:32:07:5b:07:0e
debug1: read PEM private key done: type DSA
debug1: Authentication succeeded (publickey).
debug1: channel 0: new [client-session]
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: client_session2_setup: id 0
debug2: channel 0: request pty-req confirm 0
debug1: Sending environment.
debug1: Sending env LANG = en_US.UTF-8
debug2: channel 0: request env confirm 0
debug2: channel 0: request shell confirm 0
debug2: fd 3 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel 0: rcvd adjust 131072
Last login: Mon Jul  9 17:25:23 2007 from plopt4.perforce.com
debug2: channel 0: rcvd eof
debug2: channel 0: output open -> drain
debug2: channel 0: obuf empty
debug2: channel 0: close_write
debug2: channel 0: output drain -> closed
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug2: channel 0: rcvd close
debug2: channel 0: close_read
debug2: channel 0: input open -> closed
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 1 Connection to linux-tbrazil closed.
debug1: Transferred: stdin 0, stdout 0, stderr 37 bytes in 0.3 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 141.1
debug1: Exit status 255

--
List Info:      http://erdelynet.com/ssh-l/
List Archives:  http://erdelynet.com/archive/ssh-l/
To Unsubscribe: Mail mailto:[email protected]




--
List Info:      http://erdelynet.com/ssh-l/
List Archives:  http://erdelynet.com/archive/ssh-l/
To Unsubscribe: Mail mailto:[email protected]