Re: Problem with stunnel 5.51

Christopher Schultz <[email protected]> Wed, 8 May 2019 15:06:08 -0400

Newsgroups	gmane.network.stunnel.user
Message-ID	<[email protected]>

Carter,

On 5/8/19 14:47, Carter Browne wrote:
> I received the following error trying to connect to a Windows host using
> RDP.  I use stunnel as a connection point with secure messages coming in
> and then forwarded as secure messages going the desired end point. 
> Stunnel is running on all three systems, the originator, the relay, and
> the destination.  I have been using stunnel in this role for many
> years.  As an additional point, 5.51 did work properly in the same role
> for secure telnet.  The part of the log showing the failure is below.

Can you try again with stunnel 5.53? It looks like both 5.51 and 5.52
have some serious problems and maybe shouldn't be used in production.

-chris

_______________________________________________
stunnel-users mailing list
[email protected]
https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

signature.asc (application/pgp-signature, 899 B)