Re: Problem with stunnel 5.51

Chris,

I've stopped building my own copy,  I'll give 5.53 a try when 
archlinuxarm releases it.  The arch linux group is very much leading 
edge, so I expect it will be soon.

Thanks,
Carter

On 5/8/2019 3:06 PM, Christopher Schultz wrote:
> Carter,
>
> On 5/8/19 14:47, Carter Browne wrote:
>> I received the following error trying to connect to a Windows host using
>> RDP.  I use stunnel as a connection point with secure messages coming in
>> and then forwarded as secure messages going the desired end point.
>> Stunnel is running on all three systems, the originator, the relay, and
>> the destination.  I have been using stunnel in this role for many
>> years.  As an additional point, 5.51 did work properly in the same role
>> for secure telnet.  The part of the log showing the failure is below.
> Can you try again with stunnel 5.53? It looks like both 5.51 and 5.52
> have some serious problems and maybe shouldn't be used in production.
>
> -chris
>
>
> _______________________________________________
> stunnel-users mailing list
> [email protected]
> https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

_______________________________________________
stunnel-users mailing list
[email protected]
https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users