Re: VNC

I have the same problem.  This is usually a DNS problem.  This occurs 
when a new IP address is issued via DHCP and the DNS has not received 
and/or published the new IP address to the environment, or there are 2 
IP addresses for the same name in the DNS server.


*Patrick Shoaf*
IT Special Projects
[email protected] <mailto:[email protected]>

*Model Cleaners, Uniforms & Apparel
Model Ohio Enterprises dba The Fussy Cleaners*
100 Third Street
Charleroi, PA 15022
Direct Dial: 724-565-2033
724-489-4386 Fax
www.modelcleaners.com <http://www.modelcleaners.com>
www.modelapparel.com <http://www.modelapparel.com>
www.modeluniforms.com <http://www.modeluniforms.com>
www.thefussycleaners.com <http://www.thefussycleaners.com>

On 9/6/2016 8:23 AM, Holley, Atemia wrote:
>
>
> When I attempt to vnc to some of my computers.  It remotes onto 
> another computer on the network.  The standard way we remote into a 
> device is by the computer name and sometimes by ip address.  This 
> issue normally happens when I go to remote by computer name.  Can 
> anyone help me resolve this?
>
>
>
> Technically yours,
>
> Atemia Holley, System/Network Administrator
>
> Redford Union School District
>
> [email protected] <mailto:[email protected]>
>
> (313)242-4257 – office
>
> (313)721-0158 - cell
>
>
>
>
> ------------------------------------------------------------------------
> *From:* [email protected] 
> <[email protected]>
> *Sent:* Friday, September 2, 2016 12:31 PM
> *To:* [email protected]
> *Subject:* VNC-Tight-list Digest, Vol 120, Issue 1
> Send VNC-Tight-list mailing list submissions to
>         [email protected]
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.sourceforge.net/lists/listinfo/vnc-tight-list
> or, via email, send a message with subject or body 'help' to
>         [email protected]
>
> You can reach the person managing the list at
>         [email protected]
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of VNC-Tight-list digest..."
>
>
> Today's Topics:
>
>    1. Re: Change desktop when remote connection is established
>       (Marco Gaiarin)
>    2. hard to get past 1st screen (Jeff Smith)
>    3. Re: hard to get past 1st screen (Jan Kandziora)
>    4. Re: hard to get past 1st screen (Michael D. Setzer II)
>    5. Re: hard to get past 1st screen (David Ranch)
>    6. Re: hard to get past 1st screen (Jeff Smith)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 31 Aug 2016 09:30:53 +0200
> From: Marco Gaiarin <[email protected]>
> Subject: Re: Change desktop when remote connection is established
> To: [email protected]
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset=iso-8859-1
>
> Mandi! Randy Dover
>   In chel di` si favelave...
>
> > I remember seeing that section. Can I set that through a scripted 
> install
> > (pushing the msi file)?
>
> All settings go to the registry 
> (HKEY_LOCAL_MACHINE\SOFTWARE\TightVNC\Server).
>
> So you can setup a box, export the registry and import elsewhere.
>
> -- 
> dott. Marco Gaiarin GNUPG Key ID: 240A3D66
>   Associazione ``La Nostra Famiglia'' http://www.lanostrafamiglia.it/ 
> <http://www.lanostrafamiglia.it/>
>   Polo FVG   -   Via della Bont?, 7 - 33078   -   San Vito al 
> Tagliamento (PN)
>   marco.gaiarin(at)lanostrafamiglia.it   t +39-0434-842711   f 
> +39-0434-842797
>
>                 Dona il 5 PER MILLE a LA NOSTRA FAMIGLIA!
> http://www.lanostrafamiglia.it/25/index.php/component/k2/item/123
>         (cf 00307430132, categoria ONLUS oppure RICERCA SANITARIA)
>
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 2 Sep 2016 09:44:27 -0400
> From: Jeff Smith <[email protected]>
> Subject: hard to get past 1st screen
> To: [email protected]
> Message-ID:
> <CAFeP8y2xrkM0+6qbrYzMH3rzxUdw8sUG58fUfzfv7OhvUmeUOg@mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I am trying to VNC to a Linux VM that has been set up for VNC. I can ssh
> into the command line interface of this VM with no problem. I can VNC to
> the same VM but the first thing I see is a colorfully tiled window with a
> date and time. I cannot figure out what combination of keys bring me past
> this tiled window. Has anyone seen this before?
> -------------- next part --------------
> An HTML attachment was scrubbed...
>
> ------------------------------
>
> Message: 3
> Date: Fri, 2 Sep 2016 16:20:57 +0200
> From: Jan Kandziora <[email protected]>
> Subject: Re: hard to get past 1st screen
> To: [email protected]
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset=windows-1252
>
> Am 02.09.2016 um 15:44 schrieb Jeff Smith:
> > I am trying to VNC to a Linux VM that has been set up for VNC. I can
> > ssh into the command line interface of this VM with no problem. I can
> > VNC to the same VM but the first thing I see is a colorfully tiled
> > window with a date and time. I cannot figure out what combination of
> > keys bring me past this tiled window. Has anyone seen this before?
> >
> >
> It would help if you uploaded a screenshot somewhere and link it here.
>
> But I think your VM is set up that way it creates a new X session for
> any VNC client connecting, and displays that new X session via VNC. In
> that case, what you see is the X login screen of the Linux inside the VM.
>
> Kind regards
>
>         Jan
>
>
>
> ------------------------------
>
> Message: 4
> Date: Sat, 03 Sep 2016 01:48:48 +1000
> From: "Michael D. Setzer II" <[email protected]>
> Subject: Re: hard to get past 1st screen
> To: Jeff Smith <[email protected]>,
>         [email protected]
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset=US-ASCII
>
> Sounds like the screen saver blind. You move the mouse to the bottom
> center of screen, click and hold, then drag the blind up to show what was
> behind the blind.
>
> They put that in a couple versions ago, and it took some time to 
> figure it out.
> Don't know how VNC would show it, but on the real screen it shows a 
> little
> arrow going up in the bottom center to kind of give you the ideal.
>
> On 2 Sep 2016 at 9:44, Jeff Smith wrote:
>
> From:   Jeff Smith <[email protected]>
> Date sent:      Fri, 2 Sep 2016 09:44:27 -0400
> Subject:        hard to get past 1st screen
> To:     [email protected]
>
> >
> > I am trying to VNC to a Linux VM that has been set up for VNC. I can 
> ssh into the command line
> > interface of this VM with no problem. I can VNC to the same VM but 
> the first thing I see is a
> > colorfully tiled window with a date and time. I cannot figure out 
> what combination of keys bring
> > me past this tiled window. Has anyone seen this before?
>
>
> +----------------------------------------------------------+
>   Michael D. Setzer II -  Computer Science Instructor
>   Guam Community College  Computer Center
> mailto:[email protected]
> mailto:[email protected]
>   Guam - Where America's Day Begins
>   G4L Disk Imaging Project maintainer
> http://sourceforge.net/projects/g4l/
> +----------------------------------------------------------+
>
> http://setiathome.berkeley.edu (Original)
> Number of Seti Units Returned:  19,471
> Processing time:  32 years, 290 days, 12 hours, 58 minutes
> (Total Hours: 287,489)
>
> BOINC@HOME CREDITS
> ABC         16613838.513356 | EINSTEIN 110901257.788695
> ROSETTA     47903540.534018 | SETI 90823350.103165
>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Fri, 2 Sep 2016 09:27:17 -0700
> From: David Ranch <[email protected]>
> Subject: Re: hard to get past 1st screen
> To: Jeff Smith <[email protected]>,
>         [email protected]
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset="windows-1252"
>
>
> This sounds like a new Gnome3 desktop you're trying to log into.  As
> such, hit the space bar to get to a login prompt.  Btw, I think this is
> hugely intuitive as it doesn't say what to do at all!
>
> --David
>
>
> On 09/02/2016 06:44 AM, Jeff Smith wrote:
> > I am trying to VNC to a Linux VM that has been set up for VNC. I can
> > ssh into the command line interface of this VM with no problem. I can
> > VNC to the same VM but the first thing I see is a colorfully tiled
> > window with a date and time. I cannot figure out what combination of
> > keys bring me past this tiled window. Has anyone seen this before?
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
>
> ------------------------------
>
> Message: 6
> Date: Fri, 2 Sep 2016 12:31:37 -0400
> From: Jeff Smith <[email protected]>
> Subject: Re: hard to get past 1st screen
> To: "Michael D. Setzer II" <[email protected]>
> Cc: [email protected]
> Message-ID:
> <CAFeP8y1Q=keHGMwxhA6NGh_pbExiLGOkVEX4byYPks=9=QTv0g@mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> That was it. Thanks.
>
>
> On Fri, Sep 2, 2016 at 11:48 AM, Michael D. Setzer II <
> [email protected]> wrote:
>
> > Sounds like the screen saver blind. You move the mouse to the bottom
> > center of screen, click and hold, then drag the blind up to show 
> what was
> > behind the blind.
> >
> > They put that in a couple versions ago, and it took some time to 
> figure it
> > out.
> > Don't know how VNC would show it, but on the real screen it shows a 
> little
> > arrow going up in the bottom center to kind of give you the ideal.
> >
> > On 2 Sep 2016 at 9:44, Jeff Smith wrote:
> >
> > From:   Jeff Smith <[email protected]>
> > Date sent:      Fri, 2 Sep 2016 09:44:27 -0400
> > Subject:        hard to get past 1st screen
> > To:     [email protected]
> >
> > >
> > > I am trying to VNC to a Linux VM that has been set up for VNC. I 
> can ssh
> > into the command line
> > > interface of this VM with no problem. I can VNC to the same VM but the
> > first thing I see is a
> > > colorfully tiled window with a date and time. I cannot figure out what
> > combination of keys bring
> > > me past this tiled window. Has anyone seen this before?
> >
> >
> > +----------------------------------------------------------+
> >   Michael D. Setzer II -  Computer Science Instructor
> >   Guam Community College  Computer Center
> > mailto:[email protected]
> > mailto:[email protected]
> >   Guam - Where America's Day Begins
> >   G4L Disk Imaging Project maintainer
> > http://sourceforge.net/projects/g4l/
> > +----------------------------------------------------------+
> >
> > http://setiathome.berkeley.edu (Original)
> > Number of Seti Units Returned:  19,471
> > Processing time:  32 years, 290 days, 12 hours, 58 minutes
> > (Total Hours: 287,489)
> >
> > BOINC@HOME CREDITS
> > ABC         16613838.513356 | EINSTEIN 110901257.788695
> > ROSETTA     47903540.534018 | SETI 90823350.103165
> >
> >
>
>
> -- 
> *Jeffrey Smith, PhD*
> Chief Systems Engineer
> Multi Agency Collaboration Environment (MACE)
> Sierra Nevada Corporation
> 3076 Centreville Road, Herndon, VA 20171
> 703-464-6434 (Office)
> 603-566-0124 (Cell)
> [email protected]
> -------------- next part --------------
> An HTML attachment was scrubbed...
>
> ------------------------------
>
> ------------------------------------------------------------------------------
>
>
> ------------------------------
>
> ___________________________________________________________
> TightVNC mailing list, [email protected]
> To change your subscription or to UNSUBSCRIBE, please visit
> https://lists.sourceforge.net/lists/listinfo/vnc-tight-list
>
>
> End of VNC-Tight-list Digest, Vol 120, Issue 1
> **********************************************
>
>
> ------------------------------------------------------------------------------
>
>
> ___________________________________________________________
> TightVNC mailing list, [email protected]
> To change your subscription or to UNSUBSCRIBE, please visit
> https://lists.sourceforge.net/lists/listinfo/vnc-tight-list

------------------------------------------------------------------------------

___________________________________________________________
TightVNC mailing list, [email protected]
To change your subscription or to UNSUBSCRIBE, please visit
https://lists.sourceforge.net/lists/listinfo/vnc-tight-list

begin:vcard
fn:Patrick Shoaf
n:Shoaf;Patrick
org:Model Cleaners Uniforms & Apparel;IT Dept
adr:;;100 Third Street;Charleroi;PA;15022;USA
email;internet:[email protected]
title:IT Manager
tel;work:724-565-2033
tel;fax:724-565-2110
tel;cell:724-366-9154
x-mozilla-html:TRUE
url:http://www.modelcleaners.com
version:2.1
end:vcard